Skocz do zawartości

Kamera Syntek 2.0Mpixel Web Cam - Asus Z96J, Z96S, S96S


deepblu

Rekomendowane odpowiedzi

Mam problem z kamerą.

lsusb:

Bus 002 Device 003: ID 174f:6a51 Syntek 2.0MPixel Web Cam - Asus Z96J, Z96S, S96S

 

Szukam w google:

Syntek 2.0MPixel Web Cam - Asus Z96J, Z96S, S96S fedora driver i nic nie potrafię znaleźć.

 

Ktoś potrafi mi pomóc bo moja kamera nie działa (np. cheese jej nie wykrywa, vlc też nie) ?

Odnośnik do komentarza
Udostępnij na innych stronach

Zaraz po podlaczeniu kamery sprawdz czy w logach nie pojawily sie bledy.

Mozesz to zrobic przez

dmesg | tail

albo jeszcze lepiej uruchom (jako root) w konsoli wyswietlanie logu systemowego na biezaco

tail -f /var/log/messages

i podlacz kamere - na konsoli bede sie wypisywaly komunikaty zwiazane z dzialaniami podjetymi przez system w celu zaladowania odpowiednich modulów.

Podejrzewam, ze moze brakowac firmware'u.

Jaka wersja Fedory i jadra?

Odnośnik do komentarza
Udostępnij na innych stronach

uname -a

Linux gazela 3.4.6-2.fc17.x86_64 #1 SMP Thu Jul 19 22:54:16 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

 

cat /etc/fedora-release

Fedora release 17 (Beefy Miracle)

 

Kamera jest juz w laptopie.

 

Próbowalem szukac w dmesg weglug : Asus, Syntek, Z96, Cam, ale nic nie potrafie znalezc.

 

dmesg:

 

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.4.6-2.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Thu Jul 19 22:54:16 UTC 2012

[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.6-2.fc17.x86_64 root=UUID=b3d36e64-ddad-410b-80ee-2f56752b4e07 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=latarcyrheb-sun16 KEYTABLE=pl2 rd.luks=0 LANG=en_US.UTF-8 rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)

[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)

[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)

[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007fff0000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI present.

[ 0.000000] DMI: To Be Filled By O.E.M. S96S/S96S, BIOS 0602 12/21/2007

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[ 0.000000] No AGP bridge found

[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-DFFFF uncachable

[ 0.000000] E0000-E3FFF write-protect

[ 0.000000] E4000-EFFFF write-through

[ 0.000000] F0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask F80000000 write-back

[ 0.000000] 1 disabled

[ 0.000000] 2 disabled

[ 0.000000] 3 disabled

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780

[ 0.000000] initial memory mapped : 0 - 20000000

[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480

[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff90000

[ 0.000000] 0000000000 - 007fe00000 page 2M

[ 0.000000] 007fe00000 - 007ff90000 page 4k

[ 0.000000] kernel direct mapping tables up to 7ff90000 @ 1fffc000-20000000

[ 0.000000] RAMDISK: 35e30000 - 36f10000

[ 0.000000] ACPI: RSDP 00000000000fb420 00014 (v00 ACPIAM)

[ 0.000000] ACPI: RSDT 000000007ff90000 0003C (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 12000721 MSFT 00000097)

[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 AMITW OEMFACP 12000721 MSFT 00000097)

[ 0.000000] ACPI Warning: Invalid length for PmTimerBlock: 24, using default 32 (20120320/tbfadt-629)

[ 0.000000] ACPI: DSDT 000000007ff905b0 06885 (v01 A0791 A0791000 00000000 INTL 20060113)

[ 0.000000] ACPI: FACS 000000007ff9e000 00040

[ 0.000000] ACPI: APIC 000000007ff90390 0005C (v01 AMITW OEMAPIC 12000721 MSFT 00000097)

[ 0.000000] ACPI: MCFG 000000007ff903f0 0003C (v01 AMITW OEMMCFG 12000721 MSFT 00000097)

[ 0.000000] ACPI: SLIC 000000007ff90430 00176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 12000721 MSFT 00000097)

[ 0.000000] ACPI: OEMB 000000007ff9e040 00061 (v01 AMITW AMI_OEM 12000721 MSFT 00000097)

[ 0.000000] ACPI: HPET 000000007ff96e40 00038 (v01 AMITW OEMHPET 12000721 MSFT 00000097)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-000000007ff90000

[ 0.000000] Initmem setup node 0 0000000000000000-000000007ff90000

[ 0.000000] NODE_DATA [000000007ff7c000 - 000000007ff8ffff]

[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] DMA32 0x00001000 -> 0x00100000

[ 0.000000] Normal empty

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] Early memory PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009a

[ 0.000000] 0: 0x00000100 -> 0x0007ff90

[ 0.000000] On node 0 totalpages: 524058

[ 0.000000] DMA zone: 64 pages used for memmap

[ 0.000000] DMA zone: 5 pages reserved

[ 0.000000] DMA zone: 3909 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 8127 pages used for memmap

[ 0.000000] DMA32 zone: 511953 pages, LIFO batch:31

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000

[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000

[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83008 r8192 d23488 u1048576

[ 0.000000] pcpu-alloc: s83008 r8192 d23488 u1048576 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515862

[ 0.000000] Policy zone: DMA32

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.6-2.fc17.x86_64 root=UUID=b3d36e64-ddad-410b-80ee-2f56752b4e07 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=latarcyrheb-sun16 KEYTABLE=pl2 rd.luks=0 LANG=en_US.UTF-8 rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] Checking aperture...

[ 0.000000] No AGP bridge found

[ 0.000000] Memory: 2029772k/2096704k available (6147k kernel code, 472k absent, 66460k reserved, 7026k data, 1000k init)

[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] NR_IRQS:8448 nr_irqs:512 16

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] allocated 8388608 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] hpet clockevent registered

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 1994.954 MHz processor.

[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.90 BogoMIPS (lpj=1994954)

[ 0.001010] pid_max: default: 32768 minimum: 301

[ 0.001044] Security Framework initialized

[ 0.001061] SELinux: Initializing.

[ 0.001072] SELinux: Starting in permissive mode

[ 0.001374] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.003071] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.003829] Mount-cache hash table entries: 256

[ 0.004124] Initializing cgroup subsys cpuacct

[ 0.004129] Initializing cgroup subsys memory

[ 0.004146] Initializing cgroup subsys devices

[ 0.004149] Initializing cgroup subsys freezer

[ 0.004151] Initializing cgroup subsys net_cls

[ 0.004154] Initializing cgroup subsys blkio

[ 0.004163] Initializing cgroup subsys perf_event

[ 0.004198] CPU: Physical Processor ID: 0

[ 0.004200] CPU: Processor Core ID: 0

[ 0.004203] mce: CPU supports 6 MCE banks

[ 0.004213] CPU0: Thermal monitoring enabled (TM2)

[ 0.004218] using mwait in idle threads.

[ 0.005858] ACPI: Core revision 20120320

[ 0.009009] ftrace: allocating 22861 entries in 90 pages

[ 0.016472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.026914] CPU0: Intel® Core2 Duo CPU T5750 @ 2.00GHz stepping 0d

[ 0.026998] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms

[ 0.026998] APIC delta adjusted to PM-Timer: 1039061 (1246860)

[ 0.026998] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.

[ 0.026998] PEBS disabled due to CPU errata.

[ 0.026998] ... version: 2

[ 0.026998] ... bit width: 40

[ 0.026998] ... generic registers: 2

[ 0.026998] ... value mask: 000000ffffffffff

[ 0.026998] ... max period: 000000007fffffff

[ 0.026998] ... fixed-purpose events: 3

[ 0.026998] ... event mask: 0000000700000003

[ 0.026998] NMI watchdog: enabled, takes one hw-pmu counter.

[ 0.026998] Booting Node 0, Processors #1 Ok.

[ 0.038036] NMI watchdog: enabled, takes one hw-pmu counter.

[ 0.038086] Brought up 2 CPUs

[ 0.038089] Total of 2 processors activated (7979.81 BogoMIPS).

[ 0.040039] devtmpfs: initialized

[ 0.040219] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffeffff] (335872 bytes)

[ 0.041164] atomic64 test passed for x86-64 platform with CX8 and with SSE

[ 0.041192] RTC time: 11:52:44, date: 08/04/12

[ 0.041232] NET: Registered protocol family 16

[ 0.041506] ACPI: bus type pci registered

[ 0.041569] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.041572] PCI: not using MMCONFIG

[ 0.041574] PCI: Using configuration type 1 for base access

[ 0.041696] mtrr: your CPUs had inconsistent variable MTRR settings

[ 0.041698] mtrr: probably your BIOS does not setup all CPUs.

[ 0.041700] mtrr: corrected configuration.

[ 0.042578] bio: create slab <bio-0> at 0

[ 0.042578] ACPI: Added _OSI(Module Device)

[ 0.042578] ACPI: Added _OSI(Processor Device)

[ 0.042578] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.042578] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.043988] ACPI: EC: Look up EC in DSDT

[ 0.045227] ACPI: Executed 1 blocks of module-level executable AML code

[ 0.048248] ACPI: SSDT 000000007ff9e0b0 008FE (v01 AMI CPU1PM 00000001 INTL 20060113)

[ 0.048557] ACPI: Dynamic OEM Table Load:

[ 0.048560] ACPI: SSDT (null) 008FE (v01 AMI CPU1PM 00000001 INTL 20060113)

[ 0.048741] ACPI: SSDT 000000007ff9e9b0 00120 (v01 AMI CPU2PM 00000001 INTL 20060113)

[ 0.049101] ACPI: Dynamic OEM Table Load:

[ 0.049105] ACPI: SSDT (null) 00120 (v01 AMI CPU2PM 00000001 INTL 20060113)

[ 0.049403] ACPI: Interpreter enabled

[ 0.049407] ACPI: (supports S0 S3 S4 S5)

[ 0.049426] ACPI: Using IOAPIC for interrupt routing

[ 0.049447] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.049831] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

[ 1.595168] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62

[ 1.595312] ACPI: No dock devices found.

[ 1.595318] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[ 1.595383] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 1.595487] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)

[ 1.595491] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)

[ 1.595494] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)

[ 1.595497] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)

[ 1.595500] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)

[ 1.595502] PCI: root bus 00: using default resources

[ 1.595537] PCI host bridge to bus 0000:00

[ 1.595540] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]

[ 1.595543] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]

[ 1.595555] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000

[ 1.595613] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400

[ 1.595665] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 1.595710] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300

[ 1.595756] pci 0000:00:1a.0: reg 20: [io 0xb880-0xb89f]

[ 1.595797] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300

[ 1.595842] pci 0000:00:1a.1: reg 20: [io 0xbc00-0xbc1f]

[ 1.595890] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320

[ 1.595912] pci 0000:00:1a.7: reg 10: [mem 0xf3fffc00-0xf3ffffff]

[ 1.596004] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[ 1.596032] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300

[ 1.596049] pci 0000:00:1b.0: reg 10: [mem 0xf3ff8000-0xf3ffbfff 64bit]

[ 1.596128] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 1.596153] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400

[ 1.596234] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 1.596261] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400

[ 1.596342] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 1.596372] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400

[ 1.596453] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 1.596482] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300

[ 1.596528] pci 0000:00:1d.0: reg 20: [io 0xb400-0xb41f]

[ 1.596564] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300

[ 1.596609] pci 0000:00:1d.1: reg 20: [io 0xb480-0xb49f]

[ 1.596645] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300

[ 1.596690] pci 0000:00:1d.2: reg 20: [io 0xb800-0xb81f]

[ 1.596737] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320

[ 1.596759] pci 0000:00:1d.7: reg 10: [mem 0xf3fff800-0xf3fffbff]

[ 1.596856] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 1.596879] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401

[ 1.596952] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100

[ 1.597042] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 4700 (mask 000b)

[ 1.597046] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)

[ 1.597094] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a

[ 1.597108] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]

[ 1.597119] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]

[ 1.597129] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]

[ 1.597140] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]

[ 1.597150] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]

[ 1.597197] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601

[ 1.597217] pci 0000:00:1f.2: reg 10: [io 0xb080-0xb087]

[ 1.597226] pci 0000:00:1f.2: reg 14: [io 0xb000-0xb003]

[ 1.597236] pci 0000:00:1f.2: reg 18: [io 0xac00-0xac07]

[ 1.597245] pci 0000:00:1f.2: reg 1c: [io 0xa880-0xa883]

[ 1.597254] pci 0000:00:1f.2: reg 20: [io 0xa800-0xa81f]

[ 1.597264] pci 0000:00:1f.2: reg 24: [mem 0xf3fff000-0xf3fff7ff]

[ 1.597312] pci 0000:00:1f.2: PME# supported from D3hot

[ 1.597331] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500

[ 1.597345] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]

[ 1.597376] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]

[ 1.597453] pci 0000:01:00.0: [10de:0425] type 00 class 0x030000

[ 1.597466] pci 0000:01:00.0: reg 10: [mem 0xf7000000-0xf7ffffff]

[ 1.597479] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]

[ 1.597492] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]

[ 1.597501] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]

[ 1.597511] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 1.598777] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[ 1.598781] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]

[ 1.598785] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]

[ 1.598790] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]

[ 1.598836] pci 0000:00:1c.0: PCI bridge to [bus 05-05]

[ 1.598909] pci 0000:04:00.0: [168c:001c] type 00 class 0x020000

[ 1.598934] pci 0000:04:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit]

[ 1.599082] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 1.599092] pci 0000:00:1c.1: PCI bridge to [bus 04-04]

[ 1.599099] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]

[ 1.599151] pci 0000:00:1c.2: PCI bridge to [bus 02-03]

[ 1.599155] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]

[ 1.599160] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbdfffff]

[ 1.599166] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdfffffff 64bit pref]

[ 1.599204] pci 0000:06:01.0: [1180:0832] type 00 class 0x0c0010

[ 1.599218] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)

[ 1.599220] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller

[ 1.599235] pci 0000:06:01.0: reg 10: [mem 0xfbffe800-0xfbffefff]

[ 1.599318] pci 0000:06:01.0: supports D1 D2

[ 1.599320] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 1.599342] pci 0000:06:01.1: [1180:0822] type 00 class 0x080500

[ 1.599361] pci 0000:06:01.1: reg 10: [mem 0xfbfff000-0xfbfff0ff]

[ 1.599444] pci 0000:06:01.1: supports D1 D2

[ 1.599446] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold

[ 1.599468] pci 0000:06:01.2: [1180:0592] type 00 class 0x088000

[ 1.599487] pci 0000:06:01.2: reg 10: [mem 0xfbfff800-0xfbfff8ff]

[ 1.599570] pci 0000:06:01.2: supports D1 D2

[ 1.599572] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold

[ 1.599594] pci 0000:06:01.3: [1180:0852] type 00 class 0x088000

[ 1.599613] pci 0000:06:01.3: reg 10: [mem 0xfbfffc00-0xfbfffcff]

[ 1.599696] pci 0000:06:01.3: supports D1 D2

[ 1.599698] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold

[ 1.599735] pci 0000:06:07.0: [10ec:8167] type 00 class 0x020000

[ 1.599754] pci 0000:06:07.0: reg 10: [io 0xe800-0xe8ff]

[ 1.599769] pci 0000:06:07.0: reg 14: [mem 0xfbffe400-0xfbffe4ff]

[ 1.599815] pci 0000:06:07.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]

[ 1.599846] pci 0000:06:07.0: supports D1 D2

[ 1.599849] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold

[ 1.599893] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)

[ 1.599897] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]

[ 1.599902] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]

[ 1.599909] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)

[ 1.599912] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)

[ 1.599937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 1.600016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 1.600094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

[ 1.600122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]

[ 1.600150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]

[ 1.600179] pci0000:00: Requesting ACPI _OSC control (0x1d)

[ 1.600182] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d

[ 1.600184] ACPI _OSC control for PCIe not granted, disabling ASPM

[ 1.625943] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 1.625993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)

[ 1.626041] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 1.626088] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)

[ 1.626135] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 1.626184] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)

[ 1.626231] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 1.626279] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)

[ 1.626786] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 1.626792] vgaarb: loaded

[ 1.626793] vgaarb: bridge control possible 0000:01:00.0

[ 1.626883] SCSI subsystem initialized

[ 1.626897] libata version 3.00 loaded.

[ 1.626897] usbcore: registered new interface driver usbfs

[ 1.626897] usbcore: registered new interface driver hub

[ 1.626897] usbcore: registered new device driver usb

[ 1.626897] PCI: Using ACPI for IRQ routing

[ 1.634452] PCI: pci_cache_line_size set to 64 bytes

[ 1.634553] reserve RAM buffer: 000000000009ac00 - 000000000009ffff

[ 1.634556] reserve RAM buffer: 000000007ff90000 - 000000007fffffff

[ 1.634678] NetLabel: Initializing

[ 1.634680] NetLabel: domain hash size = 128

[ 1.634682] NetLabel: protocols = UNLABELED CIPSOv4

[ 1.634696] NetLabel: unlabeled traffic allowed by default

[ 1.634767] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[ 1.634772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 1.634778] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

[ 1.637777] Switching to clocksource hpet

[ 1.647473] pnp: PnP ACPI init

[ 1.647499] ACPI: bus type pnp registered

[ 1.647619] pnp 00:00: [bus 00-ff]

[ 1.647622] pnp 00:00: [io 0x0cf8-0x0cff]

[ 1.647625] pnp 00:00: [io 0x0000-0x0cf7 window]

[ 1.647627] pnp 00:00: [io 0x0d00-0xffff window]

[ 1.647629] pnp 00:00: [mem 0x000a0000-0x000bffff window]

[ 1.647632] pnp 00:00: [mem 0x000d0000-0x000dffff window]

[ 1.647634] pnp 00:00: [mem 0x80000000-0xffffffff window]

[ 1.647706] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)

[ 1.647716] pnp 00:01: [mem 0xfed14000-0xfed19fff]

[ 1.647786] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved

[ 1.647790] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 1.647808] pnp 00:02: [dma 4]

[ 1.647810] pnp 00:02: [io 0x0000-0x000f]

[ 1.647812] pnp 00:02: [io 0x0081-0x0083]

[ 1.647814] pnp 00:02: [io 0x0087]

[ 1.647816] pnp 00:02: [io 0x0089-0x008b]

[ 1.647818] pnp 00:02: [io 0x008f]

[ 1.647820] pnp 00:02: [io 0x00c0-0x00df]

[ 1.647843] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)

[ 1.647854] pnp 00:03: [io 0x0070-0x0071]

[ 1.647871] pnp 00:03: [irq 8]

[ 1.647898] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 1.647929] pnp 00:04: [io 0x0060]

[ 1.647931] pnp 00:04: [io 0x0064]

[ 1.647937] pnp 00:04: [irq 1]

[ 1.647962] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)

[ 1.647993] pnp 00:05: [irq 12]

[ 1.648032] pnp 00:05: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f13 (active)

[ 1.648043] pnp 00:06: [io 0x0061]

[ 1.648067] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)

[ 1.648077] pnp 00:07: [io 0x00f0-0x00ff]

[ 1.648082] pnp 00:07: [irq 13]

[ 1.648110] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 1.648192] pnp 00:08: [io 0x0010-0x001f]

[ 1.648194] pnp 00:08: [io 0x0022-0x003f]

[ 1.648196] pnp 00:08: [io 0x0044-0x004d]

[ 1.648202] pnp 00:08: [io 0x0050-0x005e]

[ 1.648204] pnp 00:08: [io 0x0063]

[ 1.648206] pnp 00:08: [io 0x0065]

[ 1.648208] pnp 00:08: [io 0x0067-0x006f]

[ 1.648210] pnp 00:08: [io 0x0072-0x007f]

[ 1.648212] pnp 00:08: [io 0x0080]

[ 1.648214] pnp 00:08: [io 0x0084-0x0086]

[ 1.648216] pnp 00:08: [io 0x0088]

[ 1.648218] pnp 00:08: [io 0x008c-0x008e]

[ 1.648220] pnp 00:08: [io 0x0090-0x009f]

[ 1.648222] pnp 00:08: [io 0x00a2-0x00bf]

[ 1.648224] pnp 00:08: [io 0x00e0-0x00ef]

[ 1.648226] pnp 00:08: [io 0x025c-0x025f]

[ 1.648228] pnp 00:08: [io 0x04d0-0x04d1]

[ 1.648230] pnp 00:08: [io 0x0800-0x087f]

[ 1.648232] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]

[ 1.648234] pnp 00:08: [io 0x0500-0x053f]

[ 1.648237] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]

[ 1.648239] pnp 00:08: [mem 0xfed20000-0xfed3ffff]

[ 1.648241] pnp 00:08: [mem 0xfed50000-0xfed8ffff]

[ 1.648243] pnp 00:08: [mem 0xffb00000-0xffbfffff]

[ 1.648245] pnp 00:08: [mem 0xfff00000-0xffffffff]

[ 1.648324] system 00:08: [io 0x025c-0x025f] has been reserved

[ 1.648327] system 00:08: [io 0x04d0-0x04d1] has been reserved

[ 1.648330] system 00:08: [io 0x0800-0x087f] has been reserved

[ 1.648333] system 00:08: [io 0x0500-0x053f] has been reserved

[ 1.648336] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 1.648339] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved

[ 1.648342] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved

[ 1.648345] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved

[ 1.648348] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved

[ 1.648352] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 1.648411] pnp 00:09: [mem 0xfed00000-0xfed003ff]

[ 1.648439] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)

[ 1.648483] pnp 00:0a: [mem 0xfec00000-0xfec00fff]

[ 1.648486] pnp 00:0a: [mem 0xfee00000-0xfee00fff]

[ 1.648535] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 1.648538] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved

[ 1.648542] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 1.648585] pnp 00:0b: [mem 0xe0000000-0xefffffff]

[ 1.648630] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved

[ 1.648634] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 1.649735] pnp 00:0c: [mem 0x00000000-0x0009ffff]

[ 1.649738] pnp 00:0c: [mem 0x000c0000-0x000cffff]

[ 1.649740] pnp 00:0c: [mem 0x000e0000-0x000fffff]

[ 1.649742] pnp 00:0c: [mem 0x00100000-0x7fffffff]

[ 1.649745] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]

[ 1.649810] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved

[ 1.649813] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved

[ 1.649816] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved

[ 1.649819] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved

[ 1.649823] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 1.649957] pnp: PnP ACPI: found 13 devices

[ 1.649959] ACPI: ACPI bus type pnp unregistered

[ 1.656839] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000

[ 1.656844] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000

[ 1.656848] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 200000

[ 1.656858] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000

[ 1.656862] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000

[ 1.656884] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000

[ 1.656887] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000

[ 1.656891] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000

[ 1.656894] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000

[ 1.656897] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000

[ 1.656903] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]

[ 1.656906] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]

[ 1.656910] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]

[ 1.656914] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]

[ 1.656917] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]

[ 1.656920] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80600000-0x806000ff]

[ 1.656927] pci 0000:01:00.0: BAR 6: assigned [mem 0xf6000000-0xf601ffff pref]

[ 1.656930] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[ 1.656933] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]

[ 1.656938] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]

[ 1.656942] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]

[ 1.656947] pci 0000:00:1c.0: PCI bridge to [bus 05-05]

[ 1.656950] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]

[ 1.656956] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]

[ 1.656960] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]

[ 1.656967] pci 0000:00:1c.1: PCI bridge to [bus 04-04]

[ 1.656970] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]

[ 1.656976] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]

[ 1.656980] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]

[ 1.656987] pci 0000:00:1c.2: PCI bridge to [bus 02-03]

[ 1.656990] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]

[ 1.656996] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbdfffff]

[ 1.657007] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdfffffff 64bit pref]

[ 1.657015] pci 0000:00:1e.0: PCI bridge to [bus 06-06]

[ 1.657018] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]

[ 1.657024] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]

[ 1.657050] pci 0000:00:1c.0: enabling device (0104 -> 0107)

[ 1.657061] pci 0000:00:1c.1: enabling device (0106 -> 0107)

[ 1.657080] pci 0000:00:1e.0: setting latency timer to 64

[ 1.657085] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]

[ 1.657087] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]

[ 1.657090] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]

[ 1.657093] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]

[ 1.657095] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]

[ 1.657098] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]

[ 1.657101] pci_bus 0000:05: resource 1 [mem 0x80000000-0x801fffff]

[ 1.657103] pci_bus 0000:05: resource 2 [mem 0x80200000-0x803fffff 64bit pref]

[ 1.657106] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]

[ 1.657109] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]

[ 1.657111] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]

[ 1.657114] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]

[ 1.657117] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbdfffff]

[ 1.657119] pci_bus 0000:02: resource 2 [mem 0xdc000000-0xdfffffff 64bit pref]

[ 1.657122] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]

[ 1.657125] pci_bus 0000:06: resource 1 [mem 0xfbf00000-0xfbffffff]

[ 1.657127] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]

[ 1.657130] pci_bus 0000:06: resource 5 [mem 0x00000000-0xfffffffff]

[ 1.657182] NET: Registered protocol family 2

[ 1.657309] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)

[ 1.658166] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

[ 1.660858] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 1.661627] TCP: Hash tables configured (established 262144 bind 65536)

[ 1.661630] TCP: reno registered

[ 1.661642] UDP hash table entries: 1024 (order: 3, 32768 bytes)

[ 1.661673] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[ 1.661821] NET: Registered protocol family 1

[ 1.869185] pci 0000:01:00.0: Boot video device

[ 1.869205] PCI: CLS 32 bytes, default 64

[ 1.869276] Unpacking initramfs...

[ 2.271391] Freeing initrd memory: 17280k freed

[ 2.284881] audit: initializing netlink socket (disabled)

[ 2.284901] type=2000 audit(1344081166.283:1): initialized

[ 2.305868] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 2.307831] VFS: Disk quotas dquot_6.5.2

[ 2.307878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 2.308358] msgmni has been set to 3998

[ 2.308429] SELinux: Registering netfilter hooks

[ 2.308902] alg: No test for stdrng (krng)

[ 2.308910] NET: Registered protocol family 38

[ 2.308954] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 2.308984] io scheduler noop registered

[ 2.308986] io scheduler deadline registered

[ 2.309054] io scheduler cfq registered (default)

[ 2.309210] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X

[ 2.309304] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X

[ 2.309404] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X

[ 2.309506] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X

[ 2.309598] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 2.309620] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 2.309622] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 2.309848] acpiphp: Slot [1] registered

[ 2.309917] vesafb: mode is 640x480x32, linelength=2560, pages=0

[ 2.309919] vesafb: scrolling: redraw

[ 2.309922] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[ 2.310202] vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90010980000, using 1216k, total 1216k

[ 2.310285] Console: switching to colour frame buffer device 80x30

[ 2.332684] fb0: VESA VGA frame buffer device

[ 2.332697] intel_idle: does not run on family 6 model 15

[ 2.332766] ACPI: AC Adapter [AC0] (on-line)

[ 2.332880] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0

[ 2.333693] ACPI: Lid Switch [LID]

[ 2.333741] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1

[ 2.333746] ACPI: Sleep Button [sLPB]

[ 2.333788] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2

[ 2.333791] ACPI: Power Button [PWRB]

[ 2.333834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[ 2.333838] ACPI: Power Button [PWRF]

[ 2.334043] ACPI: Requesting acpi_cpufreq

[ 2.335111] Marking TSC unstable due to TSC halts in idle

[ 2.335120] ACPI: acpi_idle registered with cpuidle

[ 2.340066] thermal LNXTHERM:00: registered as thermal_zone0

[ 2.340069] ACPI: Thermal Zone [TZ00] (37 C)

[ 2.340102] GHES: HEST is not enabled!

[ 2.340190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 2.340850] Non-volatile memory driver v1.3

[ 2.340853] Linux agpgart interface v0.103

[ 2.341176] ACPI: Battery Slot [bAT0] (battery absent)

[ 2.341930] loop: module loaded

[ 2.341995] ahci 0000:00:1f.2: version 3.0

[ 2.342052] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X

[ 2.342114] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode

[ 2.342118] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems

[ 2.342123] ahci 0000:00:1f.2: setting latency timer to 64

[ 2.346323] scsi0 : ahci

[ 2.346418] scsi1 : ahci

[ 2.346500] scsi2 : ahci

[ 2.346594] ata1: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff100 irq 44

[ 2.346598] ata2: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff180 irq 44

[ 2.346601] ata3: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff200 irq 44

[ 2.346692] ata_piix 0000:00:1f.1: version 2.13

[ 2.346734] ata_piix 0000:00:1f.1: setting latency timer to 64

[ 2.347032] scsi3 : ata_piix

[ 2.347099] scsi4 : ata_piix

[ 2.348041] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

[ 2.348044] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

[ 2.348215] ata5: port disabled--ignoring

[ 2.348248] Fixed MDIO Bus: probed

[ 2.348319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 2.348351] ehci_hcd 0000:00:1a.7: setting latency timer to 64

[ 2.348355] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 2.348409] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1

[ 2.348443] ehci_hcd 0000:00:1a.7: debug port 1

[ 2.352341] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported

[ 2.352360] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00

[ 2.358015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[ 2.358040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.358043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.358046] usb usb1: Product: EHCI Host Controller

[ 2.358048] usb usb1: Manufacturer: Linux 3.4.6-2.fc17.x86_64 ehci_hcd

[ 2.358051] usb usb1: SerialNumber: 0000:00:1a.7

[ 2.358157] hub 1-0:1.0: USB hub found

[ 2.358162] hub 1-0:1.0: 4 ports detected

[ 2.358246] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 2.358250] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 2.358303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2

[ 2.358334] ehci_hcd 0000:00:1d.7: debug port 1

[ 2.362229] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

[ 2.362244] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800

[ 2.368017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[ 2.368045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.368049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.368051] usb usb2: Product: EHCI Host Controller

[ 2.368053] usb usb2: Manufacturer: Linux 3.4.6-2.fc17.x86_64 ehci_hcd

[ 2.368056] usb usb2: SerialNumber: 0000:00:1d.7

[ 2.368152] hub 2-0:1.0: USB hub found

[ 2.368159] hub 2-0:1.0: 6 ports detected

[ 2.368235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 2.368249] uhci_hcd: USB Universal Host Controller Interface driver

[ 2.368273] uhci_hcd 0000:00:1a.0: setting latency timer to 64

[ 2.368276] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 2.368317] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3

[ 2.368349] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880

[ 2.368389] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.368391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.368394] usb usb3: Product: UHCI Host Controller

[ 2.368396] usb usb3: Manufacturer: Linux 3.4.6-2.fc17.x86_64 uhci_hcd

[ 2.368399] usb usb3: SerialNumber: 0000:00:1a.0

[ 2.368485] hub 3-0:1.0: USB hub found

[ 2.368490] hub 3-0:1.0: 2 ports detected

[ 2.368560] uhci_hcd 0000:00:1a.1: setting latency timer to 64

[ 2.368564] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 2.368610] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4

[ 2.368644] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00

[ 2.368680] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.368683] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.368685] usb usb4: Product: UHCI Host Controller

[ 2.368688] usb usb4: Manufacturer: Linux 3.4.6-2.fc17.x86_64 uhci_hcd

[ 2.368690] usb usb4: SerialNumber: 0000:00:1a.1

[ 2.368781] hub 4-0:1.0: USB hub found

[ 2.368785] hub 4-0:1.0: 2 ports detected

[ 2.368854] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 2.368858] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 2.368901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5

[ 2.368925] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400

[ 2.368959] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.368962] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.368964] usb usb5: Product: UHCI Host Controller

[ 2.368967] usb usb5: Manufacturer: Linux 3.4.6-2.fc17.x86_64 uhci_hcd

[ 2.368969] usb usb5: SerialNumber: 0000:00:1d.0

[ 2.369063] hub 5-0:1.0: USB hub found

[ 2.369067] hub 5-0:1.0: 2 ports detected

[ 2.369136] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 2.369139] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 2.369194] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6

[ 2.369225] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480

[ 2.369265] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.369268] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.369270] usb usb6: Product: UHCI Host Controller

[ 2.369273] usb usb6: Manufacturer: Linux 3.4.6-2.fc17.x86_64 uhci_hcd

[ 2.369275] usb usb6: SerialNumber: 0000:00:1d.1

[ 2.369366] hub 6-0:1.0: USB hub found

[ 2.369370] hub 6-0:1.0: 2 ports detected

[ 2.369446] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 2.369449] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 2.369492] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7

[ 2.369515] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800

[ 2.369550] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.369553] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.369556] usb usb7: Product: UHCI Host Controller

[ 2.369558] usb usb7: Manufacturer: Linux 3.4.6-2.fc17.x86_64 uhci_hcd

[ 2.369560] usb usb7: SerialNumber: 0000:00:1d.2

[ 2.369645] hub 7-0:1.0: USB hub found

[ 2.369649] hub 7-0:1.0: 2 ports detected

[ 2.369761] usbcore: registered new interface driver usbserial

[ 2.369772] usbcore: registered new interface driver usbserial_generic

[ 2.369780] USB Serial support registered for generic

[ 2.369785] usbserial: USB Serial Driver core

[ 2.369829] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 2.371581] i8042: Detected active multiplexing controller, rev 1.1

[ 2.372233] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 2.372240] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[ 2.372272] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[ 2.372295] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[ 2.372321] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[ 2.372420] mousedev: PS/2 mouse device common for all mice

[ 2.372648] rtc_cmos 00:03: RTC can wake from S4

[ 2.372774] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 2.372799] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[ 2.372884] device-mapper: uevent: version 1.0.3

[ 2.372958] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]

[ 2.373047] cpuidle: using governor ladder

[ 2.373092] cpuidle: using governor menu

[ 2.373256] EFI Variables Facility v0.08 2004-May-17

[ 2.373372] usbcore: registered new interface driver usbhid

[ 2.373374] usbhid: USB HID core driver

[ 2.373490] ip_tables: © 2000-2006 Netfilter Core Team

[ 2.373522] TCP: cubic registered

[ 2.373524] Initializing XFRM netlink socket

[ 2.373643] NET: Registered protocol family 10

[ 2.373892] Mobile IPv6

[ 2.373895] NET: Registered protocol family 17

[ 2.373899] Registering the dns_resolver key type

[ 2.374107] PM: Hibernation image not present or could not be loaded.

[ 2.374123] registered taskstats version 1

[ 2.374667] Magic number: 8:815:882

[ 2.374795] rtc_cmos 00:03: setting system clock to 2012-08-04 11:52:46 UTC (1344081166)

[ 2.375119] Initializing network drop monitor service

[ 2.404845] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[ 2.651100] ata3: SATA link down (SStatus 0 SControl 300)

[ 2.651131] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.652039] ata2: SATA link down (SStatus 0 SControl 300)

[ 2.701354] ata4.01: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33

[ 2.719159] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010A, max UDMA/100

[ 2.719167] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 2.720287] ata1.00: configured for UDMA/100

[ 2.720529] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5

[ 2.720803] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 2.720810] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 2.720961] sd 0:0:0:0: [sda] Write Protect is off

[ 2.720968] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.721054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.742242] ata4.01: configured for UDMA/33

[ 2.745329] scsi 3:0:1:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5

[ 2.750470] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 2.750477] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 2.750674] sr 3:0:1:0: Attached scsi CD-ROM sr0

[ 2.750846] sr 3:0:1:0: Attached scsi generic sg1 type 5

[ 2.773050] usb 2-6: new high-speed USB device number 3 using ehci_hcd

[ 2.836798] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >

[ 2.837680] sd 0:0:0:0: [sda] Attached SCSI disk

[ 2.840187] Freeing unused kernel memory: 1000k freed

[ 2.840629] Write protecting the kernel read-only data: 12288k

[ 2.851027] Freeing unused kernel memory: 2024k freed

[ 2.857123] Freeing unused kernel memory: 1484k freed

[ 2.954643] dracut: dracut-018-78.git20120622.fc17

[ 3.007893] dracut: rd.luks=0: removing cryptoluks activation

[ 3.016338] dracut: rd.lvm=0: removing LVM activation

[ 3.031796] udevd[108]: starting version 182

[ 3.137302] usb 2-6: New USB device found, idVendor=174f, idProduct=6a51

[ 3.137309] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=10

[ 3.137315] usb 2-6: Product: USB2.0

[ 3.137319] usb 2-6: Manufacturer: Syntek

[ 3.140097] dracut: Starting plymouth daemon

[ 3.291439] dracut: rd.dm=0: removing DM RAID activation

[ 3.309344] dracut: rd.md=0: removing MD RAID activation

[ 3.333587] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0

[ 3.344038] usb 7-1: new full-speed USB device number 2 using uhci_hcd

[ 3.373456] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5

[ 3.385114] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/LNXVIDEO:00/input/input6

[ 3.385184] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

[ 3.403207] sdhci: Secure Digital Host Controller Interface driver

[ 3.403214] sdhci: Copyright© Pierre Ossman

[ 3.403708] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22)

[ 3.404765] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.

[ 3.406117] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.

[ 3.406417] Registered led device: mmc0::

[ 3.407006] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.

[ 3.409470] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA

[ 3.462086] firewire_ohci 0000:06:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11

[ 3.481517] mmc0: new SDHC card at address 0001

[ 3.482854] mmcblk0: mmc0:0001 00000 7.60 GiB

[ 3.484087] mmcblk0: p3

[ 3.484095] mmcblk0: p3 start 4294901760 is beyond EOD, truncated

[ 3.576574] usb 7-1: New USB device found, idVendor=0b05, idProduct=1712

[ 3.576582] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3

[ 3.576588] usb 7-1: SerialNumber: 0194E8-5B-0002

[ 3.963196] firewire_core 0000:06:01.0: created device fw0: GUID 0018e000ebe4b803, S400

[ 4.400849] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

[ 4.539804] dracut: Checking ext4: /dev/disk/by-uuid/b3d36e64-ddad-410b-80ee-2f56752b4e07

[ 4.540193] dracut: issuing e2fsck -a /dev/disk/by-uuid/b3d36e64-ddad-410b-80ee-2f56752b4e07

[ 4.665330] dracut: gazela-partition: clean, 359885/1313280 files, 3611256/5242880 blocks

[ 4.665825] dracut: Remounting /dev/disk/by-uuid/b3d36e64-ddad-410b-80ee-2f56752b4e07 with -o ro

[ 4.867506] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

[ 4.942976] dracut: Mounted root filesystem /dev/sda3

[ 5.269890] dracut: Switching root

[ 6.217363] type=1404 audit(1344081170.341:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[ 6.563898] SELinux: 2048 avtab hash slots, 101670 rules.

[ 6.583884] SELinux: 2048 avtab hash slots, 101670 rules.

[ 6.796962] SELinux: 9 users, 15 roles, 4174 types, 224 bools, 1 sens, 1024 cats

[ 6.796967] SELinux: 83 classes, 101670 rules

[ 6.802424] SELinux: Completing initialization.

[ 6.802428] SELinux: Setting up existing superblocks.

[ 6.802441] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[ 6.802448] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

[ 6.802468] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts

[ 6.802475] SELinux: initialized (dev proc, type proc), uses genfs_contexts

[ 6.802485] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 6.802501] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs

[ 6.803166] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

[ 6.803172] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

[ 6.805181] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

[ 6.805192] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts

[ 6.805197] SELinux: initialized (dev devpts, type devpts), uses transition SIDs

[ 6.805218] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs

[ 6.805227] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

[ 6.805236] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

[ 6.805265] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[ 6.806240] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 6.806249] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 6.806283] SELinux: initialized (dev sda3, type ext4), uses xattr

[ 6.806501] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts

[ 6.831099] type=1403 audit(1344081170.955:3): policy loaded auid=4294967295 ses=4294967295

[ 6.883286] systemd[1]: Successfully loaded SELinux policy in 692ms 225us.

[ 6.977437] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 6.985094] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.056815] systemd[1]: Relabelled /dev and /run in 71ms 547us.

[ 7.089109] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.097087] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.109112] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.117070] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.125052] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.133065] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.141106] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.149055] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 7.149171] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)

[ 7.169890] systemd[1]: Set hostname to <gazela>.

[ 8.694239] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

[ 10.227971] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 10.251733] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts

[ 10.252351] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs

[ 10.283558] udevd[292]: starting version 182

[ 10.327900] systemd-journald[288]: Fixed max_use=100.1M max_size=12.5M min_size=64.0K keep_free=50.0M

[ 10.328290] systemd-journald[288]: Vacuuming...

[ 10.622249] EXT4-fs (sda3): re-mounted. Opts: (null)

[ 10.923063] r592: driver successfully loaded

[ 10.923740] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)

[ 10.942516] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1

[ 11.070739] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02

[ 11.070755] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1

[ 11.072309] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02

[ 11.072567] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba

[ 11.346989] iTCO_vendor_support: vendor-support=0

[ 11.382582] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 11.382638] r8169 0000:06:07.0: (unregistered net_device): not PCI Express

[ 11.382903] r8169 0000:06:07.0: eth0: RTL8169sc/8110sc at 0xffffc90000364400, 00:1e:8c:48:60:13, XID 18000000 IRQ 18

[ 11.382908] r8169 0000:06:07.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]

[ 11.537951] RPC: Registered named UNIX socket transport module.

[ 11.537956] RPC: Registered udp transport module.

[ 11.537958] RPC: Registered tcp transport module.

[ 11.537960] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 11.539536] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts

[ 11.539939] cfg80211: Calling CRDA to update world regulatory domain

[ 11.877203] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07

[ 11.877710] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS

[ 12.043962] ath5k 0000:04:00.0: registered as 'phy0'

[ 12.213557] asus_laptop: Asus Laptop Support version 0.42

[ 12.213625] asus_laptop: Error calling BSTS

[ 12.213662] asus_laptop: S96S model detected

[ 12.220566] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7

[ 12.220768] Registered led device: asus::mail

[ 12.422442] Installing knfsd (copyright © 1996 [email protected]).

[ 12.422967] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts

[ 12.471105] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X

[ 12.487674] ALSA sound/pci/hda/patch_realtek.c:1254 SKU: Nid=0x1d sku_cfg=0x40138205

[ 12.487678] ALSA sound/pci/hda/patch_realtek.c:1256 SKU: port_connectivity=0x1

[ 12.487681] ALSA sound/pci/hda/patch_realtek.c:1257 SKU: enable_pcbeep=0x1

[ 12.487684] ALSA sound/pci/hda/patch_realtek.c:1258 SKU: check_sum=0x00000003

[ 12.487686] ALSA sound/pci/hda/patch_realtek.c:1259 SKU: customization=0x00000082

[ 12.487689] ALSA sound/pci/hda/patch_realtek.c:1260 SKU: external_amp=0x0

[ 12.487691] ALSA sound/pci/hda/patch_realtek.c:1261 SKU: platform_type=0x1

[ 12.487698] ALSA sound/pci/hda/patch_realtek.c:1262 SKU: swap=0x0

[ 12.487700] ALSA sound/pci/hda/patch_realtek.c:1263 SKU: override=0x1

[ 12.487706] ALSA sound/pci/hda/hda_codec.c:5101 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[ 12.487710] ALSA sound/pci/hda/hda_codec.c:5105 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 12.487713] ALSA sound/pci/hda/hda_codec.c:5109 hp_outs=1 (0x15/0x0/0x0/0x0/0x0)

[ 12.487716] ALSA sound/pci/hda/hda_codec.c:5110 mono: mono_out=0x0

[ 12.487718] ALSA sound/pci/hda/hda_codec.c:5113 dig-out=0x1e/0x0

[ 12.487720] ALSA sound/pci/hda/hda_codec.c:5114 inputs:

[ 12.487723] ALSA sound/pci/hda/hda_codec.c:5118 Mic=0x18

[ 12.487725] ALSA sound/pci/hda/hda_codec.c:5118 Internal Mic=0x19

[ 12.487728] ALSA sound/pci/hda/hda_codec.c:5120

[ 12.489182] ALSA sound/pci/hda/patch_realtek.c:1317 realtek: No valid SSID, checking pincfg 0x40138205 for NID 0x1d

[ 12.489186] ALSA sound/pci/hda/patch_realtek.c:1333 realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0883

[ 12.512376] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8

[ 12.512527] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9

[ 12.582122] ath: EEPROM regdomain: 0x60

[ 12.582125] ath: EEPROM indicates we should expect a direct regpair map

[ 12.582129] ath: Country alpha2 being used: 00

[ 12.582131] ath: Regpair used: 0x60

[ 12.585349] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[ 12.585640] Registered led device: ath5k-phy0::rx

[ 12.585666] Registered led device: ath5k-phy0::tx

[ 12.585675] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)

[ 12.960367] cfg80211: World regulatory domain updated:

[ 12.960371] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 12.960374] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 12.960377] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 12.960380] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 12.960383] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 12.960386] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 14.272276] cfg80211: Calling CRDA for country: PL

[ 14.275660] cfg80211: Regulatory domain changed to country: PL

[ 14.275664] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 14.275667] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.275669] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.275672] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.275675] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)

[ 15.494567] Adding 996024k swap on /dev/sda2. Priority:0 extents:1 across:996024k

[ 15.656237] udevd[339]: renamed network interface eth0 to em2

[ 15.667046] Bluetooth: Core ver 2.16

[ 15.667069] NET: Registered protocol family 31

[ 15.667071] Bluetooth: HCI device and connection manager initialized

[ 15.667122] Bluetooth: HCI socket layer initialized

[ 15.667124] Bluetooth: L2CAP socket layer initialized

[ 15.667137] Bluetooth: SCO socket layer initialized

[ 15.671369] usbcore: registered new interface driver btusb

[ 16.257464] nvidia: module license 'NVIDIA' taints kernel.

[ 16.257471] Disabling lock debugging due to kernel taint

[ 16.287619] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem

[ 16.287811] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.59 Wed Jun 6 21:19:40 PDT 2012

[ 23.532193] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem

[ 23.550624] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

[ 23.805030] SELinux: initialized (dev sda6, type ext3), uses xattr

[ 23.923584] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)

[ 23.923601] SELinux: initialized (dev sda7, type ext4), uses xattr

[ 25.965462] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem

[ 26.008712] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)

[ 26.008730] SELinux: initialized (dev sda5, type ext3), uses xattr

[ 26.454146] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)

[ 26.454167] SELinux: initialized (dev sda8, type ext4), uses xattr

[ 28.022990] ip6_tables: © 2000-2006 Netfilter Core Team

[ 28.034403] vboxdrv: Found 2 processor cores.

[ 28.039959] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[ 28.048918] vboxdrv: fAsync=0 offMin=0x1e0 offMax=0xf30

[ 28.049137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 28.049140] vboxdrv: Successfully loaded version 4.1.18 (interface 0x00190000).

[ 28.146837] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 28.146840] Bluetooth: BNEP filters: protocol multicast

[ 28.285417] vboxpci: IOMMU not found (not registered)

[ 28.356949] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 28.375496] r8169 0000:06:07.0: em2: link down

[ 28.375515] r8169 0000:06:07.0: em2: link down

[ 28.375948] ADDRCONF(NETDEV_UP): em2: link is not ready

[ 28.473491] Bluetooth: RFCOMM TTY layer initialized

[ 28.473498] Bluetooth: RFCOMM socket layer initialized

[ 28.473500] Bluetooth: RFCOMM ver 1.11

[ 28.686779] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory

[ 28.695176] NFSD: starting 90-second grace period

[ 30.758184] wlan0: authenticate with 00:0d:f3:0d:be:ba

[ 30.764319] wlan0: send auth to 00:0d:f3:0d:be:ba (try 1/3)

[ 30.765972] wlan0: authenticated

[ 30.772027] wlan0: associate with 00:0d:f3:0d:be:ba (try 1/3)

[ 30.785320] wlan0: RX AssocResp from 00:0d:f3:0d:be:ba (capab=0x411 status=0 aid=1)

[ 30.785666] wlan0: associated

[ 30.785926] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 31.476515] NVRM: Your system is not currently configured to drive a VGA console

[ 31.476523] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver

[ 31.476529] NVRM: requires the use of a text-mode VGA console. Use of other console

[ 31.476534] NVRM: drivers including, but not limited to, vesafb, may result in

[ 31.476538] NVRM: corruption and stability problems, and is not supported.

[ 41.532313] wlan0: no IPv6 routers present

[ 1098.034096] fuse init (API version 7.18)

[ 1098.063594] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts

[ 1098.076036] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[ 1112.328563] SELinux: initialized (dev mmcblk0, type vfat), uses genfs_contexts

[ 3347.007091] ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000

[ 3587.007360] ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000

[ 9468.959054] ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000

[ 9685.765750] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)

Odnośnik do komentarza
Udostępnij na innych stronach

Mam zapewne ten sam problem, rozwiazaniem jest instalacja modulu jadra ze stony http://syntekdriver.svn.sourceforge.net/viewvc/syntekdriver/tags/3.0.0/

i jedynie wersja 3.0.0 wspolpracuje z kernelem 3.x.x. Niestety nie udalo mi sie znalezc paczki rpm z tymi modulami, trzeba kompilowac recznie. Paczki istnieja ale do OpenSuse, Magei, Archa itd. Narazie wlasnie nie udalo mi sie znalezc gotowych paczek dla ubuntu no i wlasnie Fedory... :(

 

Nie wiem, moze bylby ktos taki dobry i zrobil te paczki :) Dalbym nawet na dobre piwo za to :D

Odnośnik do komentarza
Udostępnij na innych stronach

  • 4 weeks later...

Pobralem sterowniki.

 

make -f Makefile.standalone
make -C /lib/modules/3.5.2-3.fc17.x86_64/build SUBDIRS= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
make[2]: *** No rule to make target `/usr/src/kernels/3.5.2-3.fc17.x86_64/arch/x86/syscalls/syscall_32.tbl', needed by `arch/x86/syscalls/../include/generated/asm/unistd_32.h'.  Stop.
make[1]: *** [archheaders] Error 2
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
make: *** [driver] Error 2

Odnośnik do komentarza
Udostępnij na innych stronach

Jeśli chcesz dodać odpowiedź, zaloguj się lub zarejestruj nowe konto

Jedynie zarejestrowani użytkownicy mogą komentować zawartość tej strony.

Zarejestruj nowe konto

Załóż nowe konto. To bardzo proste!

Zarejestruj się

Zaloguj się

Posiadasz już konto? Zaloguj się poniżej.

Zaloguj się
×
×
  • Dodaj nową pozycję...