Problem Z Powierzchnią Dyskową

[krupek]

Problem polega na tym ze mam na Dom-0 są jakieś tam wirtualne maszyny prawidłowo działające. Wpadłem na pomysł doinstalować jeszcze jedną stworzyłem sobie kolejnego lvm-a gdzie przydzieliłem nowy virt.-system. Podczas instalacji a konkretnie kopiowania paczek na dysk, dwie wcześniej poprawnie działające maszyny się zawiesiły. Odkryłem że ta sytuacja mam miejsce nie tylko podczas instalacji ale tak że, wtedy jak kopiuje coś ma DOM-0 np. (np. film). Nie ma znaczenia czy systemy jest na lvm czy w pliku. Taki sam problem mam na 2 fizycznych serwerach obydwa są podpięte do macierzy przez kartę FC.

 

POMOCY

[Gość _PaT]

W jaki sposób montujesz zasoby na macierzy dyskowej? Czy czasem nie dochodzi do jakiegoś dead-locka?

 

Powklejaj logi z dom0 i domU.

dmesg

/var/log/messages

/var/log/xen/xend.log

i cokolwiek ciekawego znajdziesz.

 

Jeśli możesz, podaj też co to za sprzęt.

[krupek]

Witam

 

o 9:50 da DOM-0 do nowo podmontowanego LVM kopiowalem plik (dd if=/dev/zero of=/mnt/plik)

 

logi z dom-0

xend.log

[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:476) hotplugStatusCallback /local/domain/0/backend/vbd/2/5632/hotplug-status.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:490) hotplugStatusCallback 1.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices irq.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices vkbd.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices vfb.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices pci.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices ioports.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices tap.
[2008-12-11 08:07:08 xend 3467] DEBUG (DevController:143) Waiting for devices vtpm.
[2008-12-11 08:07:08 xend 3467] INFO (XendDomain:380) Domain POSTGRES_1 (2) unpaused.
[2008-12-18 10:01:24 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:989) XendDomainInfo.handleShutdownWatch
[2008-12-18 10:01:24 xend.XendDomainInfo 3467] INFO (XendDomainInfo:1025) HVM save:remote shutdown dom 2!
[2008-12-18 10:01:47 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:1560) XendDomainInfo.destroy: domid=2
[2008-12-18 10:01:47 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:1568) XendDomainInfo.destroyDomain(2)
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:200) XendDomainInfo.create(['vm', ['name', 'POSTGRES_1'], ['memory', 512], ['maxmem', 1024], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['uuid', 'af73a3d0-052c-8c87-92eb-d8b55f8f8589'], ['image', ['hvm', ['kernel', '/usr/lib/xen/boot/hvmloader'], ['device_model', '/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1], ['boot', 'c'], ['serial', 'pty'], ['vnc', 1], ['vncunused', 1], ['xauthority', '/root/.Xauthority'], ['acpi', 1], ['apic', 1]]], ['device', ['vbd', ['uname', 'phy:/dev/grupavol/Vol2'], ['dev', 'hda'], ['mode', 'w']]], ['device', ['vbd', ['uname', ''], ['dev', 'hdc:cdrom'], ['mode', 'r']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:0a:5e:61']]]])
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:306) parseConfig: config is ['vm', ['name', 'POSTGRES_1'], ['memory', 512], ['maxmem', 1024], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['uuid', 'af73a3d0-052c-8c87-92eb-d8b55f8f8589'], ['image', ['hvm', ['kernel', '/usr/lib/xen/boot/hvmloader'], ['device_model', '/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1], ['boot', 'c'], ['serial', 'pty'], ['vnc', 1], ['vncunused', 1], ['xauthority', '/root/.Xauthority'], ['acpi', 1], ['apic', 1]]], ['device', ['vbd', ['uname', 'phy:/dev/grupavol/Vol2'], ['dev', 'hda'], ['mode', 'w']]], ['device', ['vbd', ['uname', ''], ['dev', 'hdc:cdrom'], ['mode', 'r']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:0a:5e:61']]]]
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:411) parseConfig: result is {'shadow_memory': None, 'start_time': None, 'uuid': 'af73a3d0-052c-8c87-92eb-d8b55f8f8589', 'on_crash': 'restart', 'on_reboot': 'restart', 'localtime': None, 'image': ['hvm', ['kernel', '/usr/lib/xen/boot/hvmloader'], ['device_model', '/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1], ['boot', 'c'], ['serial', 'pty'], ['vnc', 1], ['vncunused', 1], ['xauthority', '/root/.Xauthority'], ['acpi', 1], ['apic', 1]], 'on_poweroff': 'destroy', 'bootloader_args': None, 'cpus': None, 'name': 'POSTGRES_1', 'backend': [], 'vcpus': 1, 'cpu_weight': None, 'features': None, 'vcpu_avail': None, 'memory': 512, 'device': [('vbd', ['vbd', ['uname', 'phy:/dev/grupavol/Vol2'], ['dev', 'hda'], ['mode', 'w']]), ('vbd', ['vbd', ['uname', ''], ['dev', 'hdc:cdrom'], ['mode', 'r']]), ('vif', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:0a:5e:61']])], 'bootloader': None, 'cpu': None, 'maxmem': 1024}
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:1350) XendDomainInfo.construct: None
[2008-12-18 10:01:56 xend 3467] DEBUG (balloon:127) Balloon: 543636 KiB free; need 2048; done.
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:1398) XendDomainInfo.initDomain: 3 1.0
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: boot, val: c
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: fda, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: fdb, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: soundhw, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: localtime, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: serial, val: pty
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: std-vga, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: isa, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: vcpus, val: 1
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: acpi, val: 1
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: usb, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: usbdevice, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:324) args: k, val: None
[2008-12-18 10:01:56 xend 3467] DEBUG (image:384) No VNC passwd configured for vfb access
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:1437) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x200.
[2008-12-18 10:01:56 xend 3467] DEBUG (balloon:127) Balloon: 542608 KiB free; need 541696; done.
[2008-12-18 10:01:56 xend 3467] INFO (image:137) buildDomain os=None dom=3 vcpus=1
[2008-12-18 10:01:56 xend 3467] DEBUG (image:269) domid		  = 3
[2008-12-18 10:01:56 xend 3467] DEBUG (image:270) image		  = /usr/lib/xen/boot/hvmloader
[2008-12-18 10:01:56 xend 3467] DEBUG (image:271) store_evtchn   = 2
[2008-12-18 10:01:56 xend 3467] DEBUG (image:272) memsize		= 512
[2008-12-18 10:01:56 xend 3467] DEBUG (image:273) vcpus		  = 1
[2008-12-18 10:01:56 xend 3467] DEBUG (image:274) pae			= 1
[2008-12-18 10:01:56 xend 3467] DEBUG (image:275) acpi		   = 1
[2008-12-18 10:01:56 xend 3467] DEBUG (image:276) apic		   = 1
[2008-12-18 10:01:56 xend 3467] DEBUG (blkif:24) exception looking up device number for hda: [Errno 2] No such file or directory: '/dev/hda'
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:110) DevController: writing {'backend-id': '0', 'virtual-device': '768', 'device-type': 'disk', 'state': '1', 'backend': '/local/domain/0/backend/vbd/3/768'} to /local/domain/3/device/vbd/768.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:112) DevController: writing {'domain': 'POSTGRES_1', 'frontend': '/local/domain/3/device/vbd/768', 'format': 'raw', 'dev': 'hda', 'state': '1', 'params': '/dev/grupavol/Vol2', 'mode': 'w', 'online': '1', 'frontend-id': '3', 'type': 'phy'} to /local/domain/0/backend/vbd/3/768.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:110) DevController: writing {'backend-id': '0', 'virtual-device': '5632', 'device-type': 'cdrom', 'state': '1', 'backend': '/local/domain/0/backend/vbd/3/5632'} to /local/domain/3/device/vbd/5632.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:112) DevController: writing {'domain': 'POSTGRES_1', 'frontend': '/local/domain/3/device/vbd/5632', 'format': 'raw', 'dev': 'hdc', 'state': '1', 'params': '', 'mode': 'r', 'online': '1', 'frontend-id': '3', 'type': ''} to /local/domain/0/backend/vbd/3/5632.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:110) DevController: writing {'backend-id': '0', 'mac': '00:16:3e:0a:5e:61', 'handle': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/3/0'} to /local/domain/3/device/vif/0.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:112) DevController: writing {'bridge': 'xenbr0', 'domain': 'POSTGRES_1', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/3/device/vif/0', 'mac': '00:16:3e:0a:5e:61', 'online': '1', 'frontend-id': '3'} to /local/domain/0/backend/vif/3/0.
[2008-12-18 10:01:56 xend 3467] INFO (image:428) spawning device models: /usr/lib/xen/bin/qemu-dm ['/usr/lib/xen/bin/qemu-dm', '-d', '3', '-m', '512', '-boot', 'c', '-serial', 'pty', '-vcpus', '1', '-acpi', '-domain-name', 'POSTGRES_1', '-net', 'nic,vlan=1,macaddr=00:16:3e:0a:5e:61,model=rtl8139', '-net', 'tap,vlan=1,bridge=xenbr0', '-vnc', '127.0.0.1:3', '-vncunused']
[2008-12-18 10:01:56 xend 3467] INFO (image:430) device model pid: 31706
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:756) Storing VM details: {'shadow_memory': '9', 'uuid': 'af73a3d0-052c-8c87-92eb-d8b55f8f8589', 'on_reboot': 'restart', 'start_time': '1229590916.54', 'on_poweroff': 'destroy', 'name': 'POSTGRES_1', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '512', 'on_crash': 'restart', 'image': '(hvm (kernel /usr/lib/xen/boot/hvmloader) (device_model /usr/lib/xen/bin/qemu-dm) (pae 1) (vcpus 1) (boot c) (serial pty) (vnc 1) (vncunused 1) (xauthority /root/.Xauthority) (acpi 1) (apic 1))', 'maxmem': '1024'}
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:791) Storing domain details: {'console/port': '3', 'name': 'POSTGRES_1', 'console/limit': '1048576', 'vm': '/vm/af73a3d0-052c-8c87-92eb-d8b55f8f8589', 'domid': '3', 'cpu/0/availability': 'online', 'memory/target': '524288', 'store/ring-ref': '131070', 'store/port': '2'}
[2008-12-18 10:01:56 xend.XendDomainInfo 3467] DEBUG (XendDomainInfo:989) XendDomainInfo.handleShutdownWatch
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices vif.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:149) Waiting for 0.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:476) hotplugStatusCallback /local/domain/0/backend/vif/3/0/hotplug-status.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:476) hotplugStatusCallback /local/domain/0/backend/vif/3/0/hotplug-status.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:490) hotplugStatusCallback 1.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices usb.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices vbd.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:149) Waiting for 768.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:476) hotplugStatusCallback /local/domain/0/backend/vbd/3/768/hotplug-status.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:476) hotplugStatusCallback /local/domain/0/backend/vbd/3/768/hotplug-status.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:490) hotplugStatusCallback 1.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:149) Waiting for 5632.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:476) hotplugStatusCallback /local/domain/0/backend/vbd/3/5632/hotplug-status.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:490) hotplugStatusCallback 1.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices irq.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices vkbd.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices vfb.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices pci.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices ioports.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices tap.
[2008-12-18 10:01:56 xend 3467] DEBUG (DevController:143) Waiting for devices vtpm.
[2008-12-18 10:01:56 xend 3467] INFO (XendDomain:380) Domain POSTGRES_1 (3) unpaused.

 

dmesg

 

Linux version 2.6.18-92.1.13.el5xen ([email protected]) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP We
d Sep 24 20:44:26 EDT 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000f57cb000 (usable)
3199MB HIGHMEM available.
727MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 1005515
 DMA zone: 186366 pages, LIFO batch:31
 HighMem zone: 819149 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP (v002 IBM								   ) @ 0x000fdfd0
ACPI: XSDT (v001 IBM	SERVALNT 0x00001000 IBM  0x45444f43) @ 0xbffce9c0
ACPI: FADT (v002 IBM	SERVALNT 0x00001000 IBM  0x45444f43) @ 0xbffce900
ACPI: MADT (v001 IBM	SERVALNT 0x00001000 IBM  0x45444f43) @ 0xbffce840
ACPI: SRAT (v001 IBM	SERVALNT 0x00001000 IBM  0x45444f43) @ 0xbffce700
ACPI: HPET (v001 IBM	SERVALNT 0x00001000 IBM  0x45444f43) @ 0xbffce6c0
ACPI: MCFG (v001 IBM	SERVALNT 0x00001000 IBM  0x45444f43) @ 0xbffce680
ACPI: DSDT (v002 IBM	SERVALNT 0x00001000 INTL 0x20041203) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists.  Total pages: 1005515
Kernel command line: ro root=/dev/sda2 rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c073c000 soft=c071c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2327.552 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture:	 64 megabytes
Kernel range: 0x00000000c34c2000 - 0x00000000c74c2000
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 3898300k/4022060k available (2099k kernel code, 114348k reserved, 870k data, 176k init, 3276596k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5821.19 BogoMIPS (lpj=11642396)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebd3f1 20000000 00000000 00000000 0004e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebd3f1 20000000 00000000 00000000 0004e3bd 00000000 00000001
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: After all inits, caps: bfebd3f1 20000000 00000000 00000940 0004e3bd 00000000 00000001
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU 1 irqstacks, hard=c073d000 soft=c071d000
CPU 2 irqstacks, hard=c073e000 soft=c071e000
CPU 3 irqstacks, hard=c073f000 soft=c071f000
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
Initializing CPU#3
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=11
checking if image is initramfs... it is
Freeing initrd memory: 6607k freed
Grant table initialized
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC2B._PRT]
ACPI: PCI Interrupt Link [LP00] (IRQs *3)
ACPI: PCI Interrupt Link [LP01] (IRQs *10)
ACPI: PCI Interrupt Link [LP02] (IRQs *11)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP04] (IRQs *3)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP06] (IRQs *11)
ACPI: PCI Interrupt Link [LP07] (IRQs *5)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:01: ioport range 0x520-0x53f has been reserved
pnp: 00:01: ioport range 0x540-0x547 has been reserved
pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
pnp: 00:08: ioport range 0xcac-0xcac has been reserved
pnp: 00:09: ioport range 0x400-0x43f has been reserved
PCI: Bridge: 0000:1b:00.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:1b:01.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:1a:00.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:1a:00.3
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
 IO window: 5000-5fff
 MEM window: c8000000-c9ffffff
 PREFETCH window: c7f00000-c7ffffff
PCI: Bridge: 0000:00:04.0
 IO window: 7000-ffff
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
 IO window: 6000-6fff
 MEM window: c6000000-c7efffff
 PREFETCH window: c2000000-c20fffff
PCI: Bridge: 0000:00:07.0
IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
 IO window: disabled.
 MEM window: cd000000-cfffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
 IO window: disabled.
 MEM window: cd000000-cfffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
 IO window: disabled.
 MEM window: ca000000-ccffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
 IO window: disabled.
 MEM window: ca000000-ccffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
 IO window: 3000-4fff
 MEM window: de000000-dfffffff
 PREFETCH window: d0000000-ddffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:1a:00.0 to 64
PCI: Setting latency timer of device 0000:1b:00.0 to 64
ACPI: PCI Interrupt 0000:1b:01.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:1b:01.0 to 64
PCI: Setting latency timer of device 0000:1a:00.3 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1228979069.952:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 20B65DCA289A0EEF
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
PCI: Setting latency timer of device 0000:1a:00.0 to 64
Allocate Port Service[0000:1a:00.0:pcie10]
PCI: Setting latency timer of device 0000:1b:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:1b:00.0:pcie20]
PCI: Setting latency timer of device 0000:1b:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:1b:01.0:pcie20]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 © Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 379k
SCSI subsystem initialized
QLogic Fibre Channel HBA Driver: 8.02.14.01
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 19
qla2xxx 0000:07:00.0: Found an ISP2432, irq 19, iobase 0xee016000
qla2xxx 0000:07:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:07:00.0 to 64
qla2xxx 0000:07:00.0: Configure NVRAM parameters...
qla2xxx 0000:07:00.0: Found mismatch in adapter port names.
qla2xxx 0000:07:00.0:		qla0 port name found in NVRAM -> 2100001b321ada0b
qla2xxx 0000:07:00.0:	   qla0 port name found on command line -> 2100001b321ad60a
qla2xxx 0000:07:00.0:	   Using port name from NVRAM.
qla2xxx 0000:07:00.0: Verifying loaded RISC code...
qla2xxx 0000:07:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:07:00.0: Allocated (1413 KB) for firmware dump...
qla2xxx 0000:07:00.0: Waiting for LIP to complete...
qla2xxx 0000:07:00.0: LIP reset occured (f7f7).
qla2xxx 0000:07:00.0: LOOP UP detected (1 Gbps).
qla2xxx 0000:07:00.0: Topology - (F_Port), Host Loop address 0x0
scsi0 : qla2xxx
qla2xxx 0000:07:00.0:
QLogic Fibre Channel HBA Driver: 8.02.14.01
 QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
 ISP2432: PCIe (2.5GT/s x4) @ 0000:07:00.0 hdma+, host#=0, fw=4.04.00 [iP] [84XX]
 Vendor: EMC	   Model: SYMMETRIX		 Rev: 5568
 Type:   Direct-Access					  ANSI SCSI revision: 02
qla2xxx 0000:07:00.0: scsi(0:0:1:0): Enabled tagged queuing, queue depth 32.
SCSI device sda: 1060147200 512-byte hdwr sectors (542795 MB)
sda: Write Protect is off
sda: Mode Sense: 83 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 1060147200 512-byte hdwr sectors (542795 MB)
sda: Write Protect is off
sda: Mode Sense: 83 00 00 08
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 0:0:1:0: Attached scsi disk sda
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002600
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00002a00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00002e00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Adaptec aacraid driver 1.1-5[2453]
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
AAC0: kernel 5.2-0[15411] Oct 11 2007
AAC0: monitor 5.2-0[15411]
AAC0: bios 5.2-0[15411]
AAC0: serial 403C689
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi1 : ServeRAID
usb 1-1: device not accepting address 2, error -71
usb 1-1: new low speed USB device using uhci_hcd and address 4
 Vendor: IBM-ESXS  Model: VSC7160		   Rev: 1.07
 Type:   Enclosure						  ANSI SCSI revision: 03
usb 1-1: configuration #1 chosen from 1 choice
input: ATEN UC-10KM V1.3.121 as /class/input/input0
input: USB HID v1.10 Keyboard [ATEN UC-10KM V1.3.121] on usb-0000:00:1d.0-1
input: ATEN UC-10KM V1.3.121 as /class/input/input1
input: USB HID v1.10 Mouse [ATEN UC-10KM V1.3.121] on usb-0000:00:1d.0-1
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: IBM IBM RSA2 as /class/input/input2
input: USB HID v1.10 Keyboard [iBM IBM RSA2] on usb-0000:00:1d.2-1
input: IBM IBM RSA2 as /class/input/input3
input: USB HID v1.10 Mouse [iBM IBM RSA2] on usb-0000:00:1d.2-1
hiddev96: USB HID v1.10 Device [iBM IBM RSA2] on usb-0000:00:1d.2-1
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 20 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 bmdma 0x480 irq 14
ata2: DUMMY
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 6 roles, 1658 types, 210 bools, 1 sens, 1024 cats
security:  61 classes, 57675 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1228979087.757:2): policy loaded auid=4294967295 ses=4294967295
EDAC MC: Ver: 2.0.1 Sep 24 2008
EDAC MC0: Giving out device to i5000_edac.c I5000: DEV 0000:00:10.0
ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 20 (level, low) -> IRQ 18
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
intel_rng: FWH not detected
input: PC Speaker as /class/input/input4
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 22
sd 0:0:1:0: Attached scsi generic sg0 type 0
scsi 1:3:0:0: Attached scsi generic sg1 type 13
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ce000000, IRQ 22, node addr 001a646acf3d
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 16
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ca000000, IRQ 16, node addr 001a646acf3f
floppy0: no floppy controllers found
lp: driver loaded but no devices found
audit(1228979096.809:3): avc:  denied  { search } for  pid=1698 comm="rhgb" name="/" dev=sda2 ino=2 scontext=system_u:system_r
:rhgb_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
audit(1228979097.685:4): avc:  denied  { getattr } for  pid=1700 comm="sh" path="/" dev=sda2 ino=2 scontext=system_u:system_r:
rhgb_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
audit(1228979097.689:5): avc:  denied  { search } for  pid=1700 comm="ifconfig" name="/" dev=sda2 ino=2 scontext=system_u:syst
em_r:ifconfig_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
audit(1228979097.693:6): avc:  denied  { read } for  pid=1702 comm="setfont" name="/" dev=sda2 ino=2 scontext=system_u:system_
r:rhgb_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
audit(1228979098.053:7): avc:  denied  { search } for  pid=1699 comm="rhgb" name="/" dev=sda2 ino=2 scontext=system_u:system_r
:rhgb_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-3, type ext3), uses xattr
Adding 4096564k swap on /dev/sda3.  Priority:-1 extents:1 across:4096564k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14-xen <[email protected]>
audit(1228979122.827:8): avc:  denied  { search } for  pid=2137 comm="microcode_ctl" name="/" dev=sda2 ino=2 scontext=system_u
:system_r:cpucontrol_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
audit(1228979123.803:9): avc:  denied  { search } for  pid=2206 comm="iptables-restor" name="/" dev=sda2 ino=2 scontext=system
_u:system_r:iptables_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
ip_tables: © 2000-2006 Netfilter Core Team
audit(1228979124.119:10): avc:  denied  { search } for  pid=2206 comm="iptables-restor" name="/" dev=sda2 ino=2 scontext=syste
m_u:system_r:iptables_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
audit(1228979125.103:11): avc:  denied  { search } for  pid=2309 comm="ip" name="/" dev=sda2 ino=2 scontext=system_u:system_r:
ifconfig_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
audit(1228979125.271:12): avc:  denied  { search } for  pid=2319 comm="arping" name="/" dev=sda2 ino=2 scontext=system_u:syste
m_r:netutils_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
audit(1228979129.887:13): avc:  denied  { search } for  pid=2446 comm="auditd" name="/" dev=sda2 ino=2 scontext=system_u:syste
m_r:auditd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
xenbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device vif0.0 entered promiscuous mode
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
bnx2: peth0 NIC Copper Link is Up, 100 Mbps full duplex
device peth0 entered promiscuous mode
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
tun: Universal TUN/TAP device driver, 1.6
tun: © 1999-2004 Max Krasnyansky <[email protected]>
device tap0 entered promiscuous mode
xenbr0: topology change detected, propagating
xenbr0: port 3(tap0) entering forwarding state
device vif1.0 entered promiscuous mode
device tap1 entered promiscuous mode
xenbr0: topology change detected, propagating
xenbr0: port 5(tap1) entering forwarding state
device vif2.0 entered promiscuous mode

 

messages

 

Dec 14 04:02:02 localhost syslogd 1.4.1: restart.
Dec 15 15:18:12 localhost restorecond: Will not restore a file with more than one hard link (/etc/resolv.conf) No such file or directory
Dec 17 12:02:28 localhost restorecond: Will not restore a file with more than one hard link (/etc/resolv.conf) No such file or directory
Dec 18 09:12:51 localhost kernel: kjournald starting.  Commit interval 5 seconds
Dec 18 09:12:51 localhost kernel: EXT3 FS on dm-4, internal journal
Dec 18 09:12:51 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 18 10:00:10 localhost kernel: xenbr0: port 5(tap1) entering disabled state
Dec 18 10:00:10 localhost kernel: device tap1 left promiscuous mode
Dec 18 10:00:10 localhost kernel: xenbr0: port 5(tap1) entering disabled state
Dec 18 10:01:48 localhost kernel: xenbr0: port 6(vif2.0) entering disabled state
Dec 18 10:01:48 localhost kernel: device vif2.0 left promiscuous mode
Dec 18 10:01:48 localhost kernel: xenbr0: port 6(vif2.0) entering disabled state
Dec 18 10:01:56 localhost kernel: device tap1 entered promiscuous mode
Dec 18 10:01:56 localhost kernel: xenbr0: topology change detected, propagating
Dec 18 10:01:56 localhost kernel: xenbr0: port 5(tap1) entering forwarding state
Dec 18 10:01:56 localhost kernel: device vif3.0 entered promiscuous mode

 

<><>><>><><><><><>><><><><><><><><><><><><><><><><><><><><><>

dom-u

messages

Dec 14 04:02:07 POSTGRES-1 syslogd 1.4.1: restart.
Dec 18 09:11:25 POSTGRES-1 kernel: Kernel logging (proc) stopped.
Dec 18 09:11:25 POSTGRES-1 kernel: Kernel log daemon terminating.
Dec 18 09:11:26 POSTGRES-1 exiting on signal 15
Dec 18 09:11:26 POSTGRES-1 syslogd 1.4.1: restart.
Dec 18 09:11:26 POSTGRES-1 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Dec 18 09:50:47 POSTGRES-1 kernel: hda: dma_timer_expiry: dma status == 0x21
Dec 18 09:50:57 POSTGRES-1 kernel: hda: DMA timeout error

 

Dom-0 posiada karte qlogic2460

sterowniki ze stronki qlogic system wykrywa jako sda nie ma dysków lokalnych wszystko jest na macierzy

IBM x3650 na intelu

[Gość _PaT]

Po chwili googlowania znalazłem następuje wskazówki. Posprawdzaj w podanej kolejności, przy czym 1 i 2 wykonaj koniecznie!

 

1) Dysk może być uszkodzony. Sprawdź komunikaty smart (możesz je wkleić, tylko pamiętaj o tagach [ code ]).

2) Czy Twoja dom-U widzi dysk jako hda? Powinien to być xvda, w ostateczności sda. Jeśli próbuje operować na urządzeniu, którego nie ma, to być może tu jest pogrzebany. Aczkolwiek nie powinno to powodować zawieszenia całej maszyny...

3) Może to być błąd sterownika w jądrze. Spróbuj zrobić update, bo jest już dostępna nowsza wersja.

4) Może to być błąd w sterowniku qlogic. Można wtedy spróbować inną wersję + jakieś starsze jądro.

 

Daj znać jak poszło. Powodzenia.

[krupek]

add1)

smartctl -a /dev/sda

smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: EMC      SYMMETRIX        Version: 5568
Serial number: 500371068031
Device type: disk
Local Time is: Fri Dec 19 10:41:15 2008 CET
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
write:         0        0         0         0          0          0.000           0
Device does not support Self Test logging

 

Niestety niewiele tego jest.

 

Ale właśnie przyszło mi do głowy że może to być problem sterownika bo nie zła jatka była podczas instalacji. Sterownik zainstalował się tylko na „normalnym” jądrze 2.6.18-53.el5 (musiałem nawet ram wyciągać podczas instalacji żeby nie było PAE, a i na RH 5.2 już nie działał). Jak już się zainstalowała karta FC dopiero doinstalowywałem jajo z xen-em. Uaktualnienie jaja nie wchodzi w grę bo nie będzie działał sterownik.

 

Jak ma ktoś jeszcze jakiś pomysł jak to jeszcze uratować to ...

 

[Gość _PaT]

Ale właśnie przyszło mi do głowy że może to być problem sterownika bo nie zła jatka była podczas instalacji. Sterownik zainstalował się tylko na „normalnym” jądrze 2.6.18-53.el5 (musiałem nawet ram wyciągać podczas instalacji żeby nie było PAE, a i na RH 5.2 już nie działał). Jak już się zainstalowała karta FC dopiero doinstalowywałem jajo z xen-em. Uaktualnienie jaja nie wchodzi w grę bo nie będzie działał sterownik.

To niepoważne... Sterownik dał się zainstalować tylko w innym środowisku, niż ma działać, a jest to dla mnie poważna przesłanka, do przeprowadzenia eksperymentów właśnie w tej materii.

[old]

Po chwili googlowania znalazłem następuje wskazówki. Posprawdzaj w podanej kolejności, przy czym 1 i 2 wykonaj koniecznie!

 

1) Dysk może być uszkodzony. Sprawdź komunikaty smart (możesz je wkleić, tylko pamiętaj o tagach [ code ]).

2) Czy Twoja dom-U widzi dysk jako hda? Powinien to być xvda, w ostateczności sda. Jeśli próbuje operować na urządzeniu, którego nie ma, to być może tu jest pogrzebany. Aczkolwiek nie powinno to powodować zawieszenia całej maszyny...

3) Może to być błąd sterownika w jądrze. Spróbuj zrobić update, bo jest już dostępna nowsza wersja.

4) Może to być błąd w sterowniku qlogic. Można wtedy spróbować inną wersję + jakieś starsze jądro.

 

Daj znać jak poszło. Powodzenia.

 

witam

 

zdecydowanie polecam pkt. 3 - miałem podobne problemy przy kopiowaniu dużych plików - kilkadziesiąt G - update pomógł wsio zaczęło działać stabilnie

 

old