Problem Z Dyskiem

[swiatex]

Otóż mam następujący problem

dziś zainstalowałem sobie akceleracje 3d(Ati Radeo 9200)

i zapisało mi loga w /var/spool/mail/root ostatni wpis wygląda następująco:

Date: Sat, 7 Oct 2006 17:48:00 +0200
From: root <[email protected]>
Message-Id: <[email protected]>
To: [email protected]
Subject: SMART error (CurrentPendingSector) detected on host: 11.34.16.10.gd.marton.net.pl

This email was generated by the smartd daemon running on:

   host name: 11.34.16.10.gd.marton.net.pl
  DNS domain: [Unknown]
  NIS domain: (none)

The following warning/error was logged by the smartd daemon:

Device: /dev/hda, 1 Currently unreadable (pending) sectors

For details see host's SYSLOG (default: /var/log/messages).

You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent.

z tego wyczytałem że wali mi się jeden z sektorów

smartctl -a /dev/hda pokazywał także jeden walnięty sektor

 

przeszedłem na windowsa i zaczołem skanować chcdsk dysk c(ntfs) i d(fat32)

 

po skanowaniu (znalazł jakąś piosenke i coś robił z tym sektorem)

wlazłem na fedorke i gdy wpisałem smartctl -a /dev/hda

wyskoczyło

[root@11 ~]# smartctl -a /dev/hda
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright © 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE family
Device Model:     WDC WD800JB-00ETA0
Serial Number:    WD-WCAHL5088215
Firmware Version: 77.07W77
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Oct  7 19:48:37 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                       was suspended by an interrupting command from host.
                                       Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                       without error or no self-test has ever
                                       been run.
Total time to complete Offline
data collection:                 (2361) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                       No Auto Offline data collection support.
                                       Suspend Offline collection upon new
                                       command.
                                       Offline surface scan supported.
                                       Self-test supported.
                                       Conveyance Self-test supported.
                                       Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                       power-saving mode.
                                       Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                       No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  37) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always       -       2
 3 Spin_Up_Time            0x0007   093   089   021    Pre-fail  Always       -       1875
 4 Start_Stop_Count        0x0032   097   097   040    Old_age   Always       -       3410
 5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
 9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       3958
10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3334
194 Temperature_Celsius     0x0022   098   253   000    Old_age   Always       -       45
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       14
200 Multi_Zone_Error_Rate   0x0009   200   085   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 2
       CR = Command Register [HEX]
       FR = Features Register [HEX]
       SC = Sector Count Register [HEX]
       SN = Sector Number Register [HEX]
       CL = Cylinder Low Register [HEX]
       CH = Cylinder High Register [HEX]
       DH = Device/Head Register [HEX]
       DC = Device Command Register [HEX]
       ER = Error register [HEX]
       ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 40 ae 89 e1 e3  Error:

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 00 00 c8 00 00 40 00 00      03:39:16.050  NOP [Abort queued commands]
 03 00 e1 00 00 29 89 00      03:39:16.050  CFA REQUEST EXTENDED ERROR CODE
 00 00 c8 00 00 40 00 00      03:39:16.050  NOP [Abort queued commands]
 00 00 c8 00 00 40 00 00      03:39:16.050  NOP [Abort queued commands]
 03 00 e1 00 00 e9 87 00      03:39:16.050  CFA REQUEST EXTENDED ERROR CODE

Error 1 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 80 ae 89 e1 e3  Error:

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 00 00 c8 00 00 80 00 00      03:39:14.800  NOP [Abort queued commands]
 03 00 e1 00 00 69 88 00      03:39:14.800  CFA REQUEST EXTENDED ERROR CODE
 00 00 c8 00 00 80 00 00      03:39:14.800  NOP [Abort queued commands]
 03 00 e1 00 00 e9 86 00      03:39:14.800  CFA REQUEST EXTENDED ERROR CODE
 00 00 c8 00 00 80 00 00      03:39:14.800  NOP [Abort queued commands]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

i pamiętam że ok 2 godziny temu aż tyle błędów nie było

 

macie jakieś rady?? czy od razu bach-up danych i nowy dysk??

Aha i jeszcze jedno transfer spadł o ok 15kb/s i komp troszke się muli-procesor ciągle chodzi na ok 40%

 

mój system to fc5 wpełni zaktualizowany

 

editt

dziś zauważyłem że co jakieś 30 s jest 10 sekunkowe grrrrrrrr lub coś takiego

 

PS.Czy nikt mi nie pomoże??

 

Oto wycinek z smartctl -a /dev/hda

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%       685         65112494
# 2  Short offline       Completed: read failure       90%       685         65112494
# 3  Extended offline    Completed: read failure       90%       684         65112494
# 4  Short offline       Completed: read failure       90%       684         65112494

czy to znaczy że nie kończy testu??

[uosiu]

prawdopodobnie po wykryciu badsectora dysk sie przelaczyl w tryb PIO co jest poprawne, gdyz procesor analizuje przechodzace dane do/z tego dysku