Konfiguracja Bcm4311 Na Hp Dv2000

[Slomiszer]

Witam,

Mam problem ze znalezieniem domowej sieci Wifi,

Wiem że mój router działa bo po windowsem nie ma żadnego problemu z połączeniem. Moja karta sieciowa to broadcom BCM4311 (wg komendy lscpi)

po wpisaniu ifconfig widzę że karta nie pobiera adresu IP. próbowałem odinstalowanie i instalowanie network managera, sterowników, wire sharka, i radaru no i wpa_suplicanta. Póki co nie znalazłem rozwiązania ani na tym forum ani w googlach.

 

Czy ktoś może wie co moze byc przczyną że nie łącze się z siecią. fc14x64bit

 

z góry dzięki!!

[InIrudeBwoy]

Mam identyczna karte i dziala od kliku wersji wstecz. Musisz zaladowac firmware.

Zerknij czy po wpisaniu dmesg i przejrzeniu ostatnich 20 linijek(moze wiecej) nie jestes odsylany do strony linuxwireless.

Masz dwa rozwiazania albo isc do tej strony i postepowac wg. instrukcji lub spróbowac zainstalowac pakiet broadcom-wl który ma wlaczyc obsluge wifi.

[Slomiszer]

postanowiłem cię posłuchać i dzięki za radę!

sprawdziłem sterowniki już mam zainstalowane, na tej stronie którą mi podałeś było coś o nie włączającej się diodzie tak jak u mnie, nieststy nie wiem jak z tamtej porady skorzystać.

http://linuxwireless...Ds_do_not_work.

a po wpisaniu dmesg konsola zwróciła mi to (mam nadzieję że nie zaśmiecę forum)

 

 

[ 0.357273] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 22 23) *0, disabled.

[ 0.357523] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 22 23) *10

[ 0.357767] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15)

[ 0.358018] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.

[ 0.358266] ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled.

[ 0.358509] ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *11

[ 0.358751] ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10

[ 0.358994] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 22 23) *0, disabled.

[ 0.359248] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 22 23) *10

[ 0.359501] ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 22 23) *11

[ 0.359747] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 22 23) *11

[ 0.359992] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 22 23) *7

[ 0.360244] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 22 23) *11

[ 0.360497] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 22 23) *0, disabled.

[ 0.360750] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 22 23) *0, disabled.

[ 0.361009] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 22 23) *0, disabled.

[ 0.361258] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 22 23) *0, disabled.

[ 0.361516] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 22 23) *5

[ 0.361770] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 22 23) *0

[ 0.361831] HEST: Table is not found!

[ 0.361954] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.361975] vgaarb: loaded

[ 0.362125] SCSI subsystem initialized

[ 0.363041] libata version 3.00 loaded.

[ 0.363135] usbcore: registered new interface driver usbfs

[ 0.363161] usbcore: registered new interface driver hub

[ 0.363171] usbcore: registered new device driver usb

[ 0.363171] PCI: Using ACPI for IRQ routing

[ 0.363171] PCI: pci_cache_line_size set to 64 bytes

[ 0.363215] reserve RAM buffer: 000000000009dc00 - 000000000009ffff

[ 0.363220] reserve RAM buffer: 000000003bf00000 - 000000003bffffff

[ 0.363379] NetLabel: Initializing

[ 0.363382] NetLabel: domain hash size = 128

[ 0.363384] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.363404] NetLabel: unlabeled traffic allowed by default

[ 0.364068] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[ 0.364081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31

[ 0.364088] hpet0: 3 comparators, 32-bit 25.000000 MHz counter

[ 0.368060] Switching to clocksource hpet

[ 0.385737] pnp: PnP ACPI init

[ 0.385765] ACPI: bus type pnp registered

[ 0.435529] pnp: PnP ACPI: found 11 devices

[ 0.435534] ACPI: ACPI bus type pnp unregistered

[ 0.435555] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved

[ 0.435566] system 00:02: [io 0x1000-0x107f] has been reserved

[ 0.435570] system 00:02: [io 0x1080-0x10ff] has been reserved

[ 0.435575] system 00:02: [io 0x1400-0x147f] has been reserved

[ 0.435579] system 00:02: [io 0x1480-0x14ff] has been reserved

[ 0.435583] system 00:02: [io 0x1800-0x187f] has been reserved

[ 0.435587] system 00:02: [io 0x1880-0x18ff] has been reserved

[ 0.435591] system 00:02: [io 0x2000-0x203f] has been reserved

[ 0.435600] system 00:03: [io 0x0360-0x0361] has been reserved

[ 0.435605] system 00:03: [io 0x04d0-0x04d1] has been reserved

[ 0.443060] pci 0000:00:05.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]

[ 0.443067] pci 0000:00:02.0: PCI bridge to [bus 01-02]

[ 0.443071] pci 0000:00:02.0: bridge window [io disabled]

[ 0.443076] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb30fffff]

[ 0.443080] pci 0000:00:02.0: bridge window [mem pref disabled]

[ 0.443085] pci 0000:00:03.0: PCI bridge to [bus 03-04]

[ 0.443089] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]

[ 0.443094] pci 0000:00:03.0: bridge window [mem 0xb4000000-0xb7ffffff]

[ 0.443099] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]

[ 0.443105] pci 0000:00:10.0: PCI bridge to [bus 05-05]

[ 0.443108] pci 0000:00:10.0: bridge window [io disabled]

[ 0.443113] pci 0000:00:10.0: bridge window [mem 0xb8000000-0xb80fffff]

[ 0.443118] pci 0000:00:10.0: bridge window [mem pref disabled]

[ 0.443132] pci 0000:00:02.0: setting latency timer to 64

[ 0.443139] pci 0000:00:03.0: setting latency timer to 64

[ 0.443146] pci 0000:00:10.0: setting latency timer to 64

[ 0.443151] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]

[ 0.443155] pci_bus 0000:00: resource 5 [mem 0x40000000-0xfcffffffff]

[ 0.443159] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.443163] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb30fffff]

[ 0.443167] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]

[ 0.443171] pci_bus 0000:03: resource 1 [mem 0xb4000000-0xb7ffffff]

[ 0.443174] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]

[ 0.443179] pci_bus 0000:05: resource 1 [mem 0xb8000000-0xb80fffff]

[ 0.443183] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]

[ 0.443186] pci_bus 0000:05: resource 5 [mem 0x40000000-0xfcffffffff]

[ 0.443190] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.443233] NET: Registered protocol family 2

[ 0.443343] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)

[ 0.444107] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)

[ 0.445838] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.446595] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.446599] TCP reno registered

[ 0.446622] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.446645] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.446779] NET: Registered protocol family 1

[ 0.446809] pci 0000:00:00.0: Found disabled HT MSI Mapping

[ 0.446815] pci 0000:00:00.0: Enabling HT MSI Mapping

[ 0.446866] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.446894] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.446903] pci 0000:00:05.0: Boot video device

[ 0.660121] pci 0000:00:09.0: Found enabled HT MSI Mapping

[ 0.660179] pci 0000:00:09.0: Found enabled HT MSI Mapping

[ 0.660240] pci 0000:00:09.0: Found enabled HT MSI Mapping

[ 0.660279] PCI: CLS 64 bytes, default 64

[ 0.660372] Trying to unpack rootfs image as initramfs...

[ 1.158266] Freeing initrd memory: 12700k freed

[ 1.170449] Simple Boot Flag at 0x36 set to 0x1

[ 1.171166] audit: initializing netlink socket (disabled)

[ 1.171183] type=2000 audit(1289233849.170:1): initialized

[ 1.189668] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 1.192214] VFS: Disk quotas dquot_6.5.2

[ 1.192315] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 1.193062] msgmni has been set to 1859

[ 1.193167] SELinux: Registering netfilter hooks

[ 1.193839] alg: No test for stdrng (krng)

[ 1.193962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 1.193968] io scheduler noop registered

[ 1.193971] io scheduler deadline registered

[ 1.194049] io scheduler cfq registered (default)

[ 1.194383] pcieport 0000:00:02.0: setting latency timer to 64

[ 1.194405] alloc irq_desc for 40 on node 0

[ 1.194408] alloc kstat_irqs on node 0

[ 1.194420] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X

[ 1.194585] pcieport 0000:00:03.0: setting latency timer to 64

[ 1.194603] alloc irq_desc for 41 on node 0

[ 1.194606] alloc kstat_irqs on node 0

[ 1.194614] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X

[ 1.194757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 1.194796] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 1.194800] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 1.195239] acpiphp: Slot [1] registered

[ 1.195353] pci-stub: invalid id string ""

[ 1.197396] ACPI: AC Adapter [ADP1] (on-line)

[ 1.197530] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0

[ 1.199332] ACPI: Lid Switch [LID0]

[ 1.199424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1

[ 1.199431] ACPI: Sleep Button [sLPB]

[ 1.199522] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2

[ 1.199528] ACPI: Power Button [PWRB]

[ 1.199647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[ 1.199652] ACPI: Power Button [PWRF]

[ 1.200002] ACPI: acpi_idle registered with cpuidle

[ 1.200076] ACPI: processor limited to max C-state 1

[ 1.227158] thermal LNXTHERM:01: registered as thermal_zone0

[ 1.227170] ACPI: Thermal Zone [TZS0] (30 C)

[ 1.235137] thermal LNXTHERM:02: registered as thermal_zone1

[ 1.235148] ACPI: Thermal Zone [TZS1] (33 C)

[ 1.235170] ERST: Table is not found!

[ 1.235685] Non-volatile memory driver v1.3

[ 1.235690] Linux agpgart interface v0.103

[ 1.235799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 1.238504] brd: module loaded

[ 1.239576] loop: module loaded

[ 1.239974] Fixed MDIO Bus: probed

[ 1.240058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.240580] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23

[ 1.240589] alloc irq_desc for 23 on node 0

[ 1.240592] alloc kstat_irqs on node 0

[ 1.240607] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23

[ 1.240631] ehci_hcd 0000:00:0b.1: setting latency timer to 64

[ 1.240636] ehci_hcd 0000:00:0b.1: EHCI Host Controller

[ 1.240775] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1

[ 1.240811] ehci_hcd 0000:00:0b.1: debug port 1

[ 1.240822] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported

[ 1.240860] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000

[ 1.246043] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00

[ 1.246078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 1.246083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.246087] usb usb1: Product: EHCI Host Controller

[ 1.246090] usb usb1: Manufacturer: Linux 2.6.35.6-48.fc14.x86_64 ehci_hcd

[ 1.246093] usb usb1: SerialNumber: 0000:00:0b.1

[ 1.246267] hub 1-0:1.0: USB hub found

[ 1.246275] hub 1-0:1.0: 8 ports detected

[ 1.246437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.246966] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22

[ 1.246975] alloc irq_desc for 22 on node 0

[ 1.246978] alloc kstat_irqs on node 0

[ 1.246994] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22

[ 1.247055] ohci_hcd 0000:00:0b.0: setting latency timer to 64

[ 1.247060] ohci_hcd 0000:00:0b.0: OHCI Host Controller

[ 1.247179] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2

[ 1.247235] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000

[ 1.300084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 1.300089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.300092] usb usb2: Product: OHCI Host Controller

[ 1.300096] usb usb2: Manufacturer: Linux 2.6.35.6-48.fc14.x86_64 ohci_hcd

[ 1.300099] usb usb2: SerialNumber: 0000:00:0b.0

[ 1.300259] hub 2-0:1.0: USB hub found

[ 1.300270] hub 2-0:1.0: 8 ports detected

[ 1.300419] uhci_hcd: USB Universal Host Controller Interface driver

[ 1.300534] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 1.301042] i8042.c: Detected active multiplexing controller, rev 1.1.

[ 1.301162] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.301172] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[ 1.301177] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[ 1.301182] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[ 1.301187] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[ 1.301314] mice: PS/2 mouse device common for all mice

[ 1.301653] rtc_cmos 00:06: RTC can wake from S4

[ 1.301828] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0

[ 1.301873] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs

[ 1.302000] device-mapper: uevent: version 1.0.3

[ 1.302261] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: [email protected]

[ 1.302427] cpuidle: using governor ladder

[ 1.302430] cpuidle: using governor menu

[ 1.302927] usbcore: registered new interface driver hiddev

[ 1.302951] usbcore: registered new interface driver usbhid

[ 1.302954] usbhid: USB HID core driver

[ 1.302993] nf_conntrack version 0.5.0 (7437 buckets, 29748 max)

[ 1.303194] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

[ 1.303198] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

[ 1.303201] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

[ 1.303347] ip_tables: ^ 2000-2006 Netfilter Core Team

[ 1.303367] TCP cubic registered

[ 1.303370] Initializing XFRM netlink socket

[ 1.303386] NET: Registered protocol family 17

[ 1.303592] PM: Resume from disk failed.

[ 1.303613] registered taskstats version 1

[ 1.303955] Magic number: 2:805:539

[ 1.304103] rtc_cmos 00:06: setting system clock to 2010-11-08 16:30:50 UTC (1289233850)

[ 1.304164] Initalizing network drop monitor service

[ 1.304203] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[ 1.329268] ACPI: Battery Slot [bAT0] (battery present)

[ 1.329350] Freeing unused kernel memory: 944k freed

[ 1.330034] Write protecting the kernel read-only data: 10240k

[ 1.330468] Freeing unused kernel memory: 1576k freed

[ 1.331915] Freeing unused kernel memory: 1836k freed

[ 1.359947] dracut: dracut-006-3.fc14

[ 1.370896] dracut: rd_NO_LUKS: removing cryptoluks activation

[ 1.372917] dracut: rd_NO_LVM: removing LVM activation

[ 1.385851] udev[109]: starting version 161

[ 1.478483] dracut: Starting plymouth daemon

[ 1.505371] dracut: rd_NO_DM: removing DM RAID activation

[ 1.510981] dracut: rd_NO_MD: removing MD RAID activation

[ 1.650067] usb 1-8: new high speed USB device using ehci_hcd and address 3

[ 1.680175] pata_amd 0000:00:0d.0: version 0.4.1

[ 1.680242] pata_amd 0000:00:0d.0: setting latency timer to 64

[ 1.697087] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function

[ 1.729452] scsi0 : pata_amd

[ 1.746653] acpi device:01: registered as cooling_device2

[ 1.746889] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5

[ 1.746976] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

[ 1.762345] scsi1 : pata_amd

[ 1.763461] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14

[ 1.763467] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15

[ 1.764193] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18

[ 1.764201] alloc irq_desc for 18 on node 0

[ 1.764204] alloc kstat_irqs on node 0

[ 1.764220] firewire_ohci 0000:05:09.0: PCI INT A -> Link[LNK1] -> GSI 18 (level, high) -> IRQ 18

[ 1.774404] usb 1-8: New USB device found, idVendor=0c45, idProduct=62c0

[ 1.774410] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3

[ 1.774415] usb 1-8: Product: USB 2.0 Camera

[ 1.774418] usb 1-8: Manufacturer: Sonix Technology Co., Ltd.

[ 1.774421] usb 1-8: SerialNumber: SN0001

[ 1.800492] sata_nv 0000:00:0e.0: version 3.5

[ 1.800510] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)

[ 1.801066] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 17

[ 1.801074] alloc irq_desc for 17 on node 0

[ 1.801077] alloc kstat_irqs on node 0

[ 1.801093] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 17 (level, high) -> IRQ 17

[ 1.801097] sata_nv 0000:00:0e.0: Using SWNCQ mode

[ 1.801167] sata_nv 0000:00:0e.0: setting latency timer to 64

[ 1.807855] scsi2 : sata_nv

[ 1.808055] scsi3 : sata_nv

[ 1.808343] ata3: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 17

[ 1.808348] ata4: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 17

[ 1.835039] firewire_ohci: Added fw-ohci device 0000:05:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0

[ 1.872385] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0

[ 1.902364] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6

[ 2.038041] usb 2-5: new full speed USB device using ohci_hcd and address 2

[ 2.095377] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2

[ 2.095410] ata2: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11)

[ 2.117308] ata2.00: configured for MWDMA2

[ 2.123241] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5

[ 2.127265] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray

[ 2.127272] Uniform CD-ROM driver Revision: 3.20

[ 2.127464] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 2.127585] sr 1:0:0:0: Attached scsi generic sg0 type 5

[ 2.226080] usb 2-5: New USB device found, idVendor=09da, idProduct=054f

[ 2.226086] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.226091] usb 2-5: Product: USB Device

[ 2.226094] usb 2-5: Manufacturer: A4TECH

[ 2.235801] input: A4TECH USB Device as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input7

[ 2.236199] generic-usb 0003:09DA:054F.0001: input,hiddev96,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:0b.0-5/input0

[ 2.241515] input: A4TECH USB Device as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/input/input8

[ 2.241706] generic-usb 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:0b.0-5/input1

[ 2.262062] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.265239] ata3.00: ATA-8: TOSHIBA MK1246GSX, LB214C, max UDMA/100

[ 2.265245] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 2.268246] ata3.00: configured for UDMA/100

[ 2.268459] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1246GS LB21 PQ: 0 ANSI: 5

[ 2.268724] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)

[ 2.268772] sd 2:0:0:0: Attached scsi generic sg1 type 0

[ 2.268814] sd 2:0:0:0: [sda] Write Protect is off

[ 2.268818] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.268886] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.269273] sda: sda1 sda2 sda3 sda4 < sda5

[ 2.334179] firewire_core: created device fw0: GUID 06e40a0070b95044, S400

[ 2.347981] sda6 >

[ 2.348685] sd 2:0:0:0: [sda] Attached SCSI disk

[ 2.571047] ata4: SATA link down (SStatus 0 SControl 300)

[ 2.578482] sdhci: Secure Digital Host Controller Interface driver

[ 2.578487] sdhci: Copyright^ Pierre Ossman

[ 2.587043] sdhci-pci 0000:05:09.1: SDHCI controller found [1180:0822] (rev 19)

[ 2.587559] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 16

[ 2.587567] alloc irq_desc for 16 on node 0

[ 2.587570] alloc kstat_irqs on node 0

[ 2.587585] sdhci-pci 0000:05:09.1: PCI INT B -> Link[LNK2] -> GSI 16 (level, high) -> IRQ 16

[ 2.588641] sdhci-pci 0000:05:09.1: Will use DMA mode even though HW doesn't fully claim to support it.

[ 2.592046] Registered led device: mmc0::

[ 2.593157] mmc0: SDHCI controller on PCI [0000:05:09.1] using DMA

[ 2.701039] mmc0: new MMC card at address 0001

[ 2.706554] mmcblk0: mmc0:0001 16M 15.3 MiB

[ 2.706666] mmcblk0: p1

[ 3.345276] CE: hpet increased min_delta_ns to 7500 nsec

[ 3.454706] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

[ 3.488993] dracut: Mounted root filesystem /dev/sda3

[ 3.611466] dracut: Loading SELinux policy

[ 3.953823] type=1404 audit(1289233853.149:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[ 4.164166] SELinux: 2048 avtab hash slots, 205382 rules.

[ 4.251952] SELinux: 2048 avtab hash slots, 205382 rules.

[ 4.908361] SELinux: 9 users, 14 roles, 3435 types, 179 bools, 1 sens, 1024 cats

[ 4.908368] SELinux: 77 classes, 205382 rules

[ 4.915343] SELinux: Completing initialization.

[ 4.915347] SELinux: Setting up existing superblocks.

[ 4.915362] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[ 4.915374] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

[ 4.916188] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts

[ 4.916201] SELinux: initialized (dev proc, type proc), uses genfs_contexts

[ 4.916218] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 4.916239] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs

[ 4.917961] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

[ 4.917974] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

[ 4.920198] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

[ 4.920214] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts

[ 4.920224] SELinux: initialized (dev devpts, type devpts), uses transition SIDs

[ 4.920270] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs

[ 4.920281] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

[ 4.920299] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

[ 4.920339] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts

[ 4.920350] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[ 4.921424] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 4.921448] SELinux: initialized (dev sda3, type ext4), uses xattr

[ 4.926208] type=1403 audit(1289233854.121:3): policy loaded auid=4294967295 ses=4294967295

[ 6.206151] dracut: Switching root

[ 7.326946] readahead-collector: starting

[ 9.173649] udev[485]: starting version 161

[ 10.105306] lib80211: common routines for IEEE802.11 drivers

[ 10.105312] lib80211_crypt: registered algorithm 'NULL'

[ 10.270382] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[ 10.272041] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23

[ 10.272049] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, high) -> IRQ 23

[ 10.272058] forcedeth 0000:00:14.0: setting latency timer to 64

[ 10.272131] nv_probe: set workaround bit for reversed mac addr

[ 10.681886] EDAC MC: Ver: 2.1.0 Oct 22 2010

[ 10.703179] microcode: microcode: CPU0: AMD CPU family 0xf not supported

[ 10.703192] microcode: microcode: CPU1: AMD CPU family 0xf not supported

[ 10.703312] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba

[ 10.764905] ACPI: WMI: Mapper loaded

[ 10.786430] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:d3:13:db:f2

[ 10.786436] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3

[ 10.801265] i2c i2c-0: nForce2 SMBus adapter at 0x3040

[ 10.801569] i2c i2c-1: nForce2 SMBus adapter at 0x3000

[ 10.817537] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141

[ 10.877729] EDAC amd64_edac: Ver: 3.3.0 Oct 22 2010

[ 10.878116] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).

[ 10.878127] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.

[ 10.878130] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.

[ 10.878132] (Note that use of the override may cause unknown side effects.)

[ 10.878158] amd64_edac: probe of 0000:00:18.2 failed with error -22

[ 10.949355] wl: module license 'MIXED/Proprietary' taints kernel.

[ 10.949361] Disabling lock debugging due to kernel taint

[ 10.961091] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19

[ 10.961101] alloc irq_desc for 19 on node 0

[ 10.961104] alloc kstat_irqs on node 0

[ 10.961121] wl 0000:01:00.0: PCI INT A -> Link[LK2E] -> GSI 19 (level, high) -> IRQ 19

[ 10.961130] wl 0000:01:00.0: setting latency timer to 64

[ 11.115144] Linux video capture interface: v2.00

[ 11.245675] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)

[ 11.248639] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:0b.1/usb1/1-8/1-8:1.0/input/input9

[ 11.249598] usbcore: registered new interface driver uvcvideo

[ 11.249602] USB Video Class driver (v0.1.0)

[ 11.272541] lib80211_crypt: registered algorithm 'TKIP'

[ 11.277474] eth1: Broadcom BCM4311 802.11 Hybrid Wireless Controller 5.60.48.36

[ 11.833430] input: HP WMI hotkeys as /devices/virtual/input/input10

[ 11.855616] r852 0000:05:09.3: PCI INT B -> Link[LNK2] -> GSI 16 (level, high) -> IRQ 16

[ 11.855626] r852 0000:05:09.3: setting latency timer to 64

[ 11.855716] r852: Non dma capable device detected, dma disabled

[ 11.855742] r852: driver loaded succesfully

[ 12.768328] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22

[ 12.768337] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, high) -> IRQ 22

[ 12.768343] hda_intel: Disable MSI for Nvidia chipset

[ 12.768395] HDA Intel 0000:00:10.1: setting latency timer to 64

[ 15.741183] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 21

[ 15.741193] alloc irq_desc for 21 on node 0

[ 15.741196] alloc kstat_irqs on node 0

[ 15.741214] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 21 (level, high) -> IRQ 21

[ 15.741225] nvidia 0000:00:05.0: setting latency timer to 64

[ 15.741232] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem

[ 15.741630] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 Fri Oct 8 11:17:08 PDT 2010

[ 18.314407] EXT4-fs (sda3): re-mounted. Opts: (null)

[ 19.718851] EXT3-fs: barriers not enabled

[ 19.735700] kjournald starting. Commit interval 5 seconds

[ 19.735963] EXT3-fs (sda5): using internal journal

[ 19.735970] EXT3-fs (sda5): mounted filesystem with ordered data mode

[ 19.751833] SELinux: initialized (dev sda5, type ext3), uses xattr

[ 20.031920] fuse init (API version 7.14)

[ 20.058420] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts

[ 20.270546] SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts

[ 20.529593] SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts

[ 23.837650] Adding 1022972k swap on /dev/sda6. Priority:-1 extents:1 across:1022972k

[ 23.845363] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

[ 24.239202] readahead-disable-service: delaying service auditd

[ 27.506102] NET: Registered protocol family 10

[ 27.506487] lo: Disabled Privacy Extensions

[ 27.520995] ip6_tables: ^ 2000-2006 Netfilter Core Team

[ 32.474088] powernow-k8: Found 1 AMD Turion™ 64 X2 (2 cpu cores) (version 2.20.00)

[ 32.474315] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12

[ 32.474319] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e

[ 33.001294] Clocksource tsc unstable (delta = -100019603 ns)

[ 47.333379] eth0: no IPv6 routers present

[ 54.656552] readahead-collector: starting delayed service auditd

[ 55.446262] readahead-collector: sorting

[ 57.846481] readahead-collector: finished

[ 65.682289] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[ 83.087700] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts

[ 84.789126] UDF-fs: Partition marked readonly; forcing readonly mount

[ 84.832818] UDF-fs INFO UDF: Mounting volume 'FM2010', timestamp 2009/10/07 13:24 (103c)

[ 84.834748] SELinux: initialized (dev sr0, type udf), uses genfs_contexts

 

 

w dalszym ciągu nie mam wifi i nie wiem jak je uruchomić, niby mam mozliwość włączenia w networkmanagerze a jednak z siecia sie nie łączy :/

prosze o kolejne porady.

[InIrudeBwoy]

Coś mi nie pasuje ten dmesg.

Pokaż co wypluwa "iwconfig" i spróbuj "iwlist wlan0 scan" lub "iwlist eth1 scan".

Powinieneś zobaczyć listę interfejsów w pierwszym przypadku a następne polecenia powiedzą czy karta ma możliwość skanowania w poszukiwaniu AP. Jeśli coś się nie powiedzie to ja radzę usunąć broadcom-wl i zrobić jak piszą tutaj. Szczere mówiąc to mi się nie udało uruchomić karty przy użyciu paczki broadcom-wl.

[Slomiszer]

Oto co pokazuje po poleceniu. "iwconfig"

 

[ws03@ws03f14 ~]$ iwconfig

lo no wireless extensions.

 

eth0 no wireless extensions.

 

wlan0 IEEE 802.11bg ESSID:off/any

Mode:Managed Access Point: Not-Associated Tx-Power=off

Retry long limit:7 RTS thr:off Fragment thr:off

Power Management:off

 

 

a na dwa pozostale polecenia pokazuje:

 

iwlist eth1 scan

eth1 Interface doesn't support scanning.

iwlist wlan0 scan

wlan0 Failed to read scan data : Network is down

 

Witam powracam do tematu, mam swiezy system i zainstalowane stery broadcom-wl. To co sie zmienilo jest pogrubiona czcionka, ale i tak mojej sieci nie widzi?

pls HELP!

Edytowane Kwiecień 17, 2011 przez Slomiszer

[InIrudeBwoy]

No to yum remove broadcom-wl i jazda wg. przepisu http://linuxwireless.org/en/users/Drivers/b43#Fedora

[Slomiszer]

Dzięki za radę ale, niestety dalej nie działa.

 

"I tak powiem"

podejrzewam że zainstalowałem już tyle sterowników korzystając z tylu porad że szkoda gadać, czy jest możliwe wylistowanie wszystkich sterowników i ich deinstalacja żeby móc spróbować od nowa?

Czy może jedynym pewnym sposobem jest reinstalka?

[InIrudeBwoy]

Po pierwsze nie pisz dwóch postów, możesz edytować i dopisywać.

Po drugie nie poddawaj się.

Wklej tutaj wyniki następujących poleceń. Trochę ich dużo ale muszę się dobrze rozeznać w systemie.

 

dmesg | grep b43

dmesg | grep wlan0

dmesg | grep eth

iwconfig

ifconfig

lspci | grep Broadcom

lsmod | grep b43

cat /etc/modprobe.d/blacklist.conf

[Slomiszer]

Z tymi postami to racja sorki,

Polecenia i ich wyniki znajdują sie poniżej.

 

dmesg | grep eth od tej zaczynam bo poprzednie nie zwróciły niczego.

 

[root@ws03f14 ws03]# dmesg | grep eth

[   14.708236] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[   14.708774] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, high) -> IRQ 23

[   14.708781] forcedeth 0000:00:14.0: setting latency timer to 64

[   15.221425] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:d3:13:db:f2

[   15.221432] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3

[   16.329478] eth1: Broadcom BCM4311 802.11 Hybrid Wireless Controller 5.60.48.36

[  236.746038] eth0: no IPv6 routers present

[  297.999824] eth0: link down.

[  307.590201] eth0: link up.

[  308.335753] eth0: link down.

[  311.849996] eth0: link up.

 

 

iwconfig

 

[root@ws03f14 ws03]# iwconfig

lo        no wireless extensions.

 

eth0      no wireless extensions.

 

eth1      IEEE 802.11bg  ESSID:""  Nickname:""

          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated  

          Bit Rate:54 Mb/s   Tx-Power:24 dBm  

          Retry min limit:7   RTS thr:off   Fragment thr:off

          Encryption key:off

          Power Managementmode:All packets received

          Link Quality=5/5  Signal level=0 dBm  Noise level=0 dBm

          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0

          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

 

 

 

ifconfig

 

ifconfig

eth0      Link encap:Ethernet  HWaddr 00:16:D3:13:DB:F2  

          inet addr:192.168.0.101  Bcast:192.168.0.255  Mask:255.255.255.0

          inet6 addr: fe80::216:d3ff:fe13:dbf2/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:983 errors:0 dropped:0 overruns:0 frame:0

          TX packets:1030 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:647203 (632.0 KiB)  TX bytes:152080 (148.5 KiB)

          Interrupt:23 Base address:0xe000

 

lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          inet6 addr: ::1/128 Scope:Host

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:11 errors:0 dropped:0 overruns:0 frame:0

          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0

          RX bytes:766 (766.0   TX bytes:766 (766.0

 

 

 

lspci | grep Broadcom

 

01:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)

 

lsmod | grep b43 - brak zwróconej wartości

 

cat /etc/modprobe.d/blacklist.conf

 

[root@ws03f14 ws03]# cat /etc/modprobe.d/blacklist.conf

#

# Listing a module here prevents the hotplug scripts from loading it.

# Usually that'd be so that some other driver will bind it instead,

# no matter which driver happens to get probed first.  Sometimes user

# mode tools can also control driver binding.

#

# Syntax: see modprobe.conf(5).

#

 

# watchdog drivers

blacklist i8xx_tco

 

# framebuffer drivers

blacklist aty128fb

blacklist atyfb

blacklist radeonfb

blacklist i810fb

blacklist cirrusfb

blacklist intelfb

blacklist kyrofb

blacklist i2c-matroxfb

blacklist hgafb

blacklist nvidiafb

blacklist rivafb

blacklist savagefb

blacklist sstfb

blacklist neofb

blacklist tridentfb

blacklist tdfxfb

blacklist virgefb

blacklist vga16fb

blacklist viafb

 

# ISDN - see bugs 154799, 159068

blacklist hisax

blacklist hisax_fcpcipnp

 

# sound drivers

blacklist snd-pcsp

 

# I/O dynamic configuration support for s390x (bz #563228)

blacklist chsc_sch

blacklist ndiswrapper

 

 

Dzięki "InIrudeBwoy" Gdyby nie ty to już dawno była by reinstalka, a kto wie może i ubuntu :/

Edytowane Listopad 10, 2010 przez WalDo
Usunąłem zduplikowany spojlerek z dmesg

[InIrudeBwoy]

Coś jest nie tak ewidentnie. DMESG nie pokazuje nic poza jedną linijką "eth1: Broadcom BCM4311 802.11 Hybrid Wireless Controller 5.60.48.36".

Przepraszam ale popełniłem błąd, podrzuć jeszcze

lspci -vnn | grep 14e4

. Biorę to prosto ze strony linuxwireless. Oraz

lsmod

 

Skoro przerobiłeś instrukcje z powyższej strony to w katalogu /lib/firmware/b43 powinieneś mieć trochę plików a pakiet broadcom-wl powinien zniknąć.

Spróbuj ręcznie załadowac moduł b43, jako root, i pokaż wynik jeśli jakikolwiek będzie.

modprobe b43

[Slomiszer]

Witam,

Poniżej to co zwróciła mi konsola bez dzielenia na komendy.

Dzięki za pomoc!!

 

[root@ws03f14 ws03]# lspci -vnn | grep 14e4

01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)

[root@ws03f14 ws03]# lsmod

Module Size Used by

nls_utf8 1421 1

vfat 8579 1

udf 70916 1

fat 45956 1 vfat

cpufreq_ondemand 9278 1

powernow_k8 16374 1

freq_table 3955 2 cpufreq_ondemand,powernow_k8

mperf 1481 1 powernow_k8

ip6t_REJECT 4279 2

nf_conntrack_ipv6 18078 2

ip6table_filter 1687 1

ip6_tables 17481 1 ip6table_filter

ipv6 286249 16 ip6t_REJECT,nf_conntrack_ipv6

fuse 61363 7

uinput 7368 0

nvidia 10213047 40

snd_hda_codec_conexant 41923 1

lib80211_crypt_tkip 7987 0

snd_hda_intel 24399 2

wl 1961114 0

snd_hda_codec 86743 2 snd_hda_codec_conexant,snd_hda_intel

snd_hwdep 6392 1 snd_hda_codec

snd_seq 53791 0

snd_seq_device 6191 1 snd_seq

hp_wmi 6087 0

snd_pcm 80190 2 snd_hda_intel,snd_hda_codec

uvcvideo 55489 0

rfkill 17622 2 hp_wmi

snd_timer 19892 2 snd_seq,snd_pcm

r852 10070 0

sm_common 4276 1 r852

nand 32055 2 r852,sm_common

nand_ids 4258 1 nand

nand_ecc 3936 1 nand

mtd 18231 2 sm_common,nand

snd 63968 12 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer

videodev 41889 1 uvcvideo

edac_core 41336 0

wmi 8138 1 hp_wmi

v4l1_compat 12970 2 uvcvideo,videodev

v4l2_compat_ioctl32 9853 1 videodev

serio_raw 4640 0

lib80211 5095 2 lib80211_crypt_tkip,wl

microcode 18548 0

soundcore 6576 1 snd

forcedeth 48795 0

i2c_nforce2 6718 0

edac_mce_amd 7871 0

snd_page_alloc 7559 2 snd_hda_intel,snd_pcm

k8temp 3843 0

joydev 9737 0

i2c_core 26900 3 nvidia,videodev,i2c_nforce2

mmc_block 8860 2

sdhci_pci 7871 0

pata_acpi 3451 0

firewire_ohci 21170 0

video 21637 0

sdhci 18464 1 sdhci_pci

ata_generic 3475 0

mmc_core 64113 2 mmc_block,sdhci

firewire_core 45817 1 firewire_ohci

output 2253 1 video

sata_nv 20925 5

crc_itu_t 1563 2 udf,firewire_core

pata_amd 11314 1

[root@ws03f14 ws03]# modprobe b43

[root@ws03f14 ws03]#

 

 

[InIrudeBwoy]

Czy usunąłeś pakiet broadcom-wl? Ja widzę na liście modułów wl.

su -c 'yum remove broadcom-wl'

Następnie

rmmod wl
modprobe b43
dmesg | grep b43

[Slomiszer]

Witam po raz kolejny, ponizej zastosowanie twoich wskazówek krok po kroku.

 

 

[ws03@ws03f14 ~]$ su -c 'yum remove broadcom-wl'

Haslo:

Wczytane wtyczki: langpacks, presto, refresh-packagekit

Adding pl_PL to language list

Ustawianie procesu usuwania

Rozwiazywanie zaleznosci

--> Wykonywanie sprawdzania transakcji

---> Pakiet broadcom-wl.noarch 0:5.60.48.36-1.fc13 zostanie usuniety

--> Przetwarzanie zaleznosci: wl-kmod-common >= 5.60.48.36 dla pakietu: akmod-wl-5.60.48.36-2.fc14.1.x86_64

--> Przetwarzanie zaleznosci: wl-kmod-common >= 5.60.48.36 dla pakietu: kmod-wl-2.6.35.6-48.fc14.x86_64-5.60.48.36-2.fc14.2.x86_64

--> Wykonywanie sprawdzania transakcji

---> Pakiet akmod-wl.x86_64 0:5.60.48.36-2.fc14.1 zostanie usuniety

---> Pakiet kmod-wl-2.6.35.6-48.fc14.x86_64.x86_64 0:5.60.48.36-2.fc14.2 zostanie usuniety

--> Przetwarzanie zaleznosci: kmod-wl-2.6.35.6-48.fc14.x86_64 >= 5.60.48.36-2.fc14.2 dla pakietu: kmod-wl-5.60.48.36-2.fc14.2.x86_64

--> Wykonywanie sprawdzania transakcji

---> Pakiet kmod-wl.x86_64 0:5.60.48.36-2.fc14.2 zostanie usuniety

--> Ukonczono rozwiazywanie zaleznosci

 

Rozwiazano zaleznosci

 

================================================================================

Pakiet Architektura

Wersja Repozytorium Rozmiar

================================================================================

Usuwanie:

broadcom-wl noarch 5.60.48.36-1.fc13 @rpmfusion-nonfree-updates 16 k

Usuwanie, aby rozwiazac zaleznosci:

akmod-wl x86_64 5.60.48.36-2.fc14.1 @rpmfusion-nonfree-updates 1.7 M

kmod-wl x86_64 5.60.48.36-2.fc14.2 @rpmfusion-nonfree-updates 0.0

kmod-wl-2.6.35.6-48.fc14.x86_64

x86_64 5.60.48.36-2.fc14.2 @rpmfusion-nonfree-updates 2.3 M

 

Podsumowanie transakcji

================================================================================

Remove 4 Package(s)

 

Rozmiar po zainstalowaniu: 4.0 M

W porzadku? [t/N]: t

Pobieranie pakietów:

Wykonywanie rpm_check_debug

Wykonywanie testu transakcji

Test transakcji zostal ukonczony powodzeniem

Wykonywanie transakcji

Usuwanie : kmod-wl-5.60.48.36-2.fc14.2.x86_64 1/4

Usuwanie : kmod-wl-2.6.35.6-48.fc14.x86_64-5.60.48.36-2.fc14.2.x8 2/4

Usuwanie : akmod-wl-5.60.48.36-2.fc14.1.x86_64 3/4

Usuwanie : broadcom-wl-5.60.48.36-1.fc13.noarch 4/4

 

Usunieto:

broadcom-wl.noarch 0:5.60.48.36-1.fc13

 

Usunieto zaleznosc:

akmod-wl.x86_64 0:5.60.48.36-2.fc14.1

kmod-wl.x86_64 0:5.60.48.36-2.fc14.2

kmod-wl-2.6.35.6-48.fc14.x86_64.x86_64 0:5.60.48.36-2.fc14.2

 

Ukonczono.

[ws03@ws03f14 ~]$ rmmod wl

ERROR: Removing 'wl': Operation not permitted

[ws03@ws03f14 ~]$ su

Haslo:

rmmod wl

[root@ws03f14 ws03]# rmmod wl

[root@ws03f14 ws03]# rmmod wl

ERROR: Module wl does not exist in /proc/modules

[root@ws03f14 ws03]# modprobe b43

[root@ws03f14 ws03]# dmesg | grep b43

 

 

po tym wszystkim stala sie dziwna rzecz, dioda od WiFi zaczela swiecic na niebiesko,niestety polaczenia nie chce ustanowic...

zobacze moze pomoze maly restart.

Edytowane Listopad 11, 2010 przez Slomiszer

[InIrudeBwoy]

Ok. Jest postęp jakiś.

Czy restart pomógł?

Piszesz, że połączenia nie chce ustanowić, mam rozumieć że NetworkManager widzi kartę. Po restarcie dmesg musi coś pokazać po wywołaniu

dmesg | grep b43
dmesg | grep wlan
dmesg| grep eth

 

Jeśli nie to podejrzewam źle zainstalowane sterowniki z linuxwireless lub co gorsza (mało prawdopodobne), że karta w jakiś sposób nie jest wspierana.

[Slomiszer]

Witam, poniżej ponownie zwroty z konsoli.

powoli zaczyna mi sie wydawać że tracimy czas...

 

 

[root@ws03f14 ws03]# dmesg | grep b43

[ 11.003245] b43-pci-bridge 0000:01:00.0: PCI INT A -> Link[LK2E] -> GSI 19 (level, high) -> IRQ 19

[ 11.003258] b43-pci-bridge 0000:01:00.0: setting latency timer to 64

[ 11.925756] b43-phy0: Broadcom 4311 WLAN found (core revision 10)

[ 12.105547] Registered led device: b43-phy0::tx

[ 12.105582] Registered led device: b43-phy0::rx

[ 12.105617] Registered led device: b43-phy0::radio

[root@ws03f14 ws03]# dmesg | grep wlan

[root@ws03f14 ws03]# dmesg| grep eth

[ 10.688475] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[ 10.688981] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, high) -> IRQ 23

[ 10.688988] forcedeth 0000:00:14.0: setting latency timer to 64

[ 11.201458] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:d3:13:db:f2

[ 11.201465] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3

[ 145.170309] eth0: no IPv6 routers present

[ 389.144525] eth0: link down.

[ 390.827247] eth0: link up.

[root@ws03f14 ws03]#