Postfix - Błąd Przy Próbie Wysłania Maila

[ronon]

Witajcie,

 

Mam Fedore 10 i zainstalowałem na niej Postfix-a i Dovecot ze strony: http://www.linuxmail.info/postfix-smtp-ser...howto-centos-5/.

Oto te konfiguracje:

 

Postfix, main.cf

 

# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/libexec/postfix

# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
#
data_directory = /var/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
# 
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = poczta.int.oum.pl
#myhostname = virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = int.oum.pl

# SENDING MAIL
# 
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
#inet_interfaces = localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#	mail.$mydomain, www.$mydomain, ftp.$mydomain

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in    
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
# 
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# 
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#  
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
# 
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
mynetworks = 127.0.0.0/8 192.168.1.5/24
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# 
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# 
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
# 
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# 
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# 
# Specify 0 to disable the feature. Valid delays are 0..10.
# 
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# 
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp

# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
# server using LMTP (Local Mail Transport Protocol), this is prefered
# over the older cyrus deliver program by setting the
# mailbox_transport as below:
#
# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#
# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
# these settings.
#
# local_destination_recipient_limit = 300
# local_destination_concurrency_limit = 5
#
# Of course you should adjust these settings as appropriate for the
# capacity of the hardware you are using. The recipient limit setting
# can be used to take advantage of the single instance message store
# capability of Cyrus. The concurrency limit can be used to control
# how many simultaneous LMTP sessions will be permitted to the Cyrus
# message store. 
#
# To use the old cyrus deliver program you have to set:
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
# 
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
# 
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
# 
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# 
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
 ddd $daemon_directory/$process_name $process_id & sleep 5

# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
#	PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#	echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#	>$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
#	PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
#	-dmS $process_name gdb $daemon_directory/$process_name
#	$process_id & sleep 1

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
# 
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
# 
sendmail_path = /usr/sbin/sendmail.postfix

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases.postfix

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
# 
mailq_path = /usr/bin/mailq.postfix

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = postdrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = no

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/postfix-2.5.5/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/postfix-2.5.5/README_FILES
# Enable IPv4, and IPv6 if supported
inet_protocols = all

smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_auth_enable = yes
smtpd_recipient_restrictions =  permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
broken_sasl_auth_clients = yes

 

Dovecot, dovecot.conf :

 

## Dovecot configuration file

# If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration

# "dovecot -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting this file when posting to the Dovecot mailing list.

# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace  "

# Default values are shown for each setting, it's not required to uncomment
# any of the lines.

# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/

# Protocols we want to be serving: imap imaps pop3 pop3s managesieve
# If you only want to use dovecot-auth, you can set this to "none".
protocols = pop3 pop3s imap imaps

# A space separated list of IP or host addresses where to listen in for
# connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6
# interfaces. Use "*, [::]" for listening both IPv4 and IPv6.
#
# If you want to specify ports for each service, you will need to configure
# these settings inside the protocol imap/pop3/managesieve { ... } section, 
# so you can specify different ports for IMAP/POP3/MANAGESIEVE. For example:
#   protocol imap {
#     listen = *:10143
#     ssl_listen = *:10943
#     ..
#   }
#   protocol pop3 {
#     listen = *:10100
#     ..
#   }
#   protocol managesieve {
#     listen = *:12000
#     ..
#   }
#listen = *, [::]

# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
#disable_plaintext_auth = no

# Should all IMAP and POP3 processes be killed when Dovecot master process
# shuts down. Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is eg. because of a security fix). This however
# means that after master process has died, the client processes can't write
# to log files anymore.
#shutdown_clients = yes

##
## Logging
##

# Log file to use for error messages, instead of sending them to syslog.
# /dev/stderr can be used to log into stderr.
#log_path = 

# Log file to use for informational and debug messages.
# Default is the same as log_path.
#info_log_path = 

# Prefix for each line written to log file. % codes are in strftime(3)
# format.
#log_timestamp = "%b %d %H:%M:%S "

# Syslog facility to use if you're logging to syslog. Usually if you don't
# want to use "mail", you'll use local0..local7. Also other standard
# facilities are supported.
#syslog_facility = mail

##
## SSL settings
##

# IP or host address where to listen in for SSL connections. Remember to also
# add imaps and/or pop3s to protocols setting. Defaults to same as "listen"
# setting if not specified.
#ssl_listen =

# Disable SSL/TLS support. <doc/wiki/SSL.txt>
#ssl_disable = no

# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root. Included doc/mkcert.sh can be used to easily generate self-signed
# certificate, just make sure to update the domains in dovecot-openssl.cnf
#ssl_cert_file = /etc/pki/dovecot/certs/dovecot.pem
#ssl_key_file = /etc/pki/dovecot/private/dovecot.pem

# If key file is password protected, give the password here. Alternatively
# give it when starting dovecot with -p parameter. Since this file is often
# world-readable, you may want to place this setting instead to a different
# root owned 0600 file by using !include_try <path>.
#ssl_key_password =

# File containing trusted SSL certificate authorities. Set this only if you
# intend to use ssl_verify_client_cert=yes. The CAfile should contain the
# CA-certificate(s) followed by the matching CRL(s).
#ssl_ca_file = 

# Request client to send a certificate. If you also want to require it, set
# ssl_require_client_cert=yes in auth section.
#ssl_verify_client_cert = no

# Which field from certificate to use for username. commonName and
# x500UniqueIdentifier are the usual choices. You'll also need to set
# ssl_username_from_cert=yes.
#ssl_cert_username_field = commonName

# How often to regenerate the SSL parameters file. Generation is quite CPU
# intensive operation. The value is in hours, 0 disables regeneration
# entirely.
#ssl_parameters_regenerate = 168

# SSL ciphers to use
#ssl_cipher_list = ALL:!LOW:!SSLv2

# Show protocol level SSL errors.
#verbose_ssl = no

##
## Login processes
##

# <doc/wiki/LoginProcess.txt>

# Directory where authentication process places authentication UNIX sockets
# which login needs to be able to connect to. The sockets are created when
# running as root, so you don't have to worry about permissions. Note that
# everything in this directory is deleted when Dovecot is started.
#login_dir = /var/run/dovecot/login

# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#login_chroot = yes

# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#login_user = dovecot

# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
#login_process_size = 64

# Should each login be processed in it's own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
#login_process_per_connection = yes

# Number of login processes to keep for listening new connections.
#login_processes_count = 3

# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
#login_max_processes_count = 128

# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
#login_max_connections = 256

# Greeting message for clients.
#login_greeting = Dovecot ready.

# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c

# Login log format. %$ contains login_log_format_elements string, %s contains
# the data we want to log.
#login_log_format = %$: %s

##
## Mailbox locations and namespaces
##

# Location for users' mailboxes. This is the same as the old default_mail_env
# setting. The default is empty, which means that Dovecot tries to find the
# mailboxes automatically. This won't work if the user doesn't have any mail
# yet, so you should explicitly tell Dovecot the full location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
#   %u - username
#   %n - user part in user@domain, same as %u if there's no domain
#   %d - domain part in user@domain, empty if there's no domain
#   %h - home directory
#
# See <doc/wiki/Variables.txt> for full list. Some examples:
#
mail_location = maildir:~/Maildir
#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#
#mail_location = 

# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.
#
# You can have private, shared and public namespaces. The only difference
# between them is how Dovecot announces them to client via NAMESPACE
# extension. Shared namespaces are meant for user-owned mailboxes which are
# shared to other users, while public namespaces are for more globally
# accessible mailboxes.
#
# REMEMBER: If you add any namespaces, the default namespace must be added
# explicitly, ie. mail_location does nothing unless you have a namespace
# without a location setting. Default namespace is simply done by having a
# namespace with empty prefix.
#namespace private {
  # Hierarchy separator to use. You should use the same separator for all
  # namespaces or some clients get confused. '/' is usually a good one.
  # The default however depends on the underlying mail storage format.
  #separator = 

  # Prefix required to access this namespace. This needs to be different for
  # all namespaces. For example "Public/".
  #prefix = 

  # Physical location of the mailbox. This is in same format as
  # mail_location, which is also the default for it.
  #location =

  # There can be only one INBOX, and this setting defines which namespace
  # has it.
  #inbox = no

  # If namespace is hidden, it's not advertised to clients via NAMESPACE
  # extension. You'll most likely also want to set list=no. This is mostly
  # useful when converting from another server with different namespaces which
  # you want to deprecate but still keep working. For example you can create
  # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
  #hidden = yes

  # Show the mailboxes under this namespace with LIST command. This makes the
  # namespace visible for clients that don't support NAMESPACE extension.
  #list = yes

  # Namespace handles its own subscriptions. If set to "no", the parent
  # namespace handles them (empty prefix should always have this as "yes")
  #subscriptions = yes
#}

# System user and group used to access mails. If you use multiple, userdb
# can override these by returning uid or gid fields. You can use either numbers
# or names. <doc/wiki/UserIds.txt>
#mail_uid =
#mail_gid =

# Group to enable temporarily for privileged operations. Currently this is
# used only with INBOX when either its initial creation or dotlocking fails.
# Typically this is set to "mail" to give access to /var/mail.
#mail_privileged_group =

# Grant access to these supplementary groups for mail processes. Typically
# these are used to set up access to shared mailboxes. Note that it may be
# dangerous to set these if users can create symlinks (e.g. if "mail" group is
# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
#mail_access_groups =

# Allow full filesystem access to clients. There's no access checks other than
# what the operating system does for the active UID/GID. It works with both
# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
# or ~user/.
#mail_full_filesystem_access = no

##
## Mail processes
##

# Enable mail process debugging. This can help you figure out why Dovecot
# isn't finding your mails.
#mail_debug = no

# Log prefix for mail processes. See <doc/wiki/Variables.txt> for list of
# possible variables you can use.
#mail_log_prefix = "%Us(%u): "

# Max. number of lines a mail process is allowed to log per second before it's
# throttled. 0 means unlimited. Typically there's no need to change this
# unless you're using mail_log plugin, which may log a lot. This setting is
# ignored while mail_debug=yes to avoid pointless throttling.
#mail_log_max_lines_per_sec = 10

# Don't use mmap() at all. This is required if you store indexes to shared
# filesystems (NFS or clustered filesystem).
#mmap_disable = no

# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
# since version 3, so this should be safe to use nowadays by default.
#dotlock_use_excl = yes

# Don't use fsync() or fdatasync() calls. This makes the performance better
# at the cost of potential data loss if the server (or the file server)
# goes down.
#fsync_disable = no

# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
# whenever needed. If you're using only a single mail server this isn't needed.
#mail_nfs_storage = no
# Mail index files also exist in NFS. Setting this to yes requires
# mmap_disable=yes and fsync_disable=no.
#mail_nfs_index = no

# Locking method for index files. Alternatives are fcntl, flock and dotlock.
# Dotlocking uses some tricks which may create more disk I/O than other locking
# methods. NFS users: flock doesn't work, remember to change mmap_disable.
#lock_method = fcntl

# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
#mail_drop_priv_before_exec = no

# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
#verbose_proctitle = no

# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
#first_valid_uid = 500
#last_valid_uid = 0

# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
#first_valid_gid = 1
#last_valid_gid = 0

# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
#max_mail_processes = 512

# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
#mail_process_size = 256

# Maximum allowed length for mail keyword name. It's only forced when trying
# to create new keywords.
#mail_max_keyword_length = 50

# ':' separated list of directories under which chrooting is allowed for mail
# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
# This setting doesn't affect login_chroot, mail_chroot or auth chroot
# settings. If this setting is empty, "/./" in home dirs are ignored.
# WARNING: Never add directories here which local users can modify, that
# may lead to root exploit. Usually this should be done only if you don't
# allow shell access for users. <doc/wiki/Chrooting.txt>
#valid_chroot_dirs = 

# Default chroot directory for mail processes. This can be overridden for
# specific users in user database by giving /./ in user's home directory
# (eg. /home/./user chroots into /home). Note that usually there is no real
# need to do chrooting, Dovecot doesn't allow users to access files outside
# their mail directory anyway. If your home directories are prefixed with
# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
#mail_chroot = 

##
## Mailbox handling optimizations
##

# The minimum number of mails in a mailbox before updates are done to cache
# file. This allows optimizing Dovecot's behavior to do less disk writes at
# the cost of more disk reads.
#mail_cache_min_mail_count = 0

# When IDLE command is running, mailbox is checked once in a while to see if
# there are any new mails or other changes. This setting defines the minimum
# time in seconds to wait between those checks. Dovecot can also use dnotify,
# inotify and kqueue to find out immediately when changes occur.
#mailbox_idle_check_interval = 30

# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no

##
## Maildir-specific settings
##

# By default LIST command returns all entries in maildir beginning with a dot.
# Enabling this option makes Dovecot return only entries which are directories.
# This is done by stat()ing each entry, so it causes more disk I/O.
# (For systems setting struct dirent->d_type, this check is free and it's
# done always regardless of this setting)
#maildir_stat_dirs = no

# When copying a message, do it with hard links whenever possible. This makes
# the performance much better, and it's unlikely to have any side effects.
#maildir_copy_with_hardlinks = yes

# When copying a message, try to preserve the base filename. Only if the
# destination mailbox already contains the same name (ie. the mail is being
# copied there twice), a new name is given. The destination filename check is
# done only by looking at dovecot-uidlist file, so if something outside
# Dovecot does similar filename preserving copies, you may run into problems.
# NOTE: This setting requires maildir_copy_with_hardlinks = yes to work.
#maildir_copy_preserve_filename = no

##
## mbox-specific settings
##

# Which locking methods to use for locking mbox. There are four available:
#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
#           solution. If you want to use /var/mail/ like directory, the users
#           will need write access to that directory.
#  dotlock_try: Same as dotlock, but if it fails because of permissions or
#               because there isn't enough disk space, just skip it.
#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
#  flock  : May not exist in all systems. Doesn't work with NFS.
#  lockf  : May not exist in all systems. Doesn't work with NFS.
#
# You can use multiple locking methods; if you do the order they're declared
# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
# locking methods as well. Some operating systems don't allow using some of
# them simultaneously.
#mbox_read_locks = fcntl
#mbox_write_locks = fcntl

# Maximum time in seconds to wait for lock (all of them) before aborting.
#mbox_lock_timeout = 300

# If dotlock exists but the mailbox isn't modified in any way, override the
# lock file after this many seconds.
#mbox_dotlock_change_timeout = 120

# When mbox changes unexpectedly we have to fully read it to find out what
# changed. If the mbox is large this can take a long time. Since the change
# is usually just a newly appended mail, it'd be faster to simply read the
# new mails. If this setting is enabled, Dovecot does this but still safely
# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
# how it's expected to be. The only real downside to this setting is that if
# some other MUA changes message flags, Dovecot doesn't notice it immediately.
# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK 
# commands.
#mbox_dirty_syncs = yes

# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
#mbox_very_dirty_syncs = no

# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
# commands and when closing the mailbox). This is especially useful for POP3
# where clients often delete all mails. The downside is that our changes
# aren't immediately visible to other MUAs.
#mbox_lazy_writes = yes

# If mbox size is smaller than this (in kilobytes), don't write index files.
# If an index file already exists it's still read, just not updated.
#mbox_min_index_size = 0

##
## dbox-specific settings
##

# Maximum dbox file size in kilobytes until it's rotated.
#dbox_rotate_size = 2048

# Minimum dbox file size in kilobytes before it's rotated
# (overrides dbox_rotate_days)
#dbox_rotate_min_size = 16

# Maximum dbox file age in days until it's rotated. Day always begins from
# midnight, so 1 = today, 2 = yesterday, etc. 0 = check disabled.
#dbox_rotate_days = 0

##
## IMAP specific settings
##

protocol imap {
 # Login executable location.
 #login_executable = /usr/libexec/dovecot/imap-login

 # IMAP executable location. Changing this allows you to execute other
 # binaries before the imap process is executed.
 #
 # This would write rawlogs into ~/dovecot.rawlog/ directory:
 #   mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap
 #
 # This would attach gdb into the imap process and write backtraces into
 # /tmp/gdbhelper.* files:
 #   mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap
 #
 #mail_executable = /usr/libexec/dovecot/imap

 # Maximum IMAP command line length in bytes. Some clients generate very long
 # command lines with huge mailboxes, so you may need to raise this if you get
 # "Too long argument" or "IMAP command line too large" errors often.
 #imap_max_line_length = 65536

 # Maximum number of IMAP connections allowed for a user from each IP address.
 # NOTE: The username is compared case-sensitively.
 #mail_max_userip_connections = 10

 # Support for dynamically loadable plugins. mail_plugins is a space separated
 # list of plugins to load.
 #mail_plugins = 
 #mail_plugin_dir = /usr/lib/dovecot/imap

 # Send IMAP capabilities in greeting message. This makes it unnecessary for
 # clients to request it with CAPABILITY command, so it saves one round-trip.
 # Many clients however don't understand it and ask the CAPABILITY anyway.
 #login_greeting_capability = no

 # IMAP logout format string:
 #  %i - total number of bytes read from client
 #  %o - total number of bytes sent to client
 #imap_logout_format = bytes=%i/%o

 # Override the IMAP CAPABILITY response.
 #imap_capability = 

 # Workarounds for various client bugs:
 #   delay-newmail:
 #     Send EXISTS/RECENT new mail notifications only when replying to NOOP
 #     and CHECK commands. Some clients ignore them otherwise, for example OSX
 #     Mail (<v2.1). Outlook Express breaks more badly though, without this it
 #     may show user "Message no longer in server" errors. Note that OE6 still
 #     breaks even with this workaround if synchronization is set to
 #     "Headers Only".
 #   netscape-eoh:
 #     Netscape 4.x breaks if message headers don't end with the empty "end of
 #     headers" line. Normally all messages have this, but setting this
 #     workaround makes sure that Netscape never breaks by adding the line if
 #     it doesn't exist. This is done only for FETCH BODY[HEADER.FIELDS..]
 #     commands. Note that RFC says this shouldn't be done.
 #   tb-extra-mailbox-sep:
 #     With mbox storage a mailbox can contain either mails or submailboxes,
 #     but not both. Thunderbird separates these two by forcing server to
 #     accept '/' suffix in mailbox names in subscriptions list.
 # The list is space-separated.
imap_client_workarounds = delay-newmail outlook-idle netscape-eoh 
}

##
## POP3 specific settings
##

protocol pop3 {
 # Login executable location.
 #login_executable = /usr/libexec/dovecot/pop3-login

 # POP3 executable location. See IMAP's mail_executable above for examples
 # how this could be changed.
 #mail_executable = /usr/libexec/dovecot/pop3

 # Don't try to set mails non-recent or seen with POP3 sessions. This is
 # mostly intended to reduce disk I/O. With maildir it doesn't move files
 # from new/ to cur/, with mbox it doesn't write Status-header.
 #pop3_no_flag_updates = no

 # Support LAST command which exists in old POP3 specs, but has been removed
 # from new ones. Some clients still wish to use this though. Enabling this
 # makes RSET command clear all \Seen flags from messages.
 #pop3_enable_last = no

 # If mail has X-UIDL header, use it as the mail's UIDL.
 #pop3_reuse_xuidl = no

 # Keep the mailbox locked for the entire POP3 session.
 #pop3_lock_session = no

 # POP3 UIDL (unique mail identifier) format to use. You can use following
 # variables, along with the variable modifiers described in
 # <doc/wiki/Variables.txt> (e.g. %Uf for the filename in uppercase)
 #
 #  %v - Mailbox's IMAP UIDVALIDITY
 #  %u - Mail's IMAP UID
 #  %m - MD5 sum of the mailbox headers in hex (mbox only)
 #  %f - filename (maildir only)
 #
 # If you want UIDL compatibility with other POP3 servers, use:
 #  UW's ipop3d         : %08Xv%08Xu
 #  Courier             : %f or %v-%u (both might be used simultaneosly)
 #  Cyrus (<= 2.1.3)    : %u
 #  Cyrus (>= 2.1.4)    : %v.%u
 #  Dovecot v0.99.x     : %v.%u
 #  tpop3d              : %Mf
 #
 # Note that Outlook 2003 seems to have problems with %v.%u format which was
 # Dovecot's default, so if you're building a new server it would be a good
 # idea to change this. %08Xu%08Xv should be pretty fail-safe.
 #
pop3_uidl_format = %08Xu%08Xv

 # POP3 logout format string:
 #  %i - total number of bytes read from client
 #  %o - total number of bytes sent to client
 #  %t - number of TOP commands
 #  %p - number of bytes sent to client as a result of TOP command
 #  %r - number of RETR commands
 #  %b - number of bytes sent to client as a result of RETR command
 #  %d - number of deleted messages
 #  %m - number of messages (before deletion)
 #  %s - mailbox size in bytes (before deletion)
 #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s

 # Maximum number of POP3 connections allowed for a user from each IP address.
 # NOTE: The username is compared case-sensitively.
 #mail_max_userip_connections = 3

 # Support for dynamically loadable plugins. mail_plugins is a space separated
 # list of plugins to load.
 #mail_plugins = 
 #mail_plugin_dir = /usr/lib/dovecot/pop3

 # Workarounds for various client bugs:
 #   outlook-no-nuls:
 #     Outlook and Outlook Express hang if mails contain NUL characters.
 #     This setting replaces them with 0x80 character.
 #   oe-ns-eoh:
 #     Outlook Express and Netscape Mail breaks if end of headers-line is
 #     missing. This option simply sends it if it's missing.
 # The list is space-separated.
pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
}

##
## MANAGESIEVE specific settings
##

protocol managesieve {
 # Login executable location.
 #login_executable = /usr/libexec/dovecot/managesieve-login

 # MANAGESIEVE executable location. See IMAP's mail_executable above for 
 # examples how this could be changed.
 #mail_executable = /usr/libexec/dovecot/managesieve

 # Maximum MANAGESIEVE command line length in bytes. This setting is 
 # directly borrowed from IMAP. But, since long command lines are very
 # unlikely with MANAGESIEVE, changing this will not be very useful.  
 #managesieve_max_line_length = 65536

 # Specifies the location of the symlink pointing to the active script in
 # the sieve storage directory. This must match the SIEVE setting used by
 # deliver (refer to http://wiki.dovecot.org/LDA/Sieve#location for more
 # info). Variable substitution with % is recognized.
 sieve=~/.dovecot.sieve

 # This specifies the path to the directory where the uploaded scripts must
 # be stored. In terms of '%' variable substitution it is identical to
 # dovecot's mail_location setting used by the mail protocol daemons.
 sieve_storage=~/sieve

 # If, for some inobvious reason, the sieve_storage remains unset, the 
 # managesieve daemon uses the specification of the mail_location to find out 
 # where to store the sieve files (see explaination in README.managesieve). 
 # The example below, when uncommented, overrides any global mail_location 
 # specification and stores all the scripts in '~/mail/sieve' if sieve_storage 
 # is unset. However, you should always use the sieve_storage setting.
 # mail_location = mbox:~/mail

 # To fool managesieve clients that are focused on timesieved you can
 # specify the IMPLEMENTATION capability that the dovecot reports to clients 
 # (default: dovecot).
 #managesieve_implementation_string = Cyrus timsieved v2.2.13
}

##
## LDA specific settings
##

protocol lda {
 # Address to use when sending rejection mails.
 postmaster_address = [email protected]

 # Hostname to use in various parts of sent mails, eg. in Message-Id.
 # Default is the system's real hostname.
 #hostname = 

 # Support for dynamically loadable plugins. mail_plugins is a space separated
 # list of plugins to load.
 #mail_plugins = 
 #mail_plugin_dir = /usr/lib/dovecot/lda

 # If user is over quota, return with temporary failure instead of
 # bouncing the mail.
 #quota_full_tempfail = no

 # Format to use for logging mail deliveries. You can use variables:
 #  %$ - Delivery status message (e.g. "saved to INBOX")
 #  %m - Message-ID
 #  %s - Subject
 #  %f - From address
 #deliver_log_format = msgid=%m: %$

 # Binary to use for sending mails.
 #sendmail_path = /usr/lib/sendmail

 # Subject: header to use for rejection mails. You can use the same variables
 # as for rejection_reason below.
 #rejection_subject = Automatically rejected mail

 # Human readable error message for rejection mails. You can use variables:
 #  %n = CRLF, %r = reason, %s = original subject, %t = recipient
 #rejection_reason = Your message to <%t> was automatically rejected:%n%r

 # UNIX socket path to master authentication server to find users.
 #auth_socket_path = /var/run/dovecot/auth-master
}

##
## Authentication processes
##

# Executable location
#auth_executable = /usr/libexec/dovecot/dovecot-auth

# Set max. process size in megabytes.
#auth_process_size = 256

# Authentication cache size in kilobytes. 0 means it's disabled.
# Note that bsdauth, PAM and vpopmail require cache_key to be set for caching
# to be used.
#auth_cache_size = 0
# Time to live in seconds for cached data. After this many seconds the cached
# record is no longer used, *except* if the main database lookup returns
# internal failure. We also try to handle password changes automatically: If
# user's previous authentication was successful, but this one wasn't, the
# cache isn't used. For now this works only with plaintext authentication.
#auth_cache_ttl = 3600
# TTL for negative hits (user not found). 0 disables caching them completely.
#auth_cache_negative_ttl = 3600

# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms =

# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm = 

# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
# an extra check to make sure user can't exploit any potential quote escaping
# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
# set this value to empty.
#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@

# Username character translations before it's looked up from databases. The
# value contains series of from -> to characters. For example "#@/@" means
# that '#' and '/' characters are translated to '@'.
#auth_username_translation =

# Username formatting before it's looked up from databases. You can use
# the standard variables here, eg. %Lu would lowercase the username, %n would
# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
# "-AT-". This translation is done after auth_username_translation changes.
#auth_username_format =

# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
# support for it), you can specify the separator character here. The format
# is then <username><separator><master username>. UW-IMAP uses "*" as the
# separator, so that could be a good choice.
#auth_master_user_separator =

# Username to use for users logging in with ANONYMOUS SASL mechanism
#auth_anonymous_username = anonymous

# More verbose logging. Useful for figuring out why authentication isn't
# working.
#auth_verbose = no

# Even more verbose logging for debugging purposes. Shows for example SQL
# queries.
#auth_debug = no

# In case of password mismatches, log the passwords and used scheme so the
# problem can be debugged. Enabling this also enables auth_debug.
#auth_debug_passwords = no

# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30

# Number of auth requests to handle before destroying the process. This may
# be useful if PAM plugins leak memory.
#auth_worker_max_request_count = 0

# Host name to use in GSSAPI principal names. The default is to use the
# name returned by gethostname().
#auth_gssapi_hostname =

# Kerberos keytab to use for the GSSAPI mechanism. Will use the system 
# default (usually /etc/krb5.keytab) if not specified.
#auth_krb5_keytab = 

# Do NTLM authentication using Samba's winbind daemon and ntlm_auth helper.
# <doc/wiki/Authentication/Mechanisms/Winbind.txt>
#auth_ntlm_use_winbind = no

# Path for Samba's ntlm_auth helper binary.
#auth_winbind_helper_path = /usr/bin/ntlm_auth

# Number of seconds to delay before replying to failed authentications.
#auth_failure_delay = 2

auth default {
 socket listen {
     client {
           path = /var/spool/postfix/private/auth
           mode = 0660
           user = postfix
           group = postfix
   }
}
 # Space separated list of wanted authentication mechanisms:
 #   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
 #   gss-spnego
 # NOTE: See also disable_plaintext_auth setting.
 mechanisms = plain

 #
 # Password database is used to verify user's password (and nothing more).
 # You can have multiple passdbs and userdbs. This is useful if you want to
 # allow both system users (/etc/passwd) and virtual users to login without
 # duplicating the system users into virtual database.
 #
 # <doc/wiki/PasswordDatabase.txt>
 #
 # By adding master=yes setting inside a passdb you make the passdb a list
 # of "master users", who can log in as anyone else. Unless you're using PAM,
 # you probably still want the destination user to be looked up from passdb
 # that it really exists. This can be done by adding pass=yes setting to the
 # master passdb. <doc/wiki/Authentication.MasterUsers.txt>

 # Users can be temporarily disabled by adding a passdb with deny=yes.
 # If the user is found from that database, authentication will fail.
 # The deny passdb should always be specified before others, so it gets
 # checked first. Here's an example:

 #passdb passwd-file {
   # File contains a list of usernames, one per line
   #args = /etc/dovecot.deny
   #deny = yes
 #}

 # PAM authentication. Preferred nowadays by most systems. 
 # Note that PAM can only be used to verify if user's password is correct,
 # so it can't be used as userdb. If you don't want to use a separate user
 # database (passwd usually), you can use static userdb.
 # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
 # authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt>
 passdb pam {
   # [session=yes] [setcred=yes] [failure_show_msg=yes]
   # [cache_key=<key>] [<service name>]
   #
   # session=yes makes Dovecot open and immediately close PAM session. Some
   # PAM plugins need this to work, such as pam_mkhomedir.
   #
   # setcred=yes makes Dovecot establish PAM credentials if some PAM plugins
   # need that. They aren't ever deleted though, so this isn't enabled by
   # default.
   #
   # cache_key can be used to enable authentication caching for PAM
   # (auth_cache_size also needs to be set). It isn't enabled by default
   # because PAM modules can do all kinds of checks besides checking password,
   # such as checking IP address. Dovecot can't know about these checks
   # without some help. cache_key is simply a list of variables (see
   # <doc/wiki/Variables.txt>) which must match for the cached data to be used.
   # Here are some examples:
   #   %u - Username must match. Probably sufficient for most uses.
   #   %u%r - Username and remote IP address must match.
   #   %u%s - Username and service (ie. IMAP, POP3) must match.
   # 
   # The service name can contain variables, for example %Ls expands to
   # pop3 or imap.
   #
   # Some examples:
   #   args = session=yes %Ls
   #   args = cache_key=%u dovecot
   #args = dovecot
 }

 # System users (NSS, /etc/passwd, or similiar)
 # In many systems nowadays this uses Name Service Switch, which is
 # configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
 #passdb passwd {
   # [blocking=yes] - See userdb passwd for explanation
   #args = 
 #}

 # Shadow passwords for system users (NSS, /etc/shadow or similiar).
 # Deprecated by PAM nowadays.
 # <doc/wiki/PasswordDatabase.Shadow.txt>
 #passdb shadow {
   # [blocking=yes] - See userdb passwd for explanation
   #args = 
 #}

 # PAM-like authentication for OpenBSD.
 # <doc/wiki/PasswordDatabase.BSDAuth.txt>
 #passdb bsdauth {
   # [cache_key=<key>] - See cache_key in PAM for explanation.
   #args =
 #}

 # passwd-like file with specified location
 # <doc/wiki/AuthDatabase.PasswdFile.txt>
 #passdb passwd-file {
   # [scheme=<default password scheme>] [username_format=<format>]
   # <Path for passwd-file>
   #args = 
 #}

 # checkpassword executable authentication
 # NOTE: You will probably want to use "userdb prefetch" with this.
 # <doc/wiki/PasswordDatabase.CheckPassword.txt>
 #passdb checkpassword {
   # Path for checkpassword binary
   #args = 
 #}

 # SQL database <doc/wiki/AuthDatabase.SQL.txt>
 #passdb sql {
   # Path for SQL configuration file, see doc/dovecot-sql-example.conf
   #args = 
 #}

 # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
 #passdb ldap {
   # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf
   #args = 
 #}

 # vpopmail authentication <doc/wiki/AuthDatabase.VPopMail.txt>
 #passdb vpopmail {
   # [cache_key=<key>] - See cache_key in PAM for explanation.
   # [quota_template=<template>] - %q expands to Maildir++ quota
   #   (eg. quota_template=quota_rule=*:backend=%q)
   #args =
 #}

 #
 # User database specifies where mails are located and what user/group IDs
 # own them. For single-UID configuration use "static".
 #
 # <doc/wiki/UserDatabase.txt>
 #

 # "prefetch" user database means that the passdb already provided the
 # needed information and there's no need to do a separate userdb lookup.
 # This can be made to work with SQL and LDAP databases, see their example
 # configuration files for more information how to do it.
 # <doc/wiki/UserDatabase.Prefetch.txt>
 #userdb prefetch {
 #}

 # System users (NSS, /etc/passwd, or similiar). In many systems nowadays this
 # uses Name Service Switch, which is configured in /etc/nsswitch.conf.
 # <doc/wiki/AuthDatabase.Passwd.txt>
 userdb passwd {
   # [blocking=yes] - By default the lookups are done in the main dovecot-auth
   # process. This setting causes the lookups to be done in auth worker
   # proceses. Useful with remote NSS lookups that may block.
   # NOTE: Be sure to use this setting with nss_ldap or users might get
   # logged in as each others!
   #args = 
 }

 # passwd-like file with specified location
 # <doc/wiki/AuthDatabase.PasswdFile.txt>
 #userdb passwd-file {
   # [username_format=<format>] <Path for passwd-file>
   #args =
 #}

 # static settings generated from template <doc/wiki/UserDatabase.Static.txt>
 #userdb static {
   # Template for the fields. Can return anything a userdb could normally
   # return. For example:
   #
   #  args = uid=500 gid=500 home=/var/mail/%u
   #
   # If you use deliver, it needs to look up users only from the userdb. This
   # of course doesn't work with static because there is no list of users.
   # Normally static userdb handles this by doing a passdb lookup. This works
   # with most passdbs, with PAM being the most notable exception. If you do
   # the user verification another way, you can add allow_all_users=yes to
   # the args in which case the passdb lookup is skipped.
   #
   #args =
 #}

 # SQL database <doc/wiki/AuthDatabase.SQL.txt>
 #userdb sql {
   # Path for SQL configuration file, see doc/dovecot-sql-example.conf
   #args = 
 #}

 # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
 #userdb ldap {
   # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf
   #args = 
 #}

 # vpopmail <doc/wiki/AuthDatabase.VPopMail.txt>
 #userdb vpopmail {
 #}

 # User to use for the process. This user needs access to only user and
 # password databases, nothing else. Only shadow and pam authentication
 # requires roots, so use something else if possible. Note that passwd
 # authentication with BSDs internally accesses shadow files, which also
 # requires roots. Note that this user is NOT used to access mails.
 # That user is specified by userdb above.
 user = root

 # Directory where to chroot the process. Most authentication backends don't
 # work if this is set, and there's no point chrooting if auth_user is root.
 # Note that valid_chroot_dirs isn't needed to use this setting.
 #chroot = 

 # Number of authentication processes to create
 #count = 1

 # Require a valid SSL client certificate or the authentication fails.
 #ssl_require_client_cert = no

 # Take the username from client's SSL certificate, using 
 # X509_NAME_get_text_by_NID() which returns the subject's DN's
 # CommonName. 
 #ssl_username_from_cert = no

 # It's possible to export the authentication interface to other programs:
 #socket listen {
   #master {
     # Master socket provides access to userdb information. It's typically
     # used to give Dovecot's local delivery agent access to userdb so it
     # can find mailbox locations.
     #path = /var/run/dovecot/auth-master
     #mode = 0600
     # Default user/group is the one who started dovecot-auth (root)
     #user = 
     #group = 
   #}
   #client {
     # The client socket is generally safe to export to everyone. Typical use
     # is to export it to your SMTP server so it can do SMTP AUTH lookups
     # using it.
     #path = /var/run/dovecot/auth-client
     #mode = 0660
   #}
 #}
}

# If you wish to use another authentication server than dovecot-auth, you can
# use connect sockets. They are assumed to be already running, Dovecot's master
# process only tries to connect to them. They don't need any other settings
# than the path for the master socket, as the configuration is done elsewhere.
# Note that the client sockets must exist in the login_dir.
#auth external {
#  socket connect {
#    master {
#      path = /var/run/dovecot/auth-master
#    }
#  }
#}

##
## Dictionary server settings
##

# Dictionary can be used by some plugins to store key=value lists.
# Currently this is only used by dict quota backend. The dictionary can be
# used either directly or though a dictionary server. The following dict block
# maps dictionary names to URIs when the server is used. These can then be
# referenced using URIs in format "proxy::<name>".

dict {
 #quota = mysql:/etc/dovecot-dict-quota.conf 
 #expire = db:/var/lib/dovecot/expire.db
}

# Path to Berkeley DB's configuration file. See doc/dovecot-db-example.conf
#dict_db_config = 

##
## Plugin settings
##

plugin {
 # Here you can give some extra environment variables to mail processes.
 # This is mostly meant for passing parameters to plugins. %variable
 # expansion is done for all values.

 # Quota plugin. Multiple backends are supported:
 #   dirsize: Find and sum all the files found from mail directory.
 #            Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
 #   dict: Keep quota stored in dictionary (eg. SQL)
 #   maildir: Maildir++ quota
 #   fs: Read-only support for filesystem quota
 #
 # Quota limits are set using "quota_rule" parameters, either in here or in
 # userdb. It's also possible to give mailbox-specific limits, for example:
 #   quota_rule = *:storage=1048576
 #   quota_rule2 = Trash:storage=102400
 # User has now 1GB quota, but when saving to Trash mailbox the user gets
 # additional 100MB.
 #
 # Multiple quota roots are also possible, for example:
 #   quota = dict:user::proxy::quota
 #   quota2 = dict:domain:%d:proxy::quota_domain
 #   quota_rule = *:storage=102400
 #   quota2_rule = *:storage=1048576
 # Gives each user their own 100MB quota and one shared 1GB quota within
 # the domain.
 #
 # You can execute a given command when user exceeds a specified quota limit.
 # Each quota root has separate limits. Only the command for the first
 # exceeded limit is excecuted, so put the highest limit first.
 # Note that % needs to be escaped as %%, otherwise "% " expands to empty.
 #   quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95
 #   quota_warning2 = storage=80%% /usr/local/bin/quota-warning.sh 80
 #quota = maildir

 # ACL plugin. vfile backend reads ACLs from "dovecot-acl" file from maildir
 # directory. You can also optionally give a global ACL directory path where
 # ACLs are applied to all users' mailboxes. The global ACL directory contains
 # one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter
 # specifies how many seconds to wait between stat()ing dovecot-acl file
 # to see if it changed.
 #acl = vfile:/etc/dovecot-acls:cache_secs=300

 # Convert plugin. If set, specifies the source storage path which is
 # converted to destination storage (mail_location) when the user logs in.
 # The existing mail directory is renamed to <dir>-converted.
 #convert_mail = mbox:%h/mail
 # Skip mailboxes which we can't open successfully instead of aborting.
 #convert_skip_broken_mailboxes = no
 # Skip directories beginning with '.'
 #convert_skip_dotdirs = no
 # If source storage has mailbox names with destination storage's hierarchy
 # separators, replace them with this character.
 #convert_alt_hierarchy_char = _

 # Trash plugin. When saving a message would make user go over quota, this
 # plugin automatically deletes the oldest mails from configured mailboxes
 # until the message can be saved within quota limits. The configuration file
 # is a text file where each line is in format: <priority> <mailbox name>
 # Mails are first deleted in lowest -> highest priority number order
 #trash = /etc/dovecot-trash.conf

 # Expire plugin. Mails are expunged from mailboxes after being there the
 # configurable time. The first expiration date for each mailbox is stored in
 # a dictionary so it can be quickly determined which mailboxes contain
 # expired mails. The actual expunging is done in a nightly cronjob, which
 # you must set up:
 #   dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool
 #expire = Trash 7 Spam 30
 #expire_dict = proxy::expire

 # Lazy expunge plugin. Currently works only with maildirs. When a user
 # expunges mails, the mails are moved to a mailbox in another namespace
 # (1st). When a mailbox is deleted, the mailbox is moved to another namespace
 # (2nd) as well. Also if the deleted mailbox had any expunged messages,
 # they're moved to a 3rd namespace. The mails won't be counted in quota,
 # and they're not deleted automatically (use a cronjob or something).
 #lazy_expunge = .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/

 # Events to log. Default is all.
 #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
 # Group events within a transaction to one line.
 #mail_log_group_events = 
 # Available fields: uid, box, msgid, size, vsize
 # size and vsize are available only for expunge and copy events.
 #mail_log_fields = uid box msgid size
}

 

Wszystko działa poprawnie, tzn. odbiera mi poczte, ale gdy chce wysłać to pisze mi, że serwer SMTP jest nieosiągalny.

Patrzałem w logi /var/log/maillog

 

Aug 17 12:25:13 localhost dovecot: Killed with signal 15
Aug 17 12:25:13 localhost dovecot: dovecot v1.1.16 starting up (core dumps disabled)
Aug 17 12:25:25 localhost postfix/postfix-script[3304]: stopping the Postfix mail system
Aug 17 12:25:25 localhost postfix/master[3241]: terminating on signal 15
Aug 17 12:25:26 localhost postfix/postfix-script[3355]: starting the Postfix mail system
Aug 17 12:25:26 localhost postfix/master[3356]: daemon started -- version 2.5.6, configuration /etc/postfix
Aug 17 12:33:47 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:33:47 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=2/942, del=0/2, size=910
Aug 17 12:34:36 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:34:36 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 12:42:30 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:42:30 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910

 

i wynika, że pocztę odebrał poprawnie, ale nie ma wzmianki o próbie wysyłania.

Czy do postfixa jest jakiś program, do wysylania e-maili? Czy jakaś opcja w main.cf jest nieaktywna?

 

Proszę o pomoc.

 

Z góry Dziekuję

[qmic]

Dokładniej opisz, w końcu mail doszedł czy nie ? Wyłączyłeś sendmail i włączyłeś postfixa w ogóle ?

 

W pliku master.cf zmień linię:

smtp inet n - n - - smtpd

na:

smtp inet n - n - - smtpd -v

(dodaj -v na końcu - będziesz miał dokładniejsze informacje z postfixa)

 

 

[ronon]

Dokładniej opisz, w końcu mail doszedł czy nie ? Wyłączyłeś sendmail i włączyłeś postfixa w ogóle ?

 

W pliku master.cf zmień linię:

smtp inet n - n - - smtpd

na:

smtp inet n - n - - smtpd -v

(dodaj -v na końcu - będziesz miał dokładniejsze informacje z postfixa)

 

 

Wyłączyłem sendmaila i włączyłem postfiksa. W pliku masters.cf dodałem:

 

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#			   (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp	  inet  n	   -	   n	   -	   -	   smtpd -v
#submission inet n	   -	   n	   -	   -	   smtpd
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps	 inet  n	   -	   n	   -	   -	   smtpd
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628	  inet  n	   -	   n	   -	   -	   qmqpd
pickup	fifo  n	   -	   n	   60	  1	   pickup
cleanup   unix  n	   -	   n	   -	   0	   cleanup
qmgr	  fifo  n	   -	   n	   300	 1	   qmgr
#qmgr	 fifo  n	   -	   n	   300	 1	   oqmgr
tlsmgr	unix  -	   -	   n	   1000?   1	   tlsmgr
rewrite   unix  -	   -	   n	   -	   -	   trivial-rewrite
bounce	unix  -	   -	   n	   -	   0	   bounce
defer	 unix  -	   -	   n	   -	   0	   bounce
trace	 unix  -	   -	   n	   -	   0	   bounce
verify	unix  -	   -	   n	   -	   1	   verify
flush	 unix  n	   -	   n	   1000?   0	   flush
proxymap  unix  -	   -	   n	   -	   -	   proxymap
proxywrite unix -	   -	   n	   -	   1	   proxymap
smtp	  unix  -	   -	   n	   -	   -	   smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay	 unix  -	   -	   n	   -	   -	   smtp
-o smtp_fallback_relay=
#	   -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq	 unix  n	   -	   n	   -	   -	   showq
error	 unix  -	   -	   n	   -	   -	   error
retry	 unix  -	   -	   n	   -	   -	   error
discard   unix  -	   -	   n	   -	   -	   discard
local	 unix  -	   n	   n	   -	   -	   local
virtual   unix  -	   n	   n	   -	   -	   virtual
lmtp	  unix  -	   -	   n	   -	   -	   lmtp
anvil	 unix  -	   -	   n	   -	   1	   anvil
scache	unix  -	   -	   n	   -	   1	   scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
#maildrop  unix  -	   n	   n	   -	   -	   pipe
#  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
#old-cyrus unix  -	   n	   n	   -	   -	   pipe
#  flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus	 unix  -	   n	   n	   -	   -	   pipe
#  user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp	  unix  -	   n	   n	   -	   -	   pipe
#  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ====================================================================
#
# Other external delivery methods.
#
#ifmail	unix  -	   n	   n	   -	   -	   pipe
#  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp	 unix  -	   n	   n	   -	   -	   pipe
#  flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix -	   n	   n	   -	   2	   pipe
#  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
#  ${nexthop} ${user} ${extension}
#
#mailman   unix  -	   n	   n	   -	   -	   pipe
#  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
#  ${nexthop} ${user}

 

Mail wysłany nie doszedł. Plik mail.log

 

Aug 17 12:25:13 localhost dovecot: Killed with signal 15
Aug 17 12:25:13 localhost dovecot: dovecot v1.1.16 starting up (core dumps disabled)
Aug 17 12:25:25 localhost postfix/postfix-script[3304]: stopping the Postfix mail system
Aug 17 12:25:25 localhost postfix/master[3241]: terminating on signal 15
Aug 17 12:25:26 localhost postfix/postfix-script[3355]: starting the Postfix mail system
Aug 17 12:25:26 localhost postfix/master[3356]: daemon started -- version 2.5.6, configuration /etc/postfix
Aug 17 12:33:47 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:33:47 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=2/942, del=0/2, size=910
Aug 17 12:34:36 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:34:36 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 12:42:30 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:42:30 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 12:52:30 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 12:52:30 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 13:23:45 localhost dovecot: Killed with signal 15
Aug 17 13:23:45 localhost dovecot: dovecot v1.1.16 starting up (core dumps disabled)
Aug 17 13:23:57 localhost postfix/postfix-script[3612]: stopping the Postfix mail system
Aug 17 13:23:57 localhost postfix/master[3356]: terminating on signal 15
Aug 17 13:23:58 localhost postfix/postfix-script[3663]: starting the Postfix mail system
Aug 17 13:23:58 localhost postfix/master[3664]: daemon started -- version 2.5.6, configuration /etc/postfix
Aug 17 13:24:13 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 13:24:13 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 13:37:40 localhost dovecot: pop3-login: Disconnected: Inactivity (no auth attempts): rip=192.168.1.113, lip=192.168.1.5, TLS handshaking
Aug 17 13:54:19 localhost postfix/postfix-script[3838]: stopping the Postfix mail system
Aug 17 13:54:19 localhost postfix/master[3664]: terminating on signal 15
Aug 17 13:54:19 localhost dovecot: Killed with signal 15
Aug 17 13:55:17 localhost dovecot: dovecot v1.1.16 starting up (core dumps disabled)
Aug 17 13:55:20 localhost postfix/postfix-script[1943]: starting the Postfix mail system
Aug 17 13:55:20 localhost postfix/master[1944]: daemon started -- version 2.5.6, configuration /etc/postfix
Aug 17 14:11:08 localhost postfix/postfix-script[2343]: stopping the Postfix mail system
Aug 17 14:11:08 localhost postfix/master[1944]: terminating on signal 15
Aug 17 14:11:09 localhost postfix/postfix-script[2394]: starting the Postfix mail system
Aug 17 14:11:09 localhost postfix/master[2395]: daemon started -- version 2.5.6, configuration /etc/postfix
Aug 17 14:11:19 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 14:11:19 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  mail
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  all
Aug 17 14:11:40 localhost postfix/smtpd[2402]: name_mask: all
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  poczta.localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  Postfix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  postfix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  postfix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  postdrop
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $myhostname, localhost.$mydomain, localhost, $mydomain -> poczta.localdomain, localhost.localdomain, localhost, localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $myhostname -> poczta.localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  /usr/libexec/postfix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  /var/lib/postfix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  /usr/sbin
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  /var/spool/postfix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  pid
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  all
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  double-bounce
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  nobody
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  hash:/etc/aliases
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  20090103
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  2.5.6
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  hash
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  deferred, defer
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $mydestination -> poczta.localdomain, localhost.localdomain, localhost, localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $relay_domains -> poczta.localdomain, localhost.localdomain, localhost, localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  TZ MAIL_CONFIG LANG
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  subnet
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  +=
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  -=+
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmq
pd_authorized_clients,relay_domains,smtpd_access_maps
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  bounce
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  cleanup
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  defer
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  pickup
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  qmgr
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  rewrite
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  showq
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  error
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  flush
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  verify
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  trace
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  2
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  3600s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  3600s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  5s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  5s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1000s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1000s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  10s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  10s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  500s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  500s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  18000s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  18000s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  127.0.0.0/8 192.168.1.5/24
Aug 17 14:11:40 localhost postfix/smtpd[2402]: inet_addr_local: configured 2 IPv4 addresses
Aug 17 14:11:40 localhost postfix/smtpd[2402]: inet_addr_local: configured 2 IPv6 addresses
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  550
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $myhostname ESMTP $mail_name ($mail_version) -> poczta.localdomain ESMTP Postfix (2.5.6)
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  resource, software
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  postmaster
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $virtual_maps -> 
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  hash:/etc/aliases
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand proxy:unix:passwd.byname $alias_maps -> proxy:unix:passwd.byname hash:/etc/aliases
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  noanonymous
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  private/auth
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  CONNECT GET POST
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  <>
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $double_bounce_sender -> double-bounce
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $authorized_verp_clients -> 
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $myhostname -> poczta.localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand ${smtpd_client_connection_limit_exceptions:$mynetworks} -> 127.0.0.0/8 192.168.1.5/24
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  permit_inet_interfaces
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $smtpd_sasl_security_options -> noanonymous
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $smtpd_tls_cert_file -> 
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $smtpd_tls_dcert_file -> 
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  medium
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  SSLv3, TLSv1
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  md5
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  dovecot
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  j {daemon_name} v
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  i {auth_type} {auth_authen} {auth_author} {mail_addr}
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  i {rcpt_addr}
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  i
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  i
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  i
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  2
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  tempfail
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $myhostname -> poczta.localdomain
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: expand $mail_name $mail_version -> Postfix 2.5.6
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  yes
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  yes
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  3s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  3s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  100s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1000s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  1000s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  3600s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  3600s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  30s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  30s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  30s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  30s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_eval: const  300s
Aug 17 14:11:40 localhost postfix/smtpd[2402]: process generation: 3 (3)
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: mynetworks ~? debug_peer_list
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: mynetworks ~? fast_flush_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: mynetworks ~? mynetworks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: relay_domains ~? debug_peer_list
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: relay_domains ~? fast_flush_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: relay_domains ~? mynetworks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: relay_domains ~? permit_mx_backup_networks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: relay_domains ~? qmqpd_authorized_clients
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: relay_domains ~? relay_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: permit_mx_backup_networks ~? debug_peer_list
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: permit_mx_backup_networks ~? fast_flush_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: permit_mx_backup_networks ~? mynetworks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: permit_mx_backup_networks ~? permit_mx_backup_networks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: connect to subsystem private/proxymap
Aug 17 14:11:40 localhost postfix/smtpd[2402]: send attr request = open
Aug 17 14:11:40 localhost postfix/smtpd[2402]: send attr table = unix:passwd.byname
Aug 17 14:11:40 localhost postfix/smtpd[2402]: send attr flags = 16448
Aug 17 14:11:40 localhost postfix/smtpd[2402]: private/proxymap socket: wanted attribute: status
Aug 17 14:11:40 localhost postfix/smtpd[2402]: input attribute name: status
Aug 17 14:11:40 localhost postfix/smtpd[2402]: input attribute value: 0
Aug 17 14:11:40 localhost postfix/smtpd[2402]: private/proxymap socket: wanted attribute: flags
Aug 17 14:11:40 localhost postfix/smtpd[2402]: input attribute name: flags
Aug 17 14:11:40 localhost postfix/smtpd[2402]: input attribute value: 16464
Aug 17 14:11:40 localhost postfix/smtpd[2402]: private/proxymap socket: wanted attribute: (list terminator)
Aug 17 14:11:40 localhost postfix/smtpd[2402]: input attribute name: (end)
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_proxy_open: connect to map=unix:passwd.byname status=0 server_flags=fixed|lock|fold_fix
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_open: proxy:unix:passwd.byname
Aug 17 14:11:40 localhost postfix/smtpd[2402]: Compiled against Berkeley DB: 4.7.25?
Aug 17 14:11:40 localhost postfix/smtpd[2402]: Run-time linked against Berkeley DB: 4.7.25?
Aug 17 14:11:40 localhost postfix/smtpd[2402]: dict_open: hash:/etc/aliases
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? debug_peer_list
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? fast_flush_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? mynetworks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? permit_mx_backup_networks
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? qmqpd_authorized_clients
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? relay_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: smtpd_access_maps ~? smtpd_access_maps
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: fast_flush_domains ~? debug_peer_list
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_string: fast_flush_domains ~? fast_flush_domains
Aug 17 14:11:40 localhost postfix/smtpd[2402]: auto_clnt_create: transport=local endpoint=private/anvil
Aug 17 14:11:40 localhost postfix/smtpd[2402]: connection established
Aug 17 14:11:40 localhost postfix/smtpd[2402]: master_notify: status 0
Aug 17 14:11:40 localhost postfix/smtpd[2402]: name_mask: resource
Aug 17 14:11:40 localhost postfix/smtpd[2402]: name_mask: software
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_create: SASL service=smtp, realm=(null)
Aug 17 14:11:40 localhost postfix/smtpd[2402]: name_mask: noanonymous
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_connect: Connecting
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_connect: auth reply: MECH?PLAIN?plaintext
Aug 17 14:11:40 localhost postfix/smtpd[2402]: name_mask: plaintext
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_connect: auth reply: VERSION?1?0
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_connect: auth reply: SPID?1879
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_connect: auth reply: CUID?8
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_connect: auth reply: DONE
Aug 17 14:11:40 localhost postfix/smtpd[2402]: xsasl_dovecot_server_mech_filter: keep mechanism: PLAIN
Aug 17 14:11:40 localhost postfix/smtpd[2402]: connect from informatyk.int.oum.pl[192.168.1.113]
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_list_match: informatyk.int.oum.pl: no match
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_list_match: 192.168.1.113: no match
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_list_match: informatyk.int.oum.pl: no match
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_list_match: 192.168.1.113: no match
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_hostname: informatyk.int.oum.pl ~? 127.0.0.0/8
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_hostaddr: 192.168.1.113 ~? 127.0.0.0/8
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_hostname: informatyk.int.oum.pl ~? 192.168.1.5/24
Aug 17 14:11:40 localhost postfix/smtpd[2402]: match_hostaddr: 192.168.1.113 ~? 192.168.1.5/24
Aug 17 14:11:40 localhost postfix/smtpd[2402]: fatal: non-null host address bits in "192.168.1.5/24", perhaps you should use "192.168.1.0/24" instead
Aug 17 14:11:41 localhost postfix/master[2395]: warning: process /usr/libexec/postfix/smtpd pid 2402 exit status 1
Aug 17 14:11:41 localhost postfix/master[2395]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling

 

Z logów wynika, że chyba mam złą adresacje, zamiast 192.168.1.5 ma być 192.168.1.0 i

 

Aug 17 14:11:41 localhost postfix/master[2395]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling

 

oznacza, że mam błąd przy uruchamianiu smtpd lub nie mam wcale pliku?

 

Zmieniłem w main.cf parametr :

 

mynetworks = 127.0.0.0/8 192.168.1.5/24

 

na

 

mynetworks = 127.0.0.0/8 192.168.1.0/24

 

i działa wysyłanie, ale nie dochodzą maile. Oto log:

 

Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  mail
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  all
Aug 17 14:39:49 localhost postfix/smtpd[2326]: name_mask: all
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  Postfix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  postfix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  postfix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  postdrop
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $myhostname, localhost.$mydomain, localhost, $mydomain -> poczta.localdomain, localhost.localdomain, localhost, localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $myhostname -> poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  /usr/libexec/postfix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  /var/lib/postfix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  /usr/sbin
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  /var/spool/postfix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  pid
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  all
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  double-bounce
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  nobody
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  hash:/etc/aliases
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  20090103
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  2.5.6
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  hash
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  deferred, defer
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $mydestination -> poczta.localdomain, localhost.localdomain, localhost, localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $relay_domains -> poczta.localdomain, localhost.localdomain, localhost, localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  TZ MAIL_CONFIG LANG
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  subnet
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  +=
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  -=+
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmq
pd_authorized_clients,relay_domains,smtpd_access_maps
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  bounce
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  cleanup
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  defer
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  pickup
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  qmgr
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  rewrite
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  showq
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  error
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  flush
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  verify
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  trace
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  2
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  3600s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  3600s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  5s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  5s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1000s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1000s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  10s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  10s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  500s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  500s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  18000s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  18000s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  127.0.0.0/8 192.168.1.0/24
Aug 17 14:39:49 localhost postfix/smtpd[2326]: inet_addr_local: configured 2 IPv4 addresses
Aug 17 14:39:49 localhost postfix/smtpd[2326]: inet_addr_local: configured 2 IPv6 addresses
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  550
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $myhostname ESMTP $mail_name ($mail_version) -> poczta.localdomain ESMTP Postfix (2.5.6)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  resource, software
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  postmaster
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $virtual_maps -> 
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  hash:/etc/aliases
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand proxy:unix:passwd.byname $alias_maps -> proxy:unix:passwd.byname hash:/etc/aliases
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  noanonymous
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  private/auth
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  CONNECT GET POST
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  <>
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $double_bounce_sender -> double-bounce
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $authorized_verp_clients -> 
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $myhostname -> poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand ${smtpd_client_connection_limit_exceptions:$mynetworks} -> 127.0.0.0/8 192.168.1.0/24
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  permit_inet_interfaces
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $smtpd_sasl_security_options -> noanonymous
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $smtpd_tls_cert_file -> 
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $smtpd_tls_dcert_file -> 
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  medium
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  SSLv3, TLSv1
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  md5
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  dovecot
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  j {daemon_name} v
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  i {auth_type} {auth_authen} {auth_author} {mail_addr}
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  i {rcpt_addr}
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  i
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  i
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  i
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  2
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  tempfail
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $myhostname -> poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: expand $mail_name $mail_version -> Postfix 2.5.6
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  yes
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  yes
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  3s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  3s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  100s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1000s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  1000s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  3600s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  3600s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  30s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  30s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  30s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  30s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_eval: const  300s
Aug 17 14:39:49 localhost postfix/smtpd[2326]: process generation: 13 (13)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: mynetworks ~? debug_peer_list
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: mynetworks ~? fast_flush_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: mynetworks ~? mynetworks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: relay_domains ~? debug_peer_list
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: relay_domains ~? fast_flush_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: relay_domains ~? mynetworks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: relay_domains ~? permit_mx_backup_networks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: relay_domains ~? qmqpd_authorized_clients
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: relay_domains ~? relay_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: permit_mx_backup_networks ~? debug_peer_list
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: permit_mx_backup_networks ~? fast_flush_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: permit_mx_backup_networks ~? mynetworks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: permit_mx_backup_networks ~? permit_mx_backup_networks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: connect to subsystem private/proxymap
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr request = open
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr table = unix:passwd.byname
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr flags = 16448
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/proxymap socket: wanted attribute: status
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: status
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 0
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/proxymap socket: wanted attribute: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 16464
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/proxymap socket: wanted attribute: (list terminator)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_proxy_open: connect to map=unix:passwd.byname status=0 server_flags=fixed|lock|fold_fix
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_open: proxy:unix:passwd.byname
Aug 17 14:39:49 localhost postfix/smtpd[2326]: Compiled against Berkeley DB: 4.7.25?
Aug 17 14:39:49 localhost postfix/smtpd[2326]: Run-time linked against Berkeley DB: 4.7.25?
Aug 17 14:39:49 localhost postfix/smtpd[2326]: dict_open: hash:/etc/aliases
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? debug_peer_list
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? fast_flush_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? mynetworks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? permit_mx_backup_networks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? qmqpd_authorized_clients
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? relay_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: smtpd_access_maps ~? smtpd_access_maps
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: fast_flush_domains ~? debug_peer_list
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: fast_flush_domains ~? fast_flush_domains
Aug 17 14:39:49 localhost postfix/smtpd[2326]: auto_clnt_create: transport=local endpoint=private/anvil
Aug 17 14:39:49 localhost postfix/smtpd[2326]: connection established
Aug 17 14:39:49 localhost postfix/smtpd[2326]: master_notify: status 0
Aug 17 14:39:49 localhost postfix/smtpd[2326]: name_mask: resource
Aug 17 14:39:49 localhost postfix/smtpd[2326]: name_mask: software
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_create: SASL service=smtp, realm=(null)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: name_mask: noanonymous
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_connect: Connecting
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_connect: auth reply: MECH?PLAIN?plaintext
Aug 17 14:39:49 localhost postfix/smtpd[2326]: name_mask: plaintext
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_connect: auth reply: VERSION?1?0
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_connect: auth reply: SPID?1880
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_connect: auth reply: CUID?11
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_connect: auth reply: DONE
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_mech_filter: keep mechanism: PLAIN
Aug 17 14:39:49 localhost postfix/smtpd[2326]: connect from informatyk.int.oum.pl[192.168.1.113]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: informatyk.int.oum.pl: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: 192.168.1.113: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: informatyk.int.oum.pl: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: 192.168.1.113: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 127.0.0.0/8
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 127.0.0.0/8
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 192.168.1.0/24
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 192.168.1.0/24
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 220 poczta.localdomain ESMTP Postfix (2.5.6)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: EHLO [127.0.0.1]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-PIPELINING
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-SIZE 10240000
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-VRFY
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-ETRN
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-AUTH PLAIN
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: informatyk.int.oum.pl: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: 192.168.1.113: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-AUTH=PLAIN
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-ENHANCEDSTATUSCODES
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250-8BITMIME
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 DSN
Aug 17 14:39:49 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: AUTH PLAIN AGNnbGljegBjZ2xpY3o=
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_server_first: sasl_method PLAIN, init_response AGNnbGljegBjZ2xpY3o=
Aug 17 14:39:49 localhost postfix/smtpd[2326]: xsasl_dovecot_handle_reply: auth reply: OK?1?user=cglicz
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 235 2.7.0 Authentication successful
Aug 17 14:39:49 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: MAIL FROM:<[email protected]> SIZE=419
Aug 17 14:39:49 localhost postfix/smtpd[2326]: extract_addr: input: <[email protected]>
Aug 17 14:39:49 localhost postfix/smtpd[2326]: smtpd_check_addr: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: connect to subsystem private/rewrite
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr request = rewrite
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr rule = local
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr address = [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 0
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: address
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: address
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: (list terminator)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: rewrite_clnt: local: [email protected] -> [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr request = resolve
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr sender = 
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr address = [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 0
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: transport
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: transport
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: smtp
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: nexthop
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: nexthop
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: poczta.int.oum.pl
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: recipient
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: recipient
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 4096
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: (list terminator)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: resolve_clnt: `' -> `[email protected]' -> transp=`smtp' host=`poczta.int.oum.pl' rcpt=`[email protected]' flags= class=default
Aug 17 14:39:49 localhost postfix/smtpd[2326]: ctable_locate: install entry key [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: extract_addr: in: <[email protected]>, result: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: fsspace: .: block size 4096, blocks free 3016308
Aug 17 14:39:49 localhost postfix/smtpd[2326]: smtpd_check_queue: blocks 4096 avail 3016308 min_free 0 msg_size_limit 10240000
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.1.0 Ok
Aug 17 14:39:49 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: RCPT TO:<[email protected]>
Aug 17 14:39:49 localhost postfix/smtpd[2326]: extract_addr: input: <[email protected]>
Aug 17 14:39:49 localhost postfix/smtpd[2326]: smtpd_check_addr: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: ctable_locate: leave existing entry key [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: extract_addr: in: <[email protected]>, result: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr request = rewrite
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr rule = local
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr address = double-bounce
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: flags
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 0
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: address
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: address
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: private/rewrite socket: wanted attribute: (list terminator)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: rewrite_clnt: local: double-bounce -> [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: >>> START Recipient address RESTRICTIONS <<<
Aug 17 14:39:49 localhost postfix/smtpd[2326]: generic_checks: name=permit_mynetworks
Aug 17 14:39:49 localhost postfix/smtpd[2326]: permit_mynetworks: informatyk.int.oum.pl 192.168.1.113
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 127.0.0.0/8
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 127.0.0.0/8
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 192.168.1.0/24
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 192.168.1.0/24
Aug 17 14:39:49 localhost postfix/smtpd[2326]: generic_checks: name=permit_mynetworks status=1
Aug 17 14:39:49 localhost postfix/smtpd[2326]: >>> CHECKING RECIPIENT MAPS <<<
Aug 17 14:39:49 localhost postfix/smtpd[2326]: ctable_locate: leave existing entry key [email protected]
Aug 17 14:39:49 localhost postfix/smtpd[2326]: maps_find: recipient_canonical_maps: [email protected]: not found
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: poczta.int.oum.pl: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: maps_find: recipient_canonical_maps: @poczta.int.oum.pl: not found
Aug 17 14:39:49 localhost postfix/smtpd[2326]: mail_addr_find: [email protected] -> (not found)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: maps_find: canonical_maps: [email protected]: not found
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: poczta.int.oum.pl: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: maps_find: canonical_maps: @poczta.int.oum.pl: not found
Aug 17 14:39:49 localhost postfix/smtpd[2326]: mail_addr_find: [email protected] -> (not found)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: maps_find: virtual_alias_maps: [email protected]: not found
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? poczta.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost.localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localdomain
Aug 17 14:39:49 localhost postfix/smtpd[2326]: match_list_match: poczta.int.oum.pl: no match
Aug 17 14:39:49 localhost postfix/smtpd[2326]: maps_find: virtual_alias_maps: @poczta.int.oum.pl: not found
Aug 17 14:39:49 localhost postfix/smtpd[2326]: mail_addr_find: [email protected] -> (not found)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: smtpd_check_rewrite: trying: permit_inet_interfaces
Aug 17 14:39:49 localhost postfix/smtpd[2326]: permit_inet_interfaces: informatyk.int.oum.pl 192.168.1.113
Aug 17 14:39:49 localhost postfix/smtpd[2326]: before input_transp_cleanup: cleanup flags = enable_header_body_filter enable_automatic_bcc enable_address_mapping enable_milters
Aug 17 14:39:49 localhost postfix/smtpd[2326]: after input_transp_cleanup: cleanup flags = enable_header_body_filter enable_automatic_bcc enable_address_mapping
Aug 17 14:39:49 localhost postfix/smtpd[2326]: connect to subsystem public/cleanup
Aug 17 14:39:49 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: queue_id
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: queue_id
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute value: 93884B6053
Aug 17 14:39:49 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: (list terminator)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:49 localhost postfix/smtpd[2326]: send attr flags = 178
Aug 17 14:39:49 localhost postfix/smtpd[2326]: 93884B6053: client=informatyk.int.oum.pl[192.168.1.113], sasl_method=PLAIN, sasl_username=cglicz
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.1.5 Ok
Aug 17 14:39:49 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: RSET
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.0.0 Ok
Aug 17 14:39:49 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: RSET
Aug 17 14:39:49 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.0.0 Ok
Aug 17 14:39:50 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: MAIL FROM:<[email protected]> SIZE=419
Aug 17 14:39:50 localhost postfix/smtpd[2326]: extract_addr: input: <[email protected]>
Aug 17 14:39:50 localhost postfix/smtpd[2326]: smtpd_check_addr: [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: ctable_locate: leave existing entry key [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: extract_addr: in: <[email protected]>, result: [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: fsspace: .: block size 4096, blocks free 3016307
Aug 17 14:39:50 localhost postfix/smtpd[2326]: smtpd_check_queue: blocks 4096 avail 3016307 min_free 0 msg_size_limit 10240000
Aug 17 14:39:50 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.1.0 Ok
Aug 17 14:39:50 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: RCPT TO:<[email protected]>
Aug 17 14:39:50 localhost postfix/smtpd[2326]: extract_addr: input: <[email protected]>
Aug 17 14:39:50 localhost postfix/smtpd[2326]: smtpd_check_addr: [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: ctable_locate: leave existing entry key [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: extract_addr: in: <[email protected]>, result: [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: >>> START Recipient address RESTRICTIONS <<<
Aug 17 14:39:50 localhost postfix/smtpd[2326]: generic_checks: name=permit_mynetworks
Aug 17 14:39:50 localhost postfix/smtpd[2326]: permit_mynetworks: informatyk.int.oum.pl 192.168.1.113
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 127.0.0.0/8
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 127.0.0.0/8
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 192.168.1.0/24
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 192.168.1.0/24
Aug 17 14:39:50 localhost postfix/smtpd[2326]: generic_checks: name=permit_mynetworks status=1
Aug 17 14:39:50 localhost postfix/smtpd[2326]: >>> CHECKING RECIPIENT MAPS <<<
Aug 17 14:39:50 localhost postfix/smtpd[2326]: ctable_locate: leave existing entry key [email protected]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: maps_find: recipient_canonical_maps: [email protected]: not found
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? poczta.localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost.localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_list_match: poczta.int.oum.pl: no match
Aug 17 14:39:50 localhost postfix/smtpd[2326]: maps_find: recipient_canonical_maps: @poczta.int.oum.pl: not found
Aug 17 14:39:50 localhost postfix/smtpd[2326]: mail_addr_find: [email protected] -> (not found)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: maps_find: canonical_maps: [email protected]: not found
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? poczta.localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost.localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_list_match: poczta.int.oum.pl: no match
Aug 17 14:39:50 localhost postfix/smtpd[2326]: maps_find: canonical_maps: @poczta.int.oum.pl: not found
Aug 17 14:39:50 localhost postfix/smtpd[2326]: mail_addr_find: [email protected] -> (not found)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: maps_find: virtual_alias_maps: [email protected]: not found
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? poczta.localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost.localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localhost
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_string: poczta.int.oum.pl ~? localdomain
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_list_match: poczta.int.oum.pl: no match
Aug 17 14:39:50 localhost postfix/smtpd[2326]: maps_find: virtual_alias_maps: @poczta.int.oum.pl: not found
Aug 17 14:39:50 localhost postfix/smtpd[2326]: mail_addr_find: [email protected] -> (not found)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: smtpd_check_rewrite: trying: permit_inet_interfaces
Aug 17 14:39:50 localhost postfix/smtpd[2326]: permit_inet_interfaces: informatyk.int.oum.pl 192.168.1.113
Aug 17 14:39:50 localhost postfix/smtpd[2326]: before input_transp_cleanup: cleanup flags = enable_header_body_filter enable_automatic_bcc enable_address_mapping enable_milters
Aug 17 14:39:50 localhost postfix/smtpd[2326]: after input_transp_cleanup: cleanup flags = enable_header_body_filter enable_automatic_bcc enable_address_mapping
Aug 17 14:39:50 localhost postfix/smtpd[2326]: connect to subsystem public/cleanup
Aug 17 14:39:50 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: queue_id
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute name: queue_id
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute value: 0DD36B6053
Aug 17 14:39:50 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: (list terminator)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: send attr flags = 178
Aug 17 14:39:50 localhost postfix/smtpd[2326]: 0DD36B6053: client=informatyk.int.oum.pl[192.168.1.113], sasl_method=PLAIN, sasl_username=cglicz
Aug 17 14:39:50 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.1.5 Ok
Aug 17 14:39:50 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: DATA
Aug 17 14:39:50 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 354 End data with <CR><LF>.<CR><LF>
Aug 17 14:39:50 localhost postfix/cleanup[2329]: 0DD36B6053: message-id=<[email protected]>
Aug 17 14:39:50 localhost postfix/qmgr[1956]: 0DD36B6053: from=<[email protected]>, size=622, nrcpt=1 (queue active)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: status
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute name: status
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute value: 0
Aug 17 14:39:50 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: reason
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute name: reason
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute value: (end)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: public/cleanup socket: wanted attribute: (list terminator)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: input attribute name: (end)
Aug 17 14:39:50 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 250 2.0.0 Ok: queued as 0DD36B6053
Aug 17 14:39:50 localhost postfix/smtpd[2326]: < informatyk.int.oum.pl[192.168.1.113]: QUIT
Aug 17 14:39:50 localhost postfix/smtpd[2326]: > informatyk.int.oum.pl[192.168.1.113]: 221 2.0.0 Bye
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 127.0.0.0/8
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 127.0.0.0/8
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostname: informatyk.int.oum.pl ~? 192.168.1.0/24
Aug 17 14:39:50 localhost postfix/smtpd[2326]: match_hostaddr: 192.168.1.113 ~? 192.168.1.0/24
Aug 17 14:39:50 localhost postfix/smtpd[2326]: disconnect from informatyk.int.oum.pl[192.168.1.113]
Aug 17 14:39:50 localhost postfix/smtpd[2326]: master_notify: status 1
Aug 17 14:39:50 localhost postfix/smtpd[2326]: connection closed
Aug 17 14:39:50 localhost postfix/smtp[2330]: 0DD36B6053: to=<[email protected]>, relay=none, delay=0.09, delays=0.06/0.03/0/0, dsn=5.4.6, status=bounced (mail for poczta.int.oum.pl loops back to myself)
Aug 17 14:39:50 localhost postfix/cleanup[2329]: 282EEB6057: message-id=<[email protected]>
Aug 17 14:39:50 localhost postfix/qmgr[1956]: 282EEB6057: from=<>, size=2456, nrcpt=1 (queue active)
Aug 17 14:39:50 localhost postfix/bounce[2331]: 0DD36B6053: sender non-delivery notification: 282EEB6057
Aug 17 14:39:50 localhost postfix/qmgr[1956]: 0DD36B6053: removed
Aug 17 14:39:50 localhost postfix/smtp[2330]: 282EEB6057: to=<[email protected]>, relay=none, delay=0.01, delays=0.01/0/0/0, dsn=5.4.6, status=bounced (mail for poczta.int.oum.pl loops back to myself)
Aug 17 14:39:50 localhost postfix/qmgr[1956]: 282EEB6057: removed
Aug 17 14:39:54 localhost postfix/smtpd[2326]: proxymap stream disconnect
Aug 17 14:39:54 localhost postfix/smtpd[2326]: rewrite stream disconnect
Aug 17 14:40:52 localhost dovecot: pop3-login: Login: user=<cglicz>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.5, TLS
Aug 17 14:40:52 localhost dovecot: POP3(cglicz): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=910
Aug 17 14:41:30 localhost postfix/smtpd[2326]: idle timeout -- exiting

 

Czemu?

[ronon]

W logach wynika, że poczta:

 

 

Aug 17 14:39:50 localhost postfix/smtp[2330]: 0DD36B6053: to=<[email protected]>, relay=none, delay=0.09, delays=0.06/0.03/0/0, dsn=5.4.6, status=bounced (mail for poczta.int.oum.pl loops back to myself)

Aug 17 14:39:50 localhost postfix/cleanup[2329]: 282EEB6057: message-id=<[email protected]>

Aug 17 14:39:50 localhost postfix/qmgr[1956]: 282EEB6057: from=<>, size=2456, nrcpt=1 (queue active)

Aug 17 14:39:50 localhost postfix/bounce[2331]: 0DD36B6053: sender non-delivery notification: 282EEB6057

Aug 17 14:39:50 localhost postfix/qmgr[1956]: 0DD36B6053: removed

Aug 17 14:39:50 localhost postfix/smtp[2330]: 282EEB6057: to=<[email protected]>, relay=none, delay=0.01, delays=0.01/0/0/0, dsn=5.4.6, status=bounced (mail for poczta.int.oum.pl loops back to myself)

Aug 17 14:39:50 localhost postfix/qmgr[1956]: 282EEB6057: removed

 

jest kasowana, gdyż wiadomość nie doszła na wskazany adres.

 

Czy może mi ktoś powiedzieć dlaczego? Co jest powodem,że wiadomość nie można wysłać do każdego odbiorcy w sieci 192.168.1.0?

[qmic]

Zmień linię

mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain

 

dodaj tu może na końcu:

mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, mojadomena.com.pl

Tylko oczywiście zmień mojadomena.com.pl na swoją której używasz.

 

Masz nieprawidłowo ustawioną zmienną hostname i domainname w systemie.

Poza tym wklejając moją poradę dodałeś za dużo:

smtp inet n - n - - smtpd -v

Usuń te znaczniki w nawiasach

Po operacji zawsze trzeba zrestartować postfix`a.

 

Poza tym do testów wyłącz dovecot`a (sprawdzaj czy poczta doszła w katalogach użytkownika, tylko Ci zaśmieca logi. Dostarczanie poczty to oddzielna sprawa z odbieraniem (postfix służy do dostarczania - SMTP a dovecot do odbierania - IMAP,POP)

[@WalDo]

Off Topic

@ranon - bądź łaskaw te swoje tasiemcowe listingi wstawiać w odpowiednich znacznikach. Sprawdź, to może uda Ci się zauważyć pewną różnicę między znacznikami code i codebox.

Warto też przed wklejeniem chwilę pomyśleć czy to co się wkleja jest rzeczywiście konieczne i niesie jakąś wartościową informację. Np. komentarze w plikach konfiguracyjnych taką wartościową informacja nie są. Ilość zazwyczaj nie przechodzi w jakość.

I nie pisz postów pod własnymi.

[ronon]

Zmień linię

mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain

 

dodaj tu może na końcu:

mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, mojadomena.com.pl

Tylko oczywiście zmień mojadomena.com.pl na swoją której używasz.

 

Masz nieprawidłowo ustawioną zmienną hostname i domainname w systemie.

Poza tym wklejając moją poradę dodałeś za dużo:

smtp inet n - n - - smtpd -v

Usuń te znaczniki w nawiasach

Po operacji zawsze trzeba zrestartować postfix`a.

 

Poza tym do testów wyłącz dovecot`a (sprawdzaj czy poczta doszła w katalogach użytkownika, tylko Ci zaśmieca logi. Dostarczanie poczty to oddzielna sprawa z odbieraniem (postfix służy do dostarczania - SMTP a dovecot do odbierania - IMAP,POP)

 

 

Dzięki. Już poczta działa, jest super.

 

Znalazłem linijkę :

 

smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

 

która była odpowiedzialna za niewysyłanie maili.

 

Wielkie dzieki qmic

 

Mam pytanie: Używamy klienta poczty Mozzila Thunderbird. Podczas połaczenia się z postfixem wywala komunikat:

 

Błąd zabezpieczeń: Niezgodność nazwy domeny

Podjęto próbę połączenia się z "poczta.int.oum.pl", jednakże przedstawiony przez stronę certyfikat należy do "imap.exlample.com". (...)

 

Czy to jest generowane z davecot czy z postfixa? Jak to usunąć?

 

 

[qmic]

Czy to jest generowane z davecot czy z postfixa? Jak to usunąć?

 

Jak odbieranie to przez dovecota oczywiście jak przy wysyłaniu to postfix. Jeśli robisz zabezpieczenia to zrób na jedno i drugie.

Wygeneruj nowe klucze i podmień w miejsce tych które są konfiguracji dovecot`a, w redhatopodobnych dystrybucjach jest od tego polecenie genkey.

 

[ronon]

Jak odbieranie to przez dovecota oczywiście jak przy wysyłaniu to postfix. Jeśli robisz zabezpieczenia to zrób na jedno i drugie.

Wygeneruj nowe klucze i podmień w miejsce tych które są konfiguracji dovecot`a, w redhatopodobnych dystrybucjach jest od tego polecenie genkey.

 

Dzięki za informacje.

 

Czy możesz mi podać dokładne polecenie jak wygenerować nowe klucze i je podmienić. Jestem w tej sprawie "zielony"

 

Jak mam wygenerować klucz davecot.pem?

 

Już stosowałem wszystkie opcje i zawsze mi generował glucz davecot.key?

[qmic]

Jak mam wygenerować klucz davecot.pem?

 

Już stosowałem wszystkie opcje i zawsze mi generował glucz davecot.key?

 

Nazwa pliku to raczej sprawa drugorzędna

 

Jaką masz dystrybucję i w jakiej wersji ?

[ronon]

Nazwa pliku to raczej sprawa drugorzędna

 

Jaką masz dystrybucję i w jakiej wersji ?

 

Już sobie poradziłem. Postfix działa z Dovecot + TLS.

 

Mam pytanie:

 

Jak można z postfixa wyłączyć opcje smtp bez szyfrowania?

 

Teraz działa bez szyfrowania i z szyfrowaniem TLS. Chcę żeby działało tylko z szyfrowaniem TLS i nie wiem jak to zrobic.

 

Już sobie poradziłem.

 

Jaki antywirus do postfixa polecacie?

[qmic]

Już sobie poradziłem. Postfix działa z Dovecot + TLS.

 

Mam pytanie:

 

Jak można z postfixa wyłączyć opcje smtp bez szyfrowania?

 

Teraz działa bez szyfrowania i z szyfrowaniem TLS. Chcę żeby działało tylko z szyfrowaniem TLS i nie wiem jak to zrobic.

 

Już sobie poradziłem.

 

Jaki antywirus do postfixa polecacie?

 

Clamav wystarcza, jeszcze mi nigdy nic nie przepuścił.

[ronon]

Clamav wystarcza, jeszcze mi nigdy nic nie przepuścił.

 

 

Możesz mi podać jakiś link co do konfiguracji z postfixem?

 

Szukałem, ale nie znalazlem 100 % opisu.

[qmic]

Możesz mi podać jakiś link co do konfiguracji z postfixem?

 

Szukałem, ale nie znalazlem 100 % opisu.

 

 

na www.howtoforge.com jest mnóstwo opisów