Net24 Z Netii I Fc3

[enter1]

Witam

Bardzo proszę pomóżcie mi zainstalować modem thomson speedtouch 330 i skonfigurować połączenie w FC3. Próbowałem pomagać sobie opisem jak skonfigurować neostradę. Opis jest na głównej stronie fedora.pl w artykułe pt. : "Instalacja modemu Thompson Speedtouch na USB (Fedora Core 3: kernel 2.6.10) " z dnia 17.03.2005. Mam ten sam modem i ten sam kernel, jednakże opis dotyczy neostrady i niestety w usłudze NET24 netii ta metoda nie działa. Może ktoś już sobie z tym poradził i coś mi pomoże lub podpowie.

[santa]

najpierw zobacz to

ale jak doczytasz tu i jeszcze dodatkowo na poszukaj na tamtym forum wsio thompsonie i net24 to doczytasz ze skrypt ktory sciagniesz z pomoc.x.pl jest do malej poprawki; ja dostalem do kolesia poprawiony skrypt, jak podasz maila to Ci podesle. ja go nie wykorzystalem bo czekam na wymarzonego iBooka wiec i tak bede musial kupic rooter.

[enter1]

Dzieki za odpowiedź, ale to dotyczy neostrady a ja mam usługę udostępnioną przez netię

[santa]

a czytałeś dokładnie co jest napisane na stronie pomo.x.pl (tak przy okazji jest to faq stworzyny przez użytkowników netii dla użytkowników netii i tylko NETII), a jeśli przeczytałeś i zobaczyłeś plik ze skryptem do (_linuxa_ → Linuksa) ORT o wymownej nazwie: Net24_install.zip to nadal sądzisz że jest to dla użytkowników tepsy? zgadzam się na linku do forum suse są posty dla neostrady, ale jak poczytasz dokładnie to tez są posty o Net24. a dodatkowo napisałem abyś użyl tamtejszej wyszukiwarki podając hasła: "thopson" "netia" "net24" i kompilację tych haseł. ja Ci próbuję pomóc świadomie, nie tylko o tak bo nie mam co robić w pracy, ale wymagam też trochę pracy od Ciebie. chyba zdażyłeś się zorientować że w (_linuxie_ → Linuksie) ORT trzeba troche pracy włożyć aby zadziałało, więc pracuj.

[ebnowak]

Przepraszam, że pytam ale ...

 

czy masz modem na usb, czy wykorzystujący ethernet ?

 

Jeżeli USB to może wyświetl wyniki poleceń:

# cat /var/log/messages | grep firmware

# cat /var/log/messages | grep ppp

 

Jeżeli ethernet - to mam trochę zmodyfikowaną instrucję

Postaram się pomóc.

 

Pozdrawiam Błażej.

[santa]

o ile wiem thopmson speedtouch 330 jest modememtylko na USB i nie bylo wersji ethernet

[enter1]

Jak już pisałem postepowalem zgodnie z opisem ze strony głównej fedora.pl, a wiec po kolei:

 

INSTALACJA MODEMU THOMPSON SPEEDTOUCH na USB (Fedora Core 3: kernel 2.6.10)

 

 

1. Sprawdzić USB:

Speedtouch powinien być podłączony do usb ver 1.1 (z 2.0 nie działa stabilnie):

# lsusb -v -d 0x06b9: | grep bcdUSB | awk '{print $2}'

Wyniki:

1.10 Prawidłowo podłączony speedtouch

2.00 Powinniśmy "przepiąć" speedtouch-a na port USB: 1.1

U mnie jest 1.10

 

 

2. Sprawdzić WERSJ MODEMU:

# grep "Vendor=06b9 ProdID=4061" /proc/bus/usb/devices | awk '{print $5}' | head -1

Ja mam wersje modemu 4.00

 

 

3. Sprawdzić załadowane moduły:

# lsmod | grep speedtch

speedtch 12617 0

usb_atm 17009 2 speedtch

 

Ja mam tutaj:

speedtch 12617 0

usb_atm 17393 1 speedtch

 

4. Ściągnąć plik firmware-extractor:

http://linux-usb.sourceforge.net/SpeedTouc...mware-extractor

 

5. Ściągnąć plik z FIRMWARE:

 

5a. UWAGA: PODPUNKT TYLKO DLA WERSJI MODEMU 2 LUB 4:

http://www.speedtouch.com/download/drivers...rmware_3012.zip

 

# unzip SpeedTouch330_firmware_3012.zip (do katalogu z firmware-extractor)

(uzyskamy dwa pliki: ZZZL_3.012; KQD6_3.012)

 

6. Ze względu na to, że modemy te wykorzystuą dwa typy firmware:

FIRMWARE LOADER (speedtch-1.bin)

FIRMWARE FILE (speedtch-2.bin)

musimy podzielić jeden z powyższych plików:

 

# chmod u+x firmware-extractor

Dla wersji 4:

 

Powstaną dwa pliki mniejszy = loader; większy = firmware)

 

7. Skopiować wskazane pliki do /lib/firmware:

# cp speedtch-?.bin /lib/firmware

# chmod 644 /lib/firmware/speedtch-?.bin

# chown root:root /lib/firmware/speedtch-?.bin

 

8. Teraz najlepiej "przeładować" system, o po reboot powinno być:

# cat /var/log/messages | grep 'speedtch-'

Jan 11 18:19:43 xxx kernel: usb 3-1: found stage 1 firmware speedtch-1.bin

Jan 11 18:19:43 xxx kernel: usb 3-1: found stage 2 firmware speedtch-2.bin

 

U mnie tutaj jest:

Apr 14 11:43:57 localhost kernel: usb 3-1: found stage 1 firmware speedtch-1.bin

Apr 14 11:43:57 localhost kernel: usb 3-1: found stage 2 firmware speedtch-2.bin

Apr 14 12:09:44 localhost kernel: usb 3-1: found stage 1 firmware speedtch-1.bin

Apr 14 12:09:44 localhost kernel: usb 3-1: found stage 2 firmware speedtch-2.bin

Apr 14 15:50:50 localhost kernel: usb 3-1: found stage 1 firmware speedtch-1.bin

Apr 14 15:50:50 localhost kernel: usb 3-1: found stage 2 firmware speedtch-2.bin

 

# cat /proc/net/atm/speedtch:0

Speed Touch 330 (usb-0000:00:1d.1-1)

MAC: xx:xx:xx:xx:xx:xx

AAL5: tx 3976 ( 0 err ), rx 6760 ( 0 err, 0 drop )

Line up, firmware loaded <- to chyba jest najważniejsze

U mnie tutaj jest:

Speed Touch 330 (usb-0000:00:02.1-1)

MAC: xx:xx:xx:xx:xx:xx

AAL5: tx 30 ( 0 err ), rx 0 ( 0 err, 0 drop )

Line up, firmware loaded

 

9. Tworzymy plik /etc/sysconfig/network-scripts/ifcfg-ppp0 z następującą zawartością:

PEERDNS=yes

TYPE=xDSL

DEVICE=ppp0

BOOTPROTO=dialup

PIDFILE=/var/run/pppoa-adsl.pid

LCP_FAILURE=86400

LCP_INTERVAL=1

CONNECT_POLL=6

CONNECT_TIMEOUT=604800

SYNCHRONOUS=no

DEFROUTE=yes

[email protected] <- POPRAWIĆ NAZW UŻYTKOWNIKA

VPI=0

VCI=35

LINUX_PLUGIN=pppoatm.so

DEMAND=yes

 

Oczywiście utworzyłem

 

10. Tworzymy pliki: /etc/ppp/chap-secrets; /etc/ppp/pap-secrets z tą samą zawartością:

"[email protected]" "*" "PASSWORD" "*" <- POPRAWIĆ NAZW UŻYTKOWNIKA i HASŁO

 

U mnie wygląda tak plik ifcfg-pppO:

PEERDNS=yes

TYPE=xDSL

DEVICE=ppp0

BOOTPROTO=dialup

PIDFILE=/var/run/pppoa-adsl.pid

LCP_FAILURE=86400

LCP_INTERVAL=1

CONNECT_POLL=6

CONNECT_TIMEOUT=604800

SYNCHRONOUS=no

DEFROUTE=yes

[email protected] - tu mój login

VPI=0

VCI=35

LINUX_PLUGIN=pppoatm.so

DEMAND=yes

 

10. Tworzymy pliki: /etc/ppp/chap-secrets; /etc/ppp/pap-secrets z tą samą zawartością:

"[email protected]" "*" "PASSWORD" "*" <- POPRAWIĆ NAZW UŻYTKOWNIKA i HASŁO

 

U mnie oba pliki wyglądaja tak:

"USER" "[email protected]" "PASSWORD" "xxxxxxxxx" - tu oczywiście mój login i hasło

 

11. Wykonać:

# cd /etc/ppp

# chown 0:0 chap-secrets pap-secrets

# chmod 600 chap-secrets pap-secrets

 

12. Ostatnim krokiem jest "przeładowanie" systemu.

 

Na koniec dodam jeszcze, że gdy uruchomię Network Device Control to otrzymuję

Status Active, Device ppp0, Nickname ppp0

 

Jak sprawdzić czy wszystko jest OK i jak się połaczyć (uzyć jakiegoś skryptu?), w tej chwili mozilla mi się nie łączy.

 

Marek

[ebnowak]

Czy mozesz "podesłać" zawartości plików:

# cat /var/adm/messages | grep ppp

oraz:

# cat /etc/resolv.conf

oraz:

# cat /etc/ppp/options

 

jak również wyniki poleceń:

# ifconfig -a

oraz:

# netstat -r

 

Myślę, że analiza tego co "zobaczymy" rozwiąże problem

 

Pozdrawiam.

Błażej.

 

PS. Przepraszam "za niedoczytanie" tego, że posiadasz model: speedtouch thomson 330

[enter1]

Witam

 

pliku var/adm/messages nie mam, nie mam katalogu adm

 

plik etc/resolv.conf jest pusty ma 0 bajtow

 

plik etc/ppp/options jest pusty ma 0 bajtow

 

 

[root@localhost enter]# ifconfig -a

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:2881 errors:0 dropped:0 overruns:0 frame:0

TX packets:2881 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:2736150 (2.6 MiB) TX bytes:2736150 (2.6 MiB)

 

ppp0 Link encap:Point-to-Point Protocol

inet addr:10.112.112.112 P-t-P:10.112.112.113 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:3 errors:0 dropped:9 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:0 (0.0 TX bytes:264 (264.0

 

sit0 Link encap:IPv6-in-IPv4

NOARP MTU:1480 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 TX bytes:0 (0.0

ifconfig -a

 

[root@localhost enter]# netstat -r

Kernel IP routing table

Destination Gateway Genmask Flags MSS Window irtt Iface

10.112.112.113 * 255.255.255.255 UH 0 0 0 ppp0

169.254.0.0 * 255.255.0.0 U 0 0 0 lo

default 10.112.112.113 0.0.0.0 UG 0 0 0 ppp0

 

 

 

Sorry, nie odpowiadam szybciej ale musz do sieci wchodzic poprzez winxp. Aby cokolwiek sprawdzic musze uruchamiac fedore, co razem chwile trwa.

 

Marek

[ebnowak]

chodzilo mi o:

# cat /var/log/messages | grep ppp

 

Nie mam Net24, ale wyczytałem, że w pliku ifcfg-pppO parametr:

VPI=8

 

powinien mieć w Twoim przypadku nie 0 a 8.

 

Po wprowadzeniu tej zmiany mam prośbę o "dezaktywacje" i ponowaną "aktywację" użądzenia ppp0 w menu:

Aplikacje->Ustawienia systemowe-> Network

 

Pozdrawiam Błażej

[santa]

faktycznie vpi musi mieć wartość 8; a zawartość pliku resolv znajdziesz z FAQ na stronie netii, albo na stronie pomoc.x.pl, ja zadzwoniłem na infolinię i się dowiedziałem ale teraz jestem na windzie a nie pamietam tych ip. i jeszcze raz powtórze: wszelkie sposoby na neostradę (_napewno_ → na pewno) ORT nie będą działały w przypadku net24

[ebnowak]

Postaram się oby sposób przedstawiony przezemnie na www.fedora.pl: INSTALACJA MODEMU THOMPSON SPEEDTOUCH na USB (Fedora Core 3: kernel 2.6.10) został przetestowany przez użytkowników Net24. Nie jest on wyłącznie dedykowany do rozwiązań neostrady (działa również w innych krajach, z zupełnie innymi providerami) ... więc z dużym prawdopodobieństwem mogę stwierdzić, że SANTA nie ma racji.

 

Pozdrawiam Błażej.

 

Net24 będzie działać

 

Co do /etc/resolv.conf to również (na razie) nie sugeruj się wskazaniami mojego przedmówcy. W przypadku zwestawienia połączenia ... otrzymasz wpisy DNS automatycznie (plik "sam" się wypełni właściwymi adresami).

 

Myślę, że pomoc oraz stwierdzenia typu "NA PEWNO NIE BDZIE DZIAŁAĆ" w informatyce nie powinny mieć często miejsca

 

Czekam na wyniki zmiany VPI.

[enter1]

Witam

Zrobiłem jak prosiłeś. Trochę poszukałem i okazało się, że VPI ma wynosić 8 a VCI 35

Teraz w pliku ifcfg-ppp0 mam:

 

PEERDNS=yes

TYPE=xDSL

DEVICE=ppp0

BOOTPROTO=dialup

PIDFILE=/var/run/pppoa-adsl.pid

LCP_FAILURE=86400

LCP_INTERVAL=1

CONNECT_POLL=6

CONNECT_TIMEOUT=604800

SYNCHRONOUS=no

DEFROUTE=yes

[email protected]

VPI=8

VCI=35

LINUX_PLUGIN=pppoatm.so

DEMAND=yes

 

Sprawdziłem jeszcze raz chap-secrets z pap-secrets i znalazłem taką zawartość (system dodał sam kilka linii):

 

# Secrets for authentication using PAP

# client server secret IP addresses

"USER" "[email protected]" "PASSWORD" "xxxxxxxx"

####### redhat-config-network will overwrite this part!!! (begin) ##########

"[email protected] " "ppp0" "None"

"[email protected] " "ppp0" "None"

"[email protected] " * "None"

####### redhat-config-network will overwrite this part!!! (end) ############

Oczywiście hasło i login się zgadza. Jednakże dalej nie mam połączenia z internetem. Mozilla przy próbie uruchomienia podaje komunikat, że nie może znależć strony.

 

Marek

[ebnowak]

Prośba wyniki:

 

# cat /var/log/messages | grep ppp

# ifconfig -a ppp0

 

to dużo nam da

Pozdrawiam Błażej.

 

Linie:

####### redhat-config-network will overwrite this part!!! (begin) ##########

"[email protected] " "ppp0" "None"

"[email protected] " "ppp0" "None"

"[email protected] " * "None"

####### redhat-config-network will overwrite this part!!! (end) ############

usuń (z obu plików).

[enter1]

NIŻEJ SĄ wyniki:

 

# cat /var/log/messages | grep ppp

# ifconfig -a ppp0

 

[root@localhost enter]# cat /var/log/messages | grep ppp

 

Apr 14 11:43:49 localhost pppd[4309]: Plugin pppoatm.so loaded.

Apr 14 11:43:49 localhost pppd[4309]: PPPoATM plugin_init

Apr 14 11:43:49 localhost pppd[4309]: PPPoATM setdevname_pppoatm - SUCCESS:0.35

Apr 14 11:43:49 localhost pppd[4309]: pppd 2.4.2 started by root, uid 0

Apr 14 11:43:49 localhost pppd[4309]: Using interface ppp0

Apr 14 11:43:49 localhost pppd[4309]: local IP address 10.112.112.112

Apr 14 11:43:49 localhost pppd[4309]: remote IP address 10.112.112.113

Apr 14 11:43:52 localhost pppd[4309]: Starting link

Apr 14 11:43:52 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 14 11:43:52 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 14 11:43:52 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 14 11:44:22 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 14 11:44:22 localhost pppd[4309]: Connection terminated.

Apr 14 11:44:56 localhost pppd[4309]: Starting link

Apr 14 11:44:56 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 14 11:44:56 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 14 11:44:56 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 14 11:45:26 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 14 11:45:26 localhost pppd[4309]: Connection terminated.

Apr 14 11:46:00 localhost pppd[4309]: Starting link

Apr 14 11:46:00 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 14 11:46:00 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 14 11:46:00 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 14 11:46:30 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 14 11:46:30 localhost pppd[4309]: Connection terminated.

Apr 14 11:46:54 localhost system-config-network[5800]: ln //etc/sysconfig/networ

k-scripts//ifcfg-ppp0 //etc/sysconfig/networking/devices//ifcfg-ppp0

Apr 14 11:46:54 localhost system-config-network[5800]: Linking ppp0 to devices a

nd putting it in profile default.

Apr 14 11:46:54 localhost system-config-network[5800]: ln //etc/sysconfig/networ

king/devices//ifcfg-ppp0 //etc/sysconfig/networking/profiles//default/ifcfg-ppp0

Apr 14 11:50:54 localhost system-config-network[5800]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 11:50:54 localhost system-config-network[5800]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:07:35 localhost system-config-network[5984]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:07:35 localhost system-config-network[5984]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:08:06 localhost pppd[4309]: Starting link

Apr 14 12:08:06 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 14 12:08:06 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:08:06 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:09:36 localhost pppd[4286]: Plugin pppoatm.so loaded.

Apr 14 12:09:36 localhost pppd[4286]: PPPoATM plugin_init

Apr 14 12:09:36 localhost pppd[4286]: PPPoATM setdevname_pppoatm - SUCCESS:0.35

Apr 14 12:09:36 localhost pppd[4286]: pppd 2.4.2 started by root, uid 0

Apr 14 12:09:36 localhost pppd[4286]: Using interface ppp0

Apr 14 12:09:36 localhost pppd[4286]: local IP address 10.112.112.112

Apr 14 12:09:36 localhost pppd[4286]: remote IP address 10.112.112.113

Apr 14 12:09:39 localhost pppd[4286]: Starting link

Apr 14 12:09:39 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:09:39 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:09:39 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:10:09 localhost pppd[4286]: LCP: timeout sending Config-Requests

Apr 14 12:10:09 localhost pppd[4286]: Connection terminated.

Apr 14 12:10:43 localhost pppd[4286]: Starting link

Apr 14 12:10:43 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:10:43 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:10:43 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:11:13 localhost pppd[4286]: LCP: timeout sending Config-Requests

Apr 14 12:11:13 localhost pppd[4286]: Connection terminated.

Apr 14 12:11:47 localhost pppd[4286]: Starting link

Apr 14 12:11:47 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:11:47 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:11:47 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:12:17 localhost pppd[4286]: LCP: timeout sending Config-Requests

Apr 14 12:12:17 localhost pppd[4286]: Connection terminated.

Apr 14 12:15:47 localhost system-config-network[5793]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:15:47 localhost system-config-network[5793]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:15:48 localhost pppd[5958]: pppd 2.4.2 started by root, uid 0

Apr 14 12:15:48 localhost pppd[5958]: Using interface ppp1

Apr 14 12:15:48 localhost pppd[5958]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:15:48 localhost pppoe[5959]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:15:48 localhost pppd[5958]: Modem hangup

Apr 14 12:15:48 localhost pppd[5958]: Connection terminated.

Apr 14 12:15:49 localhost pppd[5958]: Exit.

Apr 14 12:15:54 localhost pppd[5998]: pppd 2.4.2 started by root, uid 0

Apr 14 12:15:54 localhost pppoe[5999]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:15:54 localhost pppd[5998]: Using interface ppp1

Apr 14 12:15:54 localhost pppd[5998]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:15:54 localhost pppd[5998]: Modem hangup

Apr 14 12:15:54 localhost pppd[5998]: Connection terminated.

Apr 14 12:15:54 localhost pppd[5998]: Exit.

Apr 14 12:15:59 localhost pppd[6040]: pppd 2.4.2 started by root, uid 0

Apr 14 12:15:59 localhost pppoe[6041]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:15:59 localhost pppd[6040]: Using interface ppp1

Apr 14 12:15:59 localhost pppd[6040]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:15:59 localhost pppd[6040]: Modem hangup

Apr 14 12:15:59 localhost pppd[6040]: Connection terminated.

Apr 14 12:15:59 localhost pppd[6040]: Exit.

Apr 14 12:16:04 localhost pppd[6082]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:04 localhost pppd[6082]: Using interface ppp1

Apr 14 12:16:04 localhost pppd[6082]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:04 localhost pppoe[6083]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:04 localhost pppd[6082]: Modem hangup

Apr 14 12:16:04 localhost pppd[6082]: Connection terminated.

Apr 14 12:16:04 localhost pppd[6082]: Exit.

Apr 14 12:16:04 localhost hal.hotplug[6017]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:16:09 localhost pppd[6130]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:09 localhost pppd[6130]: Using interface ppp1

Apr 14 12:16:09 localhost pppd[6130]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:09 localhost pppoe[6131]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:09 localhost pppd[6130]: Modem hangup

Apr 14 12:16:09 localhost pppd[6130]: Connection terminated.

Apr 14 12:16:09 localhost pppd[6130]: Exit.

Apr 14 12:16:09 localhost hal.hotplug[6069]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:16:14 localhost pppd[6178]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:14 localhost pppoe[6179]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:14 localhost pppd[6178]: Using interface ppp1

Apr 14 12:16:14 localhost pppd[6178]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:14 localhost pppd[6178]: Modem hangup

Apr 14 12:16:14 localhost pppd[6178]: Connection terminated.

Apr 14 12:16:14 localhost pppd[6178]: Exit.

Apr 14 12:16:14 localhost hal.hotplug[6107]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:16:19 localhost pppd[6226]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:19 localhost pppoe[6227]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:19 localhost pppd[6226]: Using interface ppp1

Apr 14 12:16:19 localhost pppd[6226]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:19 localhost pppd[6226]: Modem hangup

Apr 14 12:16:19 localhost pppd[6226]: Connection terminated.

Apr 14 12:16:19 localhost pppd[6226]: Exit.

Apr 14 12:16:19 localhost hal.hotplug[6149]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:16:24 localhost pppd[6272]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:24 localhost pppd[6272]: Using interface ppp1

Apr 14 12:16:24 localhost pppd[6272]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:24 localhost pppoe[6273]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:24 localhost pppd[6272]: Modem hangup

Apr 14 12:16:24 localhost pppd[6272]: Connection terminated.

Apr 14 12:16:24 localhost pppd[6272]: Exit.

Apr 14 12:16:29 localhost pppd[6314]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:29 localhost pppoe[6315]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:29 localhost pppd[6314]: Using interface ppp1

Apr 14 12:16:29 localhost pppd[6314]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:29 localhost pppd[6314]: Modem hangup

Apr 14 12:16:29 localhost pppd[6314]: Connection terminated.

Apr 14 12:16:29 localhost pppd[6314]: Exit.

Apr 14 12:16:29 localhost hal.hotplug[6257]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:16:34 localhost pppd[6368]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:34 localhost pppoe[6369]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:34 localhost pppd[6368]: Using interface ppp1

Apr 14 12:16:34 localhost pppd[6368]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:34 localhost pppd[6368]: Modem hangup

Apr 14 12:16:34 localhost pppd[6368]: Connection terminated.

Apr 14 12:16:34 localhost pppd[6368]: Exit.

Apr 14 12:16:39 localhost pppd[6410]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:39 localhost pppoe[6411]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:39 localhost pppd[6410]: Using interface ppp1

Apr 14 12:16:39 localhost pppd[6410]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:39 localhost pppd[6410]: Modem hangup

Apr 14 12:16:39 localhost pppd[6410]: Connection terminated.

Apr 14 12:16:39 localhost pppd[6410]: Exit.

Apr 14 12:16:39 localhost hal.hotplug[6339]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:16:43 localhost pppd[4286]: Starting link

Apr 14 12:16:43 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:16:43 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:16:43 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:16:44 localhost pppd[6465]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:44 localhost pppoe[6466]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:44 localhost pppd[6465]: Using interface ppp1

Apr 14 12:16:44 localhost pppd[6465]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:44 localhost pppd[6465]: Modem hangup

Apr 14 12:16:44 localhost pppd[6465]: Connection terminated.

Apr 14 12:16:44 localhost pppd[6465]: Exit.

Apr 14 12:16:49 localhost pppd[6513]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:49 localhost pppd[6513]: Using interface ppp1

Apr 14 12:16:49 localhost pppd[6513]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:49 localhost pppoe[6514]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:49 localhost pppd[6513]: Modem hangup

Apr 14 12:16:49 localhost pppd[6513]: Connection terminated.

Apr 14 12:16:49 localhost pppd[6513]: Exit.

Apr 14 12:16:54 localhost pppd[6547]: pppd 2.4.2 started by root, uid 0

Apr 14 12:16:54 localhost pppoe[6548]: ioctl(SIOCGIFHWADDR): Session 0: No such

device

Apr 14 12:16:54 localhost pppd[6547]: Using interface ppp1

Apr 14 12:16:54 localhost pppd[6547]: Connect: ppp1 <--> /dev/pts/2

Apr 14 12:16:54 localhost pppd[6547]: Modem hangup

Apr 14 12:16:54 localhost pppd[6547]: Connection terminated.

Apr 14 12:16:54 localhost pppd[6547]: Exit.

Apr 14 12:16:54 localhost hal.hotplug[6490]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:17:04 localhost hal.hotplug[6578]: timout(10000 ms) waiting for /class

/net/ppp1

Apr 14 12:17:13 localhost pppd[4286]: LCP: timeout sending Config-Requests

Apr 14 12:17:13 localhost pppd[4286]: Connection terminated.

Apr 14 12:17:26 localhost system-config-network[6617]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:17:26 localhost system-config-network[6617]: chmod 0775 //etc/sysconfi

g/networking/devices/ifcfg-ppp0

Apr 14 12:17:45 localhost pppd[4286]: Starting link

Apr 14 12:17:45 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:17:45 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:17:45 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:18:15 localhost pppd[4286]: LCP: timeout sending Config-Requests

Apr 14 12:18:15 localhost pppd[4286]: Connection terminated.

Apr 14 12:18:49 localhost pppd[4286]: Starting link

Apr 14 12:18:49 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:18:49 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:18:49 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 12:19:19 localhost pppd[4286]: LCP: timeout sending Config-Requests

Apr 14 12:19:19 localhost pppd[4286]: Connection terminated.

Apr 14 12:22:13 localhost pppd[4286]: Starting link

Apr 14 12:22:13 localhost pppd[4286]: Connect: ppp0 <--> 0.35

Apr 14 12:22:13 localhost pppd[4286]: Couldn't increase MTU to 1500. Using 1492

Apr 14 12:22:13 localhost pppd[4286]: Couldn't increase MRU to 1500. Using 1492

Apr 14 15:50:42 localhost pppd[4329]: Plugin pppoatm.so loaded.

Apr 14 15:50:42 localhost pppd[4329]: PPPoATM plugin_init

Apr 14 15:50:42 localhost pppd[4329]: PPPoATM setdevname_pppoatm - SUCCESS:0.35

Apr 14 15:50:42 localhost pppd[4329]: pppd 2.4.2 started by root, uid 0

Apr 14 15:50:42 localhost pppd[4329]: Using interface ppp0

Apr 14 15:50:42 localhost pppd[4329]: local IP address 10.112.112.112

Apr 14 15:50:42 localhost pppd[4329]: remote IP address 10.112.112.113

Apr 14 15:50:44 localhost pppd[4329]: Starting link

Apr 14 15:50:44 localhost pppd[4329]: Connect: ppp0 <--> 0.35

Apr 14 15:50:44 localhost pppd[4329]: Couldn't increase MTU to 1500. Using 1492

Apr 14 15:50:44 localhost pppd[4329]: Couldn't increase MRU to 1500. Using 1492

Apr 14 15:51:14 localhost pppd[4329]: LCP: timeout sending Config-Requests

Apr 14 15:51:14 localhost pppd[4329]: Connection terminated.

Apr 14 15:51:48 localhost pppd[4329]: Starting link

Apr 14 15:51:48 localhost pppd[4329]: Connect: ppp0 <--> 0.35

Apr 14 15:51:48 localhost pppd[4329]: Couldn't increase MTU to 1500. Using 1492

Apr 14 15:51:48 localhost pppd[4329]: Couldn't increase MRU to 1500. Using 1492

Apr 14 15:52:18 localhost pppd[4329]: LCP: timeout sending Config-Requests

Apr 14 15:52:18 localhost pppd[4329]: Connection terminated.

Apr 14 15:52:52 localhost pppd[4329]: Starting link

Apr 14 15:52:52 localhost pppd[4329]: Connect: ppp0 <--> 0.35

Apr 14 15:52:52 localhost pppd[4329]: Couldn't increase MTU to 1500. Using 1492

Apr 14 15:52:52 localhost pppd[4329]: Couldn't increase MRU to 1500. Using 1492

Apr 14 15:53:22 localhost pppd[4329]: LCP: timeout sending Config-Requests

Apr 14 15:53:22 localhost pppd[4329]: Connection terminated.

Apr 14 16:25:38 localhost pppd[4329]: Starting link

Apr 14 16:25:38 localhost pppd[4329]: Connect: ppp0 <--> 0.35

Apr 14 16:25:38 localhost pppd[4329]: Couldn't increase MTU to 1500. Using 1492

Apr 14 16:25:38 localhost pppd[4329]: Couldn't increase MRU to 1500. Using 1492

Apr 14 18:36:05 localhost pppd[4322]: Plugin pppoatm.so loaded.

Apr 14 18:36:05 localhost pppd[4322]: PPPoATM plugin_init

Apr 14 18:36:05 localhost pppd[4322]: PPPoATM setdevname_pppoatm - SUCCESS:0.35

Apr 14 18:36:05 localhost pppd[4322]: pppd 2.4.2 started by root, uid 0

Apr 14 18:36:05 localhost pppd[4322]: Using interface ppp0

Apr 14 18:36:05 localhost pppd[4322]: local IP address 10.112.112.112

Apr 14 18:36:05 localhost pppd[4322]: remote IP address 10.112.112.113

Apr 14 18:36:07 localhost pppd[4322]: Starting link

Apr 14 18:36:07 localhost pppd[4322]: Connect: ppp0 <--> 0.35

Apr 14 18:36:07 localhost pppd[4322]: Couldn't increase MTU to 1500. Using 1492

Apr 14 18:36:07 localhost pppd[4322]: Couldn't increase MRU to 1500. Using 1492

Apr 14 18:36:37 localhost pppd[4322]: LCP: timeout sending Config-Requests

Apr 14 18:36:37 localhost pppd[4322]: Connection terminated.

Apr 14 18:37:11 localhost pppd[4322]: Starting link

Apr 14 18:37:11 localhost pppd[4322]: Connect: ppp0 <--> 0.35

Apr 14 18:37:11 localhost pppd[4322]: Couldn't increase MTU to 1500. Using 1492

Apr 14 18:37:11 localhost pppd[4322]: Couldn't increase MRU to 1500. Using 1492

Apr 14 18:37:41 localhost pppd[4322]: LCP: timeout sending Config-Requests

Apr 14 18:37:41 localhost pppd[4322]: Connection terminated.

Apr 14 18:38:15 localhost pppd[4322]: Starting link

Apr 14 18:38:15 localhost pppd[4322]: Connect: ppp0 <--> 0.35

Apr 14 18:38:15 localhost pppd[4322]: Couldn't increase MTU to 1500. Using 1492

Apr 14 18:38:15 localhost pppd[4322]: Couldn't increase MRU to 1500. Using 1492

Apr 14 18:38:45 localhost pppd[4322]: LCP: timeout sending Config-Requests

Apr 14 18:38:45 localhost pppd[4322]: Connection terminated.

Apr 14 18:53:12 localhost pppd[4322]: Starting link

Apr 14 18:53:12 localhost pppd[4322]: Connect: ppp0 <--> 0.35

Apr 14 18:53:12 localhost pppd[4322]: Couldn't increase MTU to 1500. Using 1492

Apr 14 18:53:12 localhost pppd[4322]: Couldn't increase MRU to 1500. Using 1492

Apr 14 19:30:36 localhost pppd[4323]: Plugin pppoatm.so loaded.

Apr 14 19:30:36 localhost pppd[4323]: PPPoATM plugin_init

Apr 14 19:30:36 localhost pppd[4323]: PPPoATM setdevname_pppoatm - SUCCESS:0.35

Apr 14 19:30:36 localhost pppd[4323]: pppd 2.4.2 started by root, uid 0

Apr 14 19:30:36 localhost pppd[4323]: Using interface ppp0

Apr 14 19:30:36 localhost pppd[4323]: local IP address 10.112.112.112

Apr 14 19:30:36 localhost pppd[4323]: remote IP address 10.112.112.113

Apr 14 19:30:39 localhost pppd[4323]: Starting link

Apr 14 19:30:39 localhost pppd[4323]: Connect: ppp0 <--> 0.35

Apr 14 19:30:39 localhost pppd[4323]: Couldn't increase MTU to 1500. Using 1492

Apr 14 19:30:39 localhost pppd[4323]: Couldn't increase MRU to 1500. Using 1492

Apr 14 19:31:09 localhost pppd[4323]: LCP: timeout sending Config-Requests

Apr 14 19:31:09 localhost pppd[4323]: Connection terminated.

Apr 14 19:31:43 localhost pppd[4323]: Starting link

Apr 14 19:31:43 localhost pppd[4323]: Connect: ppp0 <--> 0.35

Apr 14 19:31:43 localhost pppd[4323]: Couldn't increase MTU to 1500. Using 1492

Apr 14 19:31:43 localhost pppd[4323]: Couldn't increase MRU to 1500. Using 1492

Apr 14 19:32:13 localhost pppd[4323]: LCP: timeout sending Config-Requests

Apr 14 19:32:13 localhost pppd[4323]: Connection terminated.

Apr 14 19:32:47 localhost pppd[4323]: Starting link

Apr 14 19:32:47 localhost pppd[4323]: Connect: ppp0 <--> 0.35

Apr 14 19:32:47 localhost pppd[4323]: Couldn't increase MTU to 1500. Using 1492

Apr 14 19:32:47 localhost pppd[4323]: Couldn't increase MRU to 1500. Using 1492

Apr 14 19:33:17 localhost pppd[4323]: LCP: timeout sending Config-Requests

Apr 14 19:33:17 localhost pppd[4323]: Connection terminated.

Apr 14 19:37:49 localhost pppd[6085]: pppd 2.4.2 started by root, uid 0

Apr 14 19:37:49 localhost pppd[6085]: Using interface ppp1

Apr 14 19:37:49 localhost pppd[6085]: Connect: ppp1 <--> /dev/pts/3

Apr 14 19:38:16 localhost pppd[6085]: Hangup (SIGHUP)

Apr 14 19:38:16 localhost pppd[6085]: Modem hangup

Apr 14 19:38:16 localhost pppd[6085]: Connection terminated.

Apr 14 19:38:16 localhost pppd[6085]: Exit.

Apr 14 19:40:36 localhost pppd[4323]: Starting link

Apr 14 19:40:36 localhost pppd[4323]: Connect: ppp0 <--> 0.35

Apr 14 19:40:36 localhost pppd[4323]: Couldn't increase MTU to 1500. Using 1492

Apr 14 19:40:36 localhost pppd[4323]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:22:01 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 15 09:22:01 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:22:01 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:22:31 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 15 09:22:31 localhost pppd[4309]: Connection terminated.

Apr 15 09:23:05 localhost pppd[4309]: Starting link

Apr 15 09:23:05 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 15 09:23:05 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:23:05 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:23:35 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 15 09:23:35 localhost pppd[4309]: Connection terminated.

Apr 15 09:24:09 localhost pppd[4309]: Starting link

Apr 15 09:24:09 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 15 09:24:09 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:24:09 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:24:39 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 15 09:24:39 localhost pppd[4309]: Connection terminated.

Apr 15 09:43:57 localhost pppd[4309]: Starting link

Apr 15 09:43:57 localhost pppd[4309]: Connect: ppp0 <--> 0.35

Apr 15 09:43:57 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:43:57 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:45:16 localhost pppd[4268]: Plugin pppoatm.so loaded.

Apr 15 09:45:16 localhost pppd[4268]: PPPoATM plugin_init

Apr 15 09:45:16 localhost pppd[4268]: PPPoATM setdevname_pppoatm - SUCCESS:8.35

Apr 15 09:45:16 localhost pppd[4268]: pppd 2.4.2 started by root, uid 0

Apr 15 09:45:16 localhost pppd[4268]: Using interface ppp0

Apr 15 09:45:16 localhost pppd[4268]: local IP address 10.112.112.112

Apr 15 09:45:16 localhost pppd[4268]: remote IP address 10.112.112.113

Apr 15 09:45:19 localhost pppd[4268]: Starting link

Apr 15 09:45:19 localhost pppd[4268]: Connect: ppp0 <--> 8.35

Apr 15 09:45:19 localhost pppd[4268]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:45:19 localhost pppd[4268]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:45:49 localhost pppd[4268]: LCP: timeout sending Config-Requests

Apr 15 09:45:49 localhost pppd[4268]: Connection terminated.

Apr 15 09:46:23 localhost pppd[4268]: Starting link

Apr 15 09:46:23 localhost pppd[4268]: Connect: ppp0 <--> 8.35

Apr 15 09:46:23 localhost pppd[4268]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:46:23 localhost pppd[4268]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:46:53 localhost pppd[4268]: LCP: timeout sending Config-Requests

Apr 15 09:46:53 localhost pppd[4268]: Connection terminated.

Apr 15 09:47:27 localhost pppd[4268]: Starting link

Apr 15 09:47:27 localhost pppd[4268]: Connect: ppp0 <--> 8.35

Apr 15 09:47:27 localhost pppd[4268]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:47:27 localhost pppd[4268]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:47:57 localhost pppd[4268]: LCP: timeout sending Config-Requests

Apr 15 09:47:57 localhost pppd[4268]: Connection terminated.

Apr 15 09:53:44 localhost pppd[4268]: Starting link

Apr 15 09:53:44 localhost pppd[4268]: Connect: ppp0 <--> 8.35

Apr 15 09:53:44 localhost pppd[4268]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:53:44 localhost pppd[4268]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:56:05 localhost pppd[4264]: Connect: ppp0 <--> 8.35

Apr 15 09:56:05 localhost pppd[4264]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:56:05 localhost pppd[4264]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:56:35 localhost pppd[4264]: LCP: timeout sending Config-Requests

Apr 15 09:56:35 localhost pppd[4264]: Connection terminated.

Apr 15 09:57:09 localhost pppd[4264]: Starting link

Apr 15 09:57:09 localhost pppd[4264]: Connect: ppp0 <--> 8.35

Apr 15 09:57:09 localhost pppd[4264]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:57:09 localhost pppd[4264]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:57:39 localhost pppd[4264]: LCP: timeout sending Config-Requests

Apr 15 09:57:39 localhost pppd[4264]: Connection terminated.

Apr 15 09:58:13 localhost pppd[4264]: Starting link

Apr 15 09:58:13 localhost pppd[4264]: Connect: ppp0 <--> 8.35

Apr 15 09:58:13 localhost pppd[4264]: Couldn't increase MTU to 1500. Using 1492

Apr 15 09:58:13 localhost pppd[4264]: Couldn't increase MRU to 1500. Using 1492

Apr 15 09:58:43 localhost pppd[4264]: LCP: timeout sending Config-Requests

Apr 15 09:58:43 localhost pppd[4264]: Connection terminated.

Apr 15 10:10:27 localhost pppd[4264]: Starting link

Apr 15 10:10:27 localhost pppd[4264]: Connect: ppp0 <--> 8.35

Apr 15 10:10:27 localhost pppd[4264]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:10:27 localhost pppd[4264]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:52:29 localhost pppd[4293]: Plugin pppoatm.so loaded.

Apr 15 10:52:29 localhost pppd[4293]: PPPoATM plugin_init

Apr 15 10:52:29 localhost pppd[4293]: PPPoATM setdevname_pppoatm - SUCCESS:8.35

Apr 15 10:52:29 localhost pppd[4293]: pppd 2.4.2 started by root, uid 0

Apr 15 10:52:29 localhost pppd[4293]: Using interface ppp0

Apr 15 10:52:29 localhost pppd[4293]: local IP address 10.112.112.112

Apr 15 10:52:29 localhost pppd[4293]: remote IP address 10.112.112.113

Apr 15 10:52:31 localhost pppd[4293]: Starting link

Apr 15 10:52:31 localhost pppd[4293]: Connect: ppp0 <--> 8.35

Apr 15 10:52:31 localhost pppd[4293]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:52:31 localhost pppd[4293]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:53:01 localhost pppd[4293]: LCP: timeout sending Config-Requests

Apr 15 10:53:01 localhost pppd[4293]: Connection terminated.

Apr 15 10:53:35 localhost pppd[4293]: Starting link

Apr 15 10:53:35 localhost pppd[4293]: Connect: ppp0 <--> 8.35

Apr 15 10:53:35 localhost pppd[4293]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:53:35 localhost pppd[4293]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:54:05 localhost pppd[4293]: LCP: timeout sending Config-Requests

Apr 15 10:54:05 localhost pppd[4293]: Connection terminated.

Apr 15 10:54:39 localhost pppd[4293]: Starting link

Apr 15 10:54:39 localhost pppd[4293]: Connect: ppp0 <--> 8.35

Apr 15 10:54:39 localhost pppd[4293]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:54:39 localhost pppd[4293]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:55:09 localhost pppd[4293]: LCP: timeout sending Config-Requests

Apr 15 10:55:09 localhost pppd[4293]: Connection terminated.

Apr 15 10:56:27 localhost pppd[4293]: Starting link

Apr 15 10:56:27 localhost pppd[4293]: Connect: ppp0 <--> 8.35

Apr 15 10:56:27 localhost pppd[4293]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:56:27 localhost pppd[4293]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:57:48 localhost pppd[4309]: Plugin pppoatm.so loaded.

Apr 15 10:57:48 localhost pppd[4309]: PPPoATM plugin_init

Apr 15 10:57:48 localhost pppd[4309]: PPPoATM setdevname_pppoatm - SUCCESS:8.35

Apr 15 10:57:48 localhost pppd[4309]: pppd 2.4.2 started by root, uid 0

Apr 15 10:57:48 localhost pppd[4309]: Using interface ppp0

Apr 15 10:57:48 localhost pppd[4309]: local IP address 10.112.112.112

Apr 15 10:57:48 localhost pppd[4309]: remote IP address 10.112.112.113

Apr 15 10:57:50 localhost pppd[4309]: Starting link

Apr 15 10:57:50 localhost pppd[4309]: Connect: ppp0 <--> 8.35

Apr 15 10:57:50 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:57:50 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:58:20 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 15 10:58:20 localhost pppd[4309]: Connection terminated.

Apr 15 10:58:54 localhost pppd[4309]: Starting link

Apr 15 10:58:54 localhost pppd[4309]: Connect: ppp0 <--> 8.35

Apr 15 10:58:54 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:58:54 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 10:59:24 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 15 10:59:24 localhost pppd[4309]: Connection terminated.

Apr 15 10:59:58 localhost pppd[4309]: Starting link

Apr 15 10:59:58 localhost pppd[4309]: Connect: ppp0 <--> 8.35

Apr 15 10:59:58 localhost pppd[4309]: Couldn't increase MTU to 1500. Using 1492

Apr 15 10:59:58 localhost pppd[4309]: Couldn't increase MRU to 1500. Using 1492

Apr 15 11:00:28 localhost pppd[4309]: LCP: timeout sending Config-Requests

Apr 15 11:00:28 localhost pppd[4309]: Connection terminated.

 

[root@localhost enter]# ifconfig -a ppp0

ppp0 Link encap:Point-to-Point Protocol

inet addr:10.112.112.112 P-t-P:10.112.112.113 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:3 errors:0 dropped:9 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:0 (0.0 TX bytes:264 (264.0