Samba + Drukarka

[CoooL]

otorz problem mam nastepujacy: Kombinuje juz od dluzszego czasu, jak udostepnic drukarke lexmark z12 podlaczona do komputera z fc3 na windows 98. Czytajac roznego rodzaju opisy doszedlem do mometu w ktorym windows widzi drukarke. I wlasnie gdzies czytalem ze trzeba wtedy podmapowac port z (_linuxa_ → Linuksa) ORT i zainstalowac jako lokalna na zmapowanym porcie, jednak podczas proby drukowania dostaje komunikat o odmowie dostepu do drukarki.... Wklejam moj plik smb.conf

 

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options (perhaps too

# many!) most of which are not shown in this example

#

# Any line which starts with a ; (semi-colon) or a # (hash)

# is a comment and is ignored. In this example we will use a #

# for commentry and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command "testparm"

# to check that you have not made any basic syntactic errors.

#

#======================= Global Settings =====================================

[global]

 

# workgroup = NT-Domain-Name or Workgroup-Name

        workgroup = MSHOME

 

# server string is the equivalent of the NT Description field

        server string = Dom1

 

# This option is important for security. It allows you to restrict

# connections to machines which are on your local network. The

# following example restricts access to two C class networks and

# the "loopback" interface. For more examples of the syntax see

# the smb.conf man page

;  hosts allow = 192.168.1. 192.168.2. 127.

 

# if you want to automatically load your printer list rather

# than setting them up individually then you'll need this

        printcap name = cups

 

# It should not be necessary to spell out the print system type unless

# yours is non-standard. Currently supported print systems include:

# bsd, sysv, plp, lprng, aix, hpux, qnx

  printing = cups

 

# This option tells cups that the data has already been rasterized

        cups options = raw

 

# Uncomment this if you want a guest account, you must add this to /etc/passwd

# otherwise the user "nobody" is used

;  guest account = pcguest

 

# this tells Samba to use a separate log file for each machine

# that connects

        log file = /var/log/samba/%m.log

# all log information in one file

#  log file = /var/log/samba/smbd.log

 

# Put a capping on the size of the log files (in Kb).

        max log size = 50

 

# Security mode. Most people will want user level security. See

# security_level.txt for details.

        security = share

# Use password server option only with security = server

;  password server = <NT-Server-Name>

 

# Password Level allows matching of _n_ characters of the password for

# all combinations of upper and lower case.

;  password level = 8

;  username level = 8

 

# You may wish to use password encryption. Please read

# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.

# Do not enable this option unless you have read those documents

;  encrypt passwords = yes

;  smb passwd file = /etc/samba/smbpasswd

 

# The following are needed to allow password changing from Windows to

# update the Linux system password also.

# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.

# NOTE2: You do NOT need these to allow workstations to change only

#        the encrypted SMB passwords. They allow the Unix password

#        to be kept in sync with the SMB password.

;  unix password sync = Yes

;  passwd program = /usr/bin/passwd %u

;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

 

# Unix users can map to different SMB User names

;  username map = /etc/samba/smbusers

 

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

;  include = /etc/samba/smb.conf.%m

 

# Most people will find that this option gives better performance.

# See speed.txt and the manual pages for details

        socket options = TCP_NODELAY SO_SNDBUF=8192 SO_RCVBUF=8192

 

# Configure Samba to use multiple interfaces

# If you have multiple network interfaces then you must list them

# here. See the man page for details.

;  interfaces = 192.168.12.2/24 192.168.13.2/24

 

# Configure remote browse list synchronisation here

#  request announcement to, or browse list sync from:

#      a specific host or from / to a whole subnet (see below)

;  remote browse sync = 192.168.3.25 192.168.5.255

# Cause this host to announce itself to local subnets here

;  remote announce = 192.168.1.255 192.168.2.44

 

# Browser Control Options:

# set local master to no if you don't want Samba to become a master

# browser on your network. Otherwise the normal election rules apply

;  local master = no

 

# OS Level determines the precedence of this server in master browser

# elections. The default value should be reasonable

;  os level = 33

 

# Domain Master specifies Samba to be the Domain Master Browser. This

# allows Samba to collate browse lists between subnets. Don't use this

# if you already have a Windows NT domain controller doing this job

;  domain master = yes

 

# Preferred Master causes Samba to force a local browser election on startup

# and gives it a slightly higher chance of winning the election

;  preferred master = yes

 

# Enable this if you want Samba to be a domain logon server for

# Windows95 workstations.

;  domain logons = yes

 

# if you enable domain logons then you may want a per-machine or

# per user logon script

# run a specific logon batch file per workstation (machine)

;  logon script = %m.bat

# run a specific logon batch file per username

;  logon script = %U.bat

 

# Where to store roving profiles (only for Win95 and WinNT)

#        %L substitutes for this servers netbios name, %U is username

#        You must uncomment the [Profiles] share below

;  logon path = \\%L\Profiles\%U

 

# All NetBIOS names must be resolved to IP Addresses

# 'Name Resolve Order' allows the named resolution mechanism to be specified

# the default order is "host lmhosts wins bcast". "host" means use the unix

# system gethostbyname() function call that will use either /etc/hosts OR

# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf

# and the /etc/resolv.conf file. "host" therefore is system configuration

# dependant. This parameter is most often of use to prevent DNS lookups

# in order to resolve NetBIOS names to IP Addresses. Use with care!

# The example below excludes use of name resolution for machines that are NOT

# on the local network segment

# - OR - are not deliberately to be known via lmhosts or via WINS.

; name resolve order = wins lmhosts bcast

 

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server

;  wins support = yes

 

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

#      Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

;  wins server = w.x.y.z

 

# WINS Proxy - Tells Samba to answer name resolution queries on

# behalf of a non WINS capable client, for this to work there must be

# at least one  WINS Server on the network. The default is NO.

;  wins proxy = yes

 

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names

# via DNS nslookups. The built-in default for versions 1.9.17 is yes,

# this has been changed in version 1.9.18 to no.

        dns proxy = no

        idmap uid = 16777216-33554431

        idmap gid = 16777216-33554431

        restrict anonymous = no

        domain master = no

        preferred master = no

        netbios name = Dom1

        max protocol = NT

        ldap ssl = No

        server signing = Auto

        map to guest = Bad User

        guest ok = yes

 

[homes]

        comment = Home Directories

        browseable = no

        case sensitive = no

        guest only = yes

        msdfs proxy = no

        hosts allow = 192.168.0.2

 

# Un-comment the following and create the netlogon directory for Domain Logons

; [netlogon]

;  comment = Network Logon Service

;  path = /home/netlogon

;  guest ok = yes

;  writable = no

;  share modes = no

 

 

# Un-comment the following to provide a specific roving profile share

# the default is to use the user's home directory

;[Profiles]

;    path = /home/profiles

;    browseable = no

;    guest ok = yes

 

 

# NOTE: If you have a BSD-style print system there is no need to

# specifically define each individual printer

[printers]

        comment = All Printers

        path = /tmp

        browseable = no

# Set public = yes to allow user 'guest account' to print

        guest ok = yes

        printable = yes

        printer name = Lexmark

        writable = no

        create mode = 0700

 

[Lexmark]

        printable = yes

        printer name = Lexmark

        hosts allow = 192.168.0.2

        force user = nobody