Samba - Bardzo Proszę O Pomoc.

[user_1990]

Witam. Uruchomiłem sambę , lecz działa mi tylko folder PUBLICZNY mogę na nim zapisywać pliki i je usuwać. A jak stworze kolejnego użytkownika i chcę w jego folderze coś zapisać to wyskakuje mi informacja " MUSISZ MIEĆ UPRAWNIENIA DO TEJ OPERACJI ". Myślałem ze to wina SElinux-a lecz po jego wyłączeniu problem nie znikną.

 

 

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba, 
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the 
# Samba-Guide which is generated daily and can be downloaded from: 
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Netwrok Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
workgroup = jars
server string = Samba Server Version %v

;	netbios name = JARS_SERWER
;	netbios aliases= SERWER
;	interfaces = lo eth0
;	hosts allow = 127. 192.168.

# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach

# logs split per machine
log file = /var/log/samba/log.%m
# max 50KB per log file, then rotate
max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# Scurity can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.

security = user
;	passdb backend = smbpasswd


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *


;	realm = MY_REALM

;	password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations. 
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#

;	domain master = yes 
;	domain logons = yes

# the login script name depends on the machine name
;	logon script = %m.bat
# the login script name depends on the unix user used
;	logon script = %u.bat
;	logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
;	logon path =          

;	add user script = /usr/sbin/useradd "%u" -n -g users
;	add group script = /usr/sbin/groupadd "%g"
;	add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
;	delete user script = /usr/sbin/userdel "%u"
;	delete user from group script = /usr/sbin/userdel "%u" "%g"
;	delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;	local master = no
;	os level = 33
;	preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
#   behalf of a non WINS capable client, for this to work there must be
#   at least one	WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

;	wins support = yes
;	wins server = w.x.y.z
;	wins proxy = yes

;	dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option

;	load printers = yes
cups options = raw

;	printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
;	printcap name = lpstat
;	printing = cups

# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

;	map archive = no
;	map hidden = no
;	map read only = no
;	map system = no
;	encrypt passwords = yes
;	guest ok = no
;	guest account = nobody
username map = /etc/samba/smbusers
;	store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writable = yes
;	valid users = %S
;	valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
;	guest ok = no
;	writable = No
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
;	[netlogon]
;	comment = Network Logon Service
;	path = /var/lib/samba/netlogon
;	guest ok = yes
;	writable = no
;	share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;	[Profiles]
;	path = /var/lib/samba/profiles
;	browseable = no
;	guest ok = yes


# A publicly accessible directory, but read only, except for people in
# the "staff" group
;	[public]
;	comment = Public Stuff
;	path = /home/samba
;	public = yes
;	writable = yes
;	printable = yes
;	write list = +staff

[DAWID_SERWER]
path = /DAWID_SERWER
writeable = yes
;	browseable = yes
guest ok = yes

 

 

 

Proszę o pomoc. Pozdrawiam Dawid

 

Edytowane Maj 21, 2009 przez WalDo
Prosze korzystać z odpowiednich tagów → code, codebox

[zajec00]

może to ci coś pomoże...

http://www.reallylinux.com/docs/sambaserver.shtml

ja w oparciu o tą publikacje stawiałem swoją sambę i jak na razie jest ok

 

moja konfiguracja samby :

 

[global]
workgroup = osemka
netbios name = Zajec
server string = samba
security = user
nt acl support = yes
nt pipe support = yes
domain master = no
local master = no
os level = 0
name resolve order = wins
wins server = 10.8.0.2
username map = /etc/samba/smbusers
;	encrypt passwords = yes
guest ok = yes
guest account = guest

[filmy]
path = /dane/filmy
;	browseable = yes
;	writeable = No

[muzyka]
path = /dane/muzyka
;	writeable = No
;	browseable = yes

[qmic]

Witam. Uruchomiłem sambę , lecz działa mi tylko folder PUBLICZNY mogę na nim zapisywać pliki i je usuwać. A jak stworze kolejnego użytkownika i chcę w jego folderze coś zapisać to wyskakuje mi informacja " MUSISZ MIEĆ UPRAWNIENIA DO TEJ OPERACJI ". Myślałem ze to wina SElinux-a lecz po jego wyłączeniu problem nie znikną.

 

Może usuń ; na początku odpowiedniej linii

; valid users = %S
; valid users = MYDOMAIN\%S

[user_1990]

Ok działa !! A może mi ktoś powiedzieć jak mogę określić ilość miejsca dla danego folderu ??

 

Np żeby folder DOKUMENTY miał tylko 5gb miejsca a folder DAWID 10gb. Proszę o odp. Pozdrawiam

[@Sorror]

Samba nie jest od tego. Rozmiar folderu ograniczysz za pomocą quota (man, google).

[user_1990]

Witam ponownie. Bardzo dziękuję za pomoc. ALE

 

Wszystko działało do czasu kiedy chciałem zmienić połączenie z internetem z DHCP na manualne. Kiedy chcę się zalogować w windowsie na uzytkownika to po wpisaniu danych(login: dawid , pass: dawid10) i wciśnięciu przycisku OK , znów pojawia się okno do logowania tyle ze w nazwie uzytkownika jest wpisane: BIURO\dawid . Nie dam rady się zalogować. Jeszcze zaznaczam że mam folder PUBLICZNY dla wszystkich na który można wejść bez hasła , ten folder działa bez zarzutów.

 

smb:

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba, 
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the 
# Samba-Guide which is generated daily and can be downloaded from: 
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Netwrok Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
workgroup = JARS
server string = Samba Server Version %v

;	netbios name = JARS_SERWER
;	interfaces = lo eth* 192.168.
;	hosts allow = 127. 192.168.

# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach

# logs split per machine
log file = /var/log/samba/log.%m
# max 50KB per log file, then rotate
max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# Scurity can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.

security = share
passdb backend = tdbsam


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *


;	realm = MY_REALM

;	password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations. 
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#

;	domain master = yes 
;	domain logons = yes

# the login script name depends on the machine name
;	logon script = %m.bat
# the login script name depends on the unix user used
;	logon script = %u.bat
;	logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
;	logon path =          

;	add user script = /usr/sbin/useradd "%u" -n -g users
;	add group script = /usr/sbin/groupadd "%g"
;	add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
;	delete user script = /usr/sbin/userdel "%u"
;	delete user from group script = /usr/sbin/userdel "%u" "%g"
;	delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;	local master = no
;	os level = 33
;	preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
#   behalf of a non WINS capable client, for this to work there must be
#   at least one	WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

;	wins support = yes
;	wins server = w.x.y.z
;	wins proxy = yes

;	dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option

;	load printers = yes
cups options = raw

;	printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
;	printcap name = lpstat
;	printing = cups

# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

;	map archive = no
;	map hidden = no
;	map read only = no
;	map system = no
username map = /etc/samba/smbusers
;	store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writable = yes
;	valid users = %S
;	valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
;	guest ok = no
;	writable = No
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
;	[netlogon]
;	comment = Network Logon Service
;	path = /var/lib/samba/netlogon
;	guest ok = yes
;	writable = no
;	share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;	[Profiles]
;	path = /var/lib/samba/profiles
;	browseable = no
;	guest ok = yes


# A publicly accessible directory, but read only, except for people in
# the "staff" group
;	[public]
;	comment = Public Stuff
;	path = /home/samba
;	public = yes
;	writable = yes
;	printable = no
;	write list = +staff

[dawid]
path = /home/dawid
writeable = yes
;	browseable = yes
valid users = dawid

[jars]
path = /serwer/jars
writeable = yes
;	browseable = yes
valid users = dawid, dawid_j, jaromir, robert

[public]
path = /serwer/public
writeable = yes
;	browseable = yes
guest ok = yes

smbusers:

 

root = administrator admin

nobody = guest pcguest smbguest

dawid = dawid

jaromir = jaromir

robert = robert

dawid_j = dawid_j

 

 

imhosts:

 

127.0.0.1 localhost

 

 

 

Zależy mi na tym żeby serwer łączył się z internetem na tym IP na którym ja chcę czyli 192.168.1.11 ale żeby też samba działała bez zarzutów jak wcześniej. Bardzo proszę o pomoc. Pozdrawiam Dawid

 

[JoleKK]

znów pojawia się okno do logowania tyle ze w nazwie uzytkownika jest wpisane: BIURO\dawid . Nie dam rady się zalogować. Jeszcze zaznaczam że mam folder PUBLICZNY dla wszystkich na który można wejść bez hasła , ten folder działa bez zarzutów.

 

a jak w oknie logowania wpiszesz:

nazwa kompa z samba\dawid i swoje haslo - tak dziala?

 

[user_1990]

NIestety nie Może są jeszcze jakieś inne propozycje??

[JoleKK]

Zobacz co pluja logi po nieudanym wejsciu do folderu.

[@Kamills]

Włącz logowanie sieciowe w windowsie i jako domene podaj adres IP kompa z sambą.

[user_1990]

Dalej mam ten sam problem.

 

"Kiedy chcę się zalogować w windowsie na uzytkownika to po wpisaniu danych(login: dawid , pass: dawid10) i wciśnięciu przycisku OK , znów pojawia się okno do logowania tyle ze w nazwie uzytkownika jest wpisane: BIURO\dawid . Nie dam rady się zalogować. Jeszcze zaznaczam że mam folder PUBLICZNY dla wszystkich na który można wejść bez hasła , ten folder działa bez zarzutów. "

 

Pomóżcie , bardzo proszę...

[JoleKK]

Logi?

[user_1990]

jak je sprawdzić ??

[user_1990]

Wyskakuje dokładnie coś takiego :

 

[zybex_pl]

aaaa kolega na viście - stary problem - tu masz rozwiązanie http://www.linux-watch.com/news/NS4434907782.html

 

streszczenie dła współczesnej młodzieży

 

Click "Start -> Run." Then, type in the Run field: "secpol.msc." That will bring you to Vista's security policy system. Once there, use "Go to: Local Policies > Security Options" and then find "Network Security: LAN Manager" authentication level. Once there, change the Setting from "Send NTLMv2 response only" to "Send LM & NTLM -- use NTLMv2 session security if negotiated."