F7 Nie Widzi Wentylatora

[@Kamills]

Mam Fedorę 7 i chciałem aby wentylator chodził z większą prędkością obrotową w moim laptopie Acer Aspire 5612 WLMi i w przypadku użycia komendy "fancontrol" pokazuje się brak pliku config.Myślę ok wpisze jak zobaczyłem na necie "pwmconfig" pokazuje "no sensors found" to czytam dalej wydaj polecenie "sensors" i to mnie zdziwiło "no sensors and fans founds".Małe zdziwko i patrze gdzie jest sprzęt poukładany i wiatraczki są w "/proc/acpi/fan/fanX", a u mnie nie ma "fanX".Wiecie co zrobić?Jakiś sterownik doinstalować?

 

Kamills

[Karlik]

A sensors-detect znajduje to?

[@Kamills]

Moim zdaniem nie ale weź sprawdź to jest wynik polecenia sensors-detect przy bezmyślnym wpisywaniu YES.

sensors-detect
# sensors-detect revision 4348 (2007-03-18 02:45:21 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7

We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-3)
Do you want to scan it? (YES/no/selectively): YES
Adapter cannot be probed, skipping.

Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-2)
Do you want to scan it? (YES/no/selectively): YES
Adapter cannot be probed, skipping.

Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-1)
Do you want to scan it? (YES/no/selectively): YES
Adapter cannot be probed, skipping.

Next adapter: SMBus I801 adapter at 18c0 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Success!
   (confidence 8, driver `eeprom')
Probing for `EDID EEPROM'...                                No
Probing for `Maxim MAX6900'...                              No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Success!
   (confidence 8, driver `eeprom')

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): YES 
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No

Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): YES
AMD K8 thermal sensors...                                   No
Intel Core family thermal sensor...                         Success!
   (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `eeprom' (should be inserted):
 Detects correctly:
 * Bus `SMBus I801 adapter at 18c0'
   Busdriver `i2c-i801', I2C address 0x50
   Chip `SPD EEPROM' (confidence: 8)
 * Bus `SMBus I801 adapter at 18c0'
   Busdriver `i2c-i801', I2C address 0x52
   Chip `SPD EEPROM' (confidence: 8)

 EEPROMs are *NOT* sensors! They are data storage chips commonly
 found on memory modules (SPD), in monitors (EDID), or in some
 laptops, for example.

Driver `coretemp' (should be inserted):
 Detects correctly:
 * Chip `Intel Core family thermal sensor' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue: 

To make the sensors modules behave correctly, add these lines to
/etc/modprobe.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# Chip drivers
modprobe eeprom
# Warning: the required module coretemp is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe coretemp
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.

Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): YES

[Karlik]

Niestety nie mam laptopa, a mój sprzęt jest dosyć wiekowy, więc nie za bardzo mam możliwość pomóc. W sumie to sensors-detect to było moje pierwsze skojarzenie do tego, ale w sumie to ma względnie niewiele wspólnego (zmyliło mnie "no sensors and fans founds"). Mimo wszystko dziwne zachowanie, że w ogóle nie wykrywa takiego sprzętu (może w bios-ie jest jakaś blokada czy coś?), bo inaczej powinno się pojawić wspomniane fanX (u mnie też nie ma, ale dla mnie to zrozumiałe, bo chyba nie mogę kontrolować wiatraczka, tak mi się przynajmniej wydaje).

[@Kamills]

Jedyne co moge w biosie zmienić date i godzine, kolejność bootowania i czy ma sie pokazywać logo Acera czy nie.

[Karlik]

hmmm.... a przy sensors pokazuje Ci wiatraczki? Bo teraz sprawdziłem u siebie i mogę sprawdzić szybkość obrotową (nie wiem jak z modyfikacją) jednego z trzech moich wiatraczków (dwa pozostałe chyba nie przekazują takiej informacji).

[@Kamills]

Właśnie chodzi mi o to że tam powinna być prędkość obrotowa wiatraczka, a w "fancontrol" można ją zmienić.