Skocz do zawartości

Błąd READ FPDMA QUEUED

Amos

Przez Amos,
w Sprzęt i sterowniki

 Share

Rekomendowane odpowiedzi

Amos Ekspert

Amos

Napisano
Napisano

 

Po zawiesze i twardym resecie system na okrągło sypie komunikatem: 

21.01.2020 18:06	kernel	ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x0
21.01.2020 18:06	kernel	ata1.00: irq_stat 0x40000008
21.01.2020 18:06	kernel	ata1.00: failed command: READ FPDMA QUEUED
21.01.2020 18:06	kernel	ata1.00: cmd 60/08:40:b8:b2:2d/00:00:38:00:00/40 tag 8 ncq dma 4096 in
         res 41/40:08:b8:b2:2d/00:00:38:00:00/00 Emask 0x409 (media error) <F>
21.01.2020 18:06	kernel	ata1.00: status: { DRDY ERR }
21.01.2020 18:06	kernel	ata1.00: error: { UNC }
21.01.2020 18:06	kernel	ata1.00: configured for UDMA/133
21.01.2020 18:06	kernel	sd 0:0:0:0: [sda] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=3s
21.01.2020 18:06	kernel	sd 0:0:0:0: [sda] tag#8 Sense Key : Medium Error [current] 
21.01.2020 18:06	kernel	sd 0:0:0:0: [sda] tag#8 Add. Sense: Unrecovered read error - auto reallocate failed
21.01.2020 18:06	kernel	sd 0:0:0:0: [sda] tag#8 CDB: Read(10) 28 00 38 2d b2 b8 00 00 08 00
21.01.2020 18:06	kernel	blk_update_request: I/O error, dev sda, sector 942518968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
21.01.2020 18:06	kernel	ata1: EH complete

A smartctl -a pokazuje: 

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.0-0.rc6.git2.1.fc32.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST500DM002-1BD142
Serial Number:    Z3TX68LP
LU WWN Device Id: 5 000c50 065e0a509
Firmware Version: KC48
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan 21 18:34:39 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x303f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   080   074   006    Pre-fail  Always       -       7271150
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2750
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       40
  7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       224515539
  9 Power_On_Hours          0x0032   087   087   000    Old_age   Always       -       11656
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2750
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       7077
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1 1 2
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   052   045    Old_age   Always       -       30 (Min/Max 21/32)
194 Temperature_Celsius     0x0022   030   048   000    Old_age   Always       -       30 (0 9 0 0 0)
195 Hardware_ECC_Recovered  0x001a   053   035   000    Old_age   Always       -       7271150
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       8
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       8
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       11707h+47m+03.616s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1066682344
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3652435338

SMART Error Log Version: 1
ATA Error Count: 7075 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 7075 occurred at disk power-on lifetime: 11655 hours (485 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      01:35:52.136  READ FPDMA QUEUED
  60 00 20 ff ff ff 4f 00      01:35:52.121  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      01:35:52.120  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      01:35:52.119  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:35:52.045  SET FEATURES [Set transfer mode]

Error 7074 occurred at disk power-on lifetime: 11655 hours (485 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      01:35:48.064  READ FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      01:35:48.063  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      01:35:48.063  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      01:35:48.063  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00      01:35:48.062  WRITE FPDMA QUEUED

Error 7073 occurred at disk power-on lifetime: 11655 hours (485 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      01:35:43.666  READ FPDMA QUEUED
  61 00 78 ff ff ff 4f 00      01:35:43.666  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      01:35:43.665  FLUSH CACHE EXT
  27 00 00 00 00 00 e0 00      01:35:43.665  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      01:35:43.664  IDENTIFY DEVICE

Error 7072 occurred at disk power-on lifetime: 11655 hours (485 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      01:35:39.764  READ FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      01:35:39.764  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      01:35:39.754  FLUSH CACHE EXT
  61 00 38 ff ff ff 4f 00      01:35:39.753  WRITE FPDMA QUEUED
  61 00 30 ff ff ff 4f 00      01:35:39.753  WRITE FPDMA QUEUED

Error 7071 occurred at disk power-on lifetime: 11655 hours (485 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      01:35:35.224  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      01:35:35.223  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      01:35:35.222  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:35:35.222  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      01:35:35.222  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%     10761         924319424

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Rozumiem, że na dysku pojawił się bad sector i bez kupna nowego sie nie obędzie.

Tylko, że tych komunikatów kernela jest tak dużo, że rsyslog non stop sie wywala, a systemd zrzuca coredump, co powoduje maksymalne obciążenie procesora i uniemożliwia praktycznie robienie czegokolwiek na kompie.

Żeby napisać tego posta, musiałem wyłączyć rsyslog.

Czy można coś zrobić, żeby nie sypało na okrągło tym komunikatem i żeby tak nie wywałalo ciągle rsysloga póki nie wymienię dysku?

Odnośnik do komentarza
Udostępnij na innych stronach
Amos Ekspert

Amos

Napisano
  • Autor
Napisano
9 godzin temu, sunrise napisał:

Może spróbuj zablokować logowanie w journald. W pliku  /etc/systemd/journald.conf ustaw Storage na volatile lub none ni i wyłącz rsysloga

Dzięki, spróbuję po pracy.

 

Ale dlaczego rsyslog ciągle się wywala? Czy on sam albo jakiś inny proces próbuje coś odczytać/zapisać na tym uszkodzonym miejscu dysku?

Ten komunikat kernela z błędem I/O Error na sektorze dysku zauważyłem w logach już jakieś pół roku wcześniej, ale pojawiał się rzadko i nijak to nie wpływało na pracę systemu i na działanie rsyslog. Dopiero w ostatni piątek - zamarznięcie Plasmy, twardy reset i po restarcie - komunikat co sekundę i wywalanie rsyslog...

Odnośnik do komentarza
Udostępnij na innych stronach

Jeśli chcesz dodać odpowiedź, zaloguj się lub zarejestruj nowe konto

Jedynie zarejestrowani użytkownicy mogą komentować zawartość tej strony.

Zarejestruj nowe konto

Załóż nowe konto. To bardzo proste!

Zarejestruj się

Zaloguj się

Posiadasz już konto? Zaloguj się poniżej.

Zaloguj się
 Share
Przejdź do listy tematów
×
×
  • Dodaj nową pozycję...