Kamera Internetowa

[Lukasz69]

Witam!

 

Mam kamere internetowa Creative Live Cam Vista IM. Poczytalem troche i probowalem uruchomic ja pod pingwinem (FC 6 jadro z dystrybucji 2.6.19-1.2895.fc6) jednak sie nie udalo. Moze ktos ma wskazowki?

 

lsmod pokazuje:

Module				  Size  Used by
usbserial			  46769  0
ibmcam				 55985  0
usbvideo			   38213  1 ibmcam
compat_ioctl32		 17473  1 usbvideo
gspca				 656464  0
videodev			   35777  2 usbvideo,gspca
v4l1_compat			20421  1 videodev
v4l2_common			33345  2 compat_ioctl32,videodev
sunrpc				196617  1
ipv6				  340161  16
cpufreq_ondemand	   18129  1
dm_mirror			  33217  0
dm_multipath		   30033  0
dm_mod				 77457  2 dm_mirror,dm_multipath
video				  28233  0
sbs					26897  0
i2c_ec				 14529  1 sbs
button				 16481  0
battery				20041  0
asus_acpi			  27749  0
ac					 14665  0
lp					 24081  0
snd_intel8x0		   46825  1
snd_ac97_codec		125849  1 snd_intel8x0
snd_ac97_bus		   11585  1 snd_ac97_codec
snd_seq_dummy		  12869  0
snd_seq_oss			45377  0
snd_seq_midi_event	 17473  1 snd_seq_oss
snd_seq				71905  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device		 17877  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss			57185  0
snd_mixer_oss		  26945  1 snd_pcm_oss
floppy				 75593  0
ide_cd				 51809  0
snd_pcm			   101449  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
nvidia			   7764440  22
sg					 47849  0
ohci1394			   46361  0
snd_timer			  35017  2 snd_seq,snd_pcm
snd					78697  11 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_m
ixer_oss,snd_pcm,snd_timer
cdrom				  45929  1 ide_cd
ieee1394			  376409  1 ohci1394
i2c_nforce2			17089  0
soundcore			  18145  1 snd
forcedeth			  55493  0
shpchp				 49417  0
k8_edac				26113  0
snd_page_alloc		 19665  2 snd_intel8x0,snd_pcm
pcspkr				 12225  0
k8temp				 15041  0
i2c_core			   34369  3 i2c_ec,nvidia,i2c_nforce2
hwmon				  12361  1 k8temp
parport_pc			 39785  1
edac_mc				36177  1 k8_edac
parport				52685  2 lp,parport_pc
serio_raw			  16709  0
sata_nv				22341  3
libata				126697  1 sata_nv
sd_mod				 31425  4
scsi_mod			  170777  3 sg,libata,sd_mod
ext3				  155473  2
jbd					77617  1 ext3
ehci_hcd			   43853  0
ohci_hcd			   32345  0
uhci_hcd			   35929  0

 

Myslalem ze brak usbcore jest przyczyna porazki jednak gdy daje dmsg to okazuje sie ze usbcore wykrywa to i owo (najwyrazniej wkompilowane jest na stale).

Pomimo zaladowanych modulow nie mam urzadzenia video0 w /dev.

[Daniello]

A sprawdzałeś czy się zainicjowało coś w dmesg ?

[Lukasz69]

dmesg wypluwa co nastepuje:

 

Linux version 2.6.19-1.2895.fc6 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 18:50:56 EST 2007
Command line: ro root=LABEL=/ quiet noapic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f6d90
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0
ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000003feeb180
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feeb3c0
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feeb0c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003fee0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003fee0000
Zone PFN ranges:
 DMA             0 ->     4096
 DMA32        4096 ->  1048576
 Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
   0:        0 ->      159
   0:      256 ->   261856
On node 0 totalpages: 261759
 DMA zone: 64 pages used for memmap
 DMA zone: 1446 pages reserved
 DMA zone: 2489 pages, LIFO batch:0
 DMA32 zone: 4027 pages used for memmap
 DMA32 zone: 253733 pages, LIFO batch:31
 Normal zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
I/O APIC #2 at 0xFEC00000.
Setting APIC routing to physical flat
Processors: 2
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 43264 bytes of per cpu data
Built 1 zonelists.  Total pages: 256222
Kernel command line: ro root=LABEL=/ quiet noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ 9022000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1021348k/1047424k available (2468k kernel code, 25688k reserved, 1934k data, 312k init)
Calibrating delay using timer specific routine.. 4021.81 BogoMIPS (lpj=2010907)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0828)
Using local APIC timer interrupts.
result 12564534
Detected 12.564 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
spurious 8259A interrupt: IRQ7.
Calibrating delay using timer specific routine.. 4024.23 BogoMIPS (lpj=2012119)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon 64 X2 Dual Core Processor 3800+ stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 476 cycles)
Brought up 2 CPUs
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2010.323 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=64 bytes
sizeof(inode)=720 bytes
sizeof(dentry)=224 bytes
sizeof(ext3inode)=968 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=240 bytes
sizeof(task_struct)=1904 bytes
migration_cost=282
checking if image is initramfs... it is
Freeing initrd memory: 1520k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 00:18
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
PCI-DMA: Disabling IOMMU.
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:09.0
 IO window: a000-afff
 MEM window: fdf00000-fdffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
 IO window: disabled.
 MEM window: disabled.
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
 IO window: 9000-9fff
 MEM window: fa000000-fcffffff
 PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1169486272.232:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 3990ACCD31A7D65A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 © Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
   ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
   ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: LITE-ON DVDRW SHM-165H6S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xc
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xe
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 312k freed
Write protecting the kernel read-only data: 493k
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 11, io mem 0xfe02f000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 10, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:07.0: version 2.0
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 11
scsi0 : sata_nv
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH pending after completion, repeating EH (cnt=4)
scsi1 : sata_nv
usb 1-4: new full speed USB device using ohci_hcd and address 2
usb 1-4: configuration #1 chosen from 1 choice
ata2: SATA link down (SStatus 0 SControl 300)
ata2: EH pending after completion, repeating EH (cnt=4)
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LFID] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 5
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 5
scsi2 : sata_nv
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 1
ata3.00: configured for UDMA/133
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: Attached scsi disk sda
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1169486277.368:2): selinux=0 auid=4294967295
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
EDAC MC: Ver: 2.0.1 Jan 10 2007
input: PC Speaker as /class/input/input2
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
ieee1394: Initialized config rom entry `ip1394'
sd 2:0:0:0: Attached scsi generic sg0 type 0
eth0: forcedeth.c: subsystem: 01043:812a bound to 0000:00:0a.0
nvidia: module license 'NVIDIA' taints kernel.
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  1.0-9746  Fri Dec 15 10:19:35 PST 2006
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 50630 usecs
intel8x0: clocking to 46886
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011060000004854]
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: [email protected]
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda7, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
eth0: no IPv6 routers present
Linux video capture interface: v2.00
usbcore: registered new interface driver gspca
/home/lukasz/Desktop/gspcav1-20070110/gspcav1-20070110/gspca_core.c: gspca driver 01.00.12 registered
usbcore: registered new interface driver ibmcam
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core

 

Zagladnalem do centrum informacyjnego i system w zakladce usb pisze dokladna nazwe kamerki jaka mam.

Natomiast lsusb daje:

Bus 001 Device 003: ID 041e:4052 Creative Technology, Ltd

Bus 001 Device 001: ID 0000:0000

Bus 002 Device 001: ID 0000:0000

 

Niby kamera jest a jej nie ma bo nie moge sie do niej dostac :/

[dg24]

A zainstalowałeś sterowniki do kamery?

Możesz je pobrać stąd: http://mxhaard.free.fr/spca5xx.html

Z tego co wiem to był problem z ich instalacją na jądrze dla procesora 586 z płyty instalacyjnej.

Zaktualizuj jądro (yum -y update kernel*) lub zainstaluj z płyty wersję 686 (musisz dopisać opcję -f dla rpm) .

Gdzieś w internecie jest również ropozytorium ze sterownikami do kamer (trafiłem na nie przypadkiem) ale niestety zgubiłem adres i nie mogę go ponownie wygooglować

 

PS: Vista nie ma najlepszej jakości obrazu- dla Linuksa polecam raczej Labtec Webcam Pro (około 80zł)

[Lukasz69]

Mam gspca - sciagnalem i zamontowalem i nic. Fedore mam 64 bit. System zaktualizowalem z 3 dni temu. Podobno Knoppix dobrze radzi sobie z kamerami - wlasnie go sciagam i zobacze czy on wykryje moja kamere - wtedy moze podgladne troche moduly lub inne rzeczy.

Co do kamerki to dostalem ja w prezencie - dla mnie jest w sam raz.

 

[(BigFan)!]

aby nie zakładać nowego tematu będę kontynuował tutaj...

 

Oczywiście u mnie sprawa tyczy się również Kamerki Net`owej.

 

Mam Sony Vaio VGN-FE28H z wbudowaną kamerką ... i nie za bardzo wiem skąd (_wziąść_ → wziąć) ORT sterowniki.

Jak sprawdzić co to za typ kamerki? Probowalem lspci i dmesg ale tam nic nie znalazlem...

 

[root@Linux ~]# uname -r

2.6.22.9-61.fc6

 

Czy w takiej sytuacji sterowniki naleza zainstalowac ndiswrapperem? (stery pod Winde mozna zassac ze stronki Sony)

Czy nie ma innej możliwości?

[w.tabin]

Witam!

 

Mam kamere internetowa Creative Live Cam Vista IM. Poczytalem troche i probowalem uruchomic ja pod pingwinem (FC 6 jadro z dystrybucji 2.6.19-1.2895.fc6) jednak sie nie udalo. Moze ktos ma wskazowki?

 

 

Myslalem ze brak usbcore jest przyczyna porazki jednak gdy daje dmsg to okazuje sie ze usbcore wykrywa to i owo (najwyrazniej wkompilowane jest na stale).

Pomimo zaladowanych modulow nie mam urzadzenia video0 w /dev.

 

zobacz tutaj i tutaj

EDIT

Jak zainstalować kamerkę internetową Creative Live Cam Vista IM:

1. doinstalowałem:

kernel-devel, kernel-headers, gcc, v4l2-tool

2. ściągnąłem źródła

3. rozpakowałem w katalogu domowym i w konsoli przeszedłem do tego katalogu jako user

$cd /home/katalog w którym rozpakowałem źródła

4. w tym katalogu wydajemy komendę

make

5. logujemy się na root i

# make install
# modprobe ov51x-jpeg

6. Sprawdzamy czy wszystko działa, jeżeli mamy mplayera to wydajemy komendę w konsoli jako user

mplayer tv:// -tv driver=v4l:width=352:height=288:device=/dev/video0

7. Jeżeli nie wyskoczyły żadne błędy to możemy cieszyć się kamerką internetową.

Pozdrawiam

[zybex_pl]

Mam Sony Vaio VGN-FE28H z wbudowaną kamerką ... i nie za bardzo wiem skąd (_wziąść_ → wziąć) ORT sterowniki.

Jak sprawdzić co to za typ kamerki? Probowalem lspci i dmesg ale tam nic nie znalazlem...

 

w coniektórych vajokach montowane są kamerki ricocha 1.3 mpix

podobnie jak w hp pavilonach - zobacz więc http://forum.fedora.pl/index.php?showtopic=16284

może się przydać

[corman]

Jak by ktoś, miał problemy z instalacją sterowników "ov51x..." z paczki to niech wpisze w konsoli:

rpm -ivh http://drpixel.tuxfamily.org/fedora/drpixe...-1-2.noarch.rpm , następnie:

yum install --enablerepo=drpixel kmod-ov51x-jpeg , a resztę j/w. Obraz z kamerki jest wyświetlany przez Mplayera, lecz Skype mimo iż w ustawieniach video widzi ją, to mimo tego w okienku testowym brak obrazu.

[w.tabin]

Jak by ktoś, miał problemy z instalacją sterowników "ov51x..." z paczki to niech wpisze w konsoli:

rpm -ivh http://drpixel.tuxfamily.org/fedora/drpixe...-1-2.noarch.rpm , następnie:

yum install --enablerepo=drpixel kmod-ov51x-jpeg , a resztę j/w. Obraz z kamerki jest wyświetlany przez Mplayera, lecz Skype mimo iż w ustawieniach video widzi ją, to mimo tego w okienku testowym brak obrazu.

 

Jeżeli wykonasz wszystko jak opisałem to nie będziesz miał problemu z kamerką. U mnie śmiga mplayer i skype.

Nie mam problemu z kamerką ani pod Fedorą 8, Fedorą 7, Archlinuksem czy Gentoo.

Do tego co napisałem wcześniej kilka postów wyżej: pomiędzy pkt 3 i 4 należy nałożyć patch zgodnie z opisem podanym w tym poście

Pozdrawiam