[Solved]Wvdial + Modem E3276 + Internet Z Plusa

[mateczek]

Ma ktoś doświadczenie jak ustawić połączenie z internetem dla wymienionej w temacie konfiguracji?? Na początek logi z dmesg

 

Rozłączam modem...................(to komentarz nie log )[ 9591.980056] usb 1-6: USB disconnect, device number 4[ 9591.980352] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1[ 9591.980388] option 1-6:1.0: device disconnected[ 9591.982317] cdc_ncm 1-6:1.1 wwan0: unregister 'cdc_ncm' usb-0000:00:10.3-6, Mobile Broadband Network Device[ 9593.758711] usbserial: USB Serial deregistering driver GSM modem (1-port)Ponowne podłączam modem do usb[ 9593.758807] usbcore: deregistering interface driver option[ 9593.951875] usbcore: registered new interface driver option[ 9593.952561] usbserial: USB Serial support registered for GSM modem (1-port)[ 9627.821029] usb 1-6: new high-speed USB device number 6 using ehci-pci[ 9627.960827] usb 1-6: New USB device found, idVendor=12d1, idProduct=14fe[ 9627.960837] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0[ 9627.960841] usb 1-6: Product: HUAWEI Mobile[ 9627.960845] usb 1-6: Manufacturer: HUAWEI Technology[ 9628.001523] scsi6 : usb-storage 1-6:1.0[ 9628.001959] scsi7 : usb-storage 1-6:1.1[ 9629.004721] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2[ 9629.005135] scsi 7:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2[ 9629.006329] sr2: scsi-1 drive[ 9629.006589] sr 6:0:0:0: Attached scsi CD-ROM sr2[ 9629.006856] sr 6:0:0:0: Attached scsi generic sg3 type 5[ 9629.007310] sd 7:0:0:0: Attached scsi generic sg4 type 0[ 9629.008958] sd 7:0:0:0: [sdb] Attached SCSI removable disk[ 9630.928880] ISO 9660 Extensions: Microsoft Joliet Level 1[ 9630.929406] ISOFS: changing to secondary root[ 9631.118362] usb 1-6: USB disconnect, device number 6[ 9631.447183] usb 1-6: new high-speed USB device number 7 using ehci-pci[ 9631.561960] usb 1-6: New USB device found, idVendor=12d1, idProduct=1506[ 9631.561970] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0[ 9631.561974] usb 1-6: Product: HUAWEI Mobile[ 9631.561977] usb 1-6: Manufacturer: HUAWEI Technology[ 9631.563982] option 1-6:1.0: GSM modem (1-port) converter detected[ 9631.564173] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0[ 9631.565960] usb 1-6: MAC-Address: 0c:5b:8f:27:9a:64[ 9631.566377] cdc_ncm 1-6:1.1 wwan0: register 'cdc_ncm' at usb-0000:00:10.3-6, Mobile Broadband Network Device, 0c:5b:8f:27:9a:64[ 9631.573044] scsi8 : usb-storage 1-6:1.2[ 9631.578051] scsi9 : usb-storage 1-6:1.3[ 9632.576859] scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2[ 9632.578598] sr2: scsi-1 drive[ 9632.578863] sr 8:0:0:0: Attached scsi CD-ROM sr2[ 9632.579120] sr 8:0:0:0: Attached scsi generic sg3 type 5[ 9632.580856] scsi 9:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2[ 9632.581425] sd 9:0:0:0: Attached scsi generic sg4 type 0[ 9632.583123] sd 9:0:0:0: [sdb] Attached SCSI removable disk[ 9634.943742] ISO 9660 Extensions: Microsoft Joliet Level 1[ 9634.944270] ISOFS: changing to secondary root 

Tworzy się interfejs  ttyUSB0 a mimo to NetworkManager nie widzi modemu. Sprubowałem z programem WVdia.

 

/etc/wvdial.conf

 

[Dialer Defaults]Modem = /dev/ttyUSB0Baud = 460800SetVolume = 0Dial Command = ATDTFlowControl = NOFLOWInit1 = ATZ[Dialer pin]Init2 = AT+CPIN=0318[Dialer ajplus]Username = plusgsmPassword = plusgsmPhone = *99***1#Stupid Mode = 1Init3 = AT+CGDCONT=1,"IP","www.plusgsm.pl"Dial Attempts = 3

i teraz gdy wpisuje w terminal

 

[root@localhost etc]# wvdial pin--> WvDial: Internet dialer version 1.61--> Initializing modem.--> Sending: ATZCATZOKG--> Sending: AT+CPIN=0318PAT+CPIN=0318^RSSI:18^LTERSRP:-108,-11OK^SRVST: 0--> Modem initialized.--> Configuration does not specify a valid phone number.--> Configuration does not specify a valid login name.--> Configuration does not specify a valid password.

kolejną komenę jaką wpisuje to

 

[root@localhost etc]# wvdial ajplus--> WvDial: Internet dialer version 1.61--> Initializing modem.--> Sending: ATZATZOK--> Sending: AT+CGDCONT=1,"IP","www.plusgsm.pl"AT+CGDCONT=1,"IP","www.plusgsm.pl"OK--> Modem initialized.--> Sending: ATDT*99***1#--> Waiting for carrier.ATDT*99***1#CONNECT--> Carrier detected.  Starting PPP immediately.--> Starting pppd at Fri Jun  7 09:58:09 2013--> Pid of pppd: 4323--> Using interface ppp0--> pppd: [18]�TA@�N `�N --> pppd: [18]�TA@�N `�N

Poczeka chwilę i pluje dalej

 

--> Disconnecting at Fri Jun  7 09:58:40 2013--> The PPP daemon has died: A modem hung up the phone (exit code = 16)--> man pppd explains pppd error codes in more detail.--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.--> Auto Reconnect will be attempted in 5 seconds--> Initializing modem.--> Sending: ATZ--> Sending: ATQ0--> Re-Sending: ATZ--> Modem not responding.--> Initializing modem.--> Sending: ATZ--> Sending: ATQ0--> Re-Sending: ATZ--> Modem not responding.--> Disconnecting at Fri Jun  7 09:59:01 2013 

Czy ktoś wie czego może mi brakować w konfiguracji??

Ps. Dioda modemu zmienia kolor z zielonego na niebieski (pojedyncze błyski co około 2s)

 

Pss. Zatrzymanie Network Managera komendami jak poniżej nic nie zmienia.

systemctl disable NetworkManager.servicesystemctl stop NetworkManager.service 

Kończył się okres testowy więc modem zwróciłem i tym samym problem z jego niedziałaniem się rozwiązał