Dysk Bliski Konca

[daf]

witam,

 

zainspirowany tym watkiem postanowilem odpalic smartctl na swoim 4-letnim dysku w kompie stacjonarnym. zauwazylem, ze w moim przypadku VALUE zbliza sie do THRESH i to baaaardzo. dodatkowo, mam errory.

 

czy moglbym prosic kogos kto sie na tym zna o rzucenie okiem na moje wyniki? wolalbym miec chwilke na zgranie danych:)

 

smartctl version 5.37 [i386-redhat-linux-gnu] Copyright © 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST3120827AS
Serial Number:    3MS01AXM
Firmware Version: 3.42
User Capacity:    120,034,123,776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Wed Apr  2 23:02:23 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
				was completed without error.
				Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		 ( 430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				Offline surface scan supported.
				Self-test supported.
				No Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  71) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x000f   054   050   006    Pre-fail  Always       -       230667046
 3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
 4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1776
 5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       441208898
 9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       10141
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1768
194 Temperature_Celsius     0x0022   043   054   000    Old_age   Always       -       43 (Lifetime Min/Max 0/16)
195 Hardware_ECC_Recovered  0x001a   054   049   000    Old_age   Always       -       230667046
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   193   000    Old_age   Always       -       13
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 12 occurred at disk power-on lifetime: 3053 hours (127 days + 5 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 5b 0d 9f 02 ed  Error: ABRT at LBA = 0x0d029f0d = 218275597

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 20 00 00 68 9e 02 ed 00      05:08:52.880  READ SECTOR(S)
 20 00 00 68 9d 02 ed 00      05:08:52.875  READ SECTOR(S)
 20 00 00 68 9c 02 ed 00      05:08:52.836  READ SECTOR(S)
 20 00 78 68 44 9d ec 00      05:08:52.795  READ SECTOR(S)
 20 00 00 68 43 9d ec 00      05:08:52.780  READ SECTOR(S)

Error 11 occurred at disk power-on lifetime: 3052 hours (127 days + 4 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 15 aa b3 55 e0  Error: ABRT at LBA = 0x0055b3aa = 5616554

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 20 00 80 3f b3 55 e0 00      03:48:43.170  READ SECTOR(S)
 20 00 80 bf b2 55 e0 00      03:48:41.855  READ SECTOR(S)
 20 00 80 3f b2 55 e0 00      03:48:41.854  READ SECTOR(S)
 20 00 58 e7 b1 55 e0 00      03:48:41.849  READ SECTOR(S)
 20 00 28 5f 20 4d e0 00      03:48:37.542  READ SECTOR(S)

Error 10 occurred at disk power-on lifetime: 3048 hours (127 days + 0 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 70 5a 08 9e e1  Error: ABRT at LBA = 0x019e085a = 27134042

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 20 00 81 49 08 9e e1 00      00:19:53.814  READ SECTOR(S)
 30 00 80 97 cd 9d e1 00      00:19:53.808  WRITE SECTOR(S)
 20 00 08 c7 3b 00 e0 00      00:19:53.800  READ SECTOR(S)
 20 00 10 47 45 64 e2 00      00:19:53.779  READ SECTOR(S)
 20 00 08 6f 0c 34 e2 00      00:19:53.925  READ SECTOR(S)

Error 9 occurred at disk power-on lifetime: 3048 hours (127 days + 0 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 70 f8 ff ff ef  Error: ABRT at LBA = 0x0ffffff8 = 268435448

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c4 00 7f 28 46 2c ed 00      00:12:47.015  READ MULTIPLE
 c4 00 7f a9 45 2c ed 00      00:12:46.605  READ MULTIPLE
 c4 00 7f 2a 45 2c ed 00      00:12:46.099  READ MULTIPLE
 c4 00 73 b7 44 2c ed 00      00:12:45.900  READ MULTIPLE
 c4 00 7f 38 44 2c ed 00      00:12:45.867  READ MULTIPLE

Error 8 occurred at disk power-on lifetime: 3048 hours (127 days + 0 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 5f a9 44 6f e8  Error: ICRC, ABRT 95 sectors at LBA = 0x086f44a9 = 141509801

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 c8 00 80 88 44 6f e8 00      00:11:54.556  READ DMA
 c8 00 80 08 44 6f e8 00      00:11:54.554  READ DMA
 ca 00 10 ef 43 91 e1 00      00:11:54.553  WRITE DMA
 c8 00 80 88 43 6f e8 00      00:11:54.552  READ DMA
 c8 00 80 08 43 6f e8 00      00:11:54.551  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

zalaczam tez lspci

 

00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15)
04:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)

 

[daf]

(na zagranicznych forach jest 'bump' wiec 'wymyslilem' polski odpowiednik)

 

bum

 

 

czy nikt nie potrafi mi pomoc w tym temacie? bardzo prosze.