Problem Z Neostradą/modemem Pod Fedora 12

[thof]

Ehh a ja myślałem, że już wszędzie dają darmowe routery...

Rozłącz, a potem podłącz na nowo urządzenie i załaduj moduł (chociaż powinien być ładowany automatycznie) i wrzuć tu co pojawi się w konsoli po wydaniu komendy dmesg

[linluke9]

Zrobilem:

 

[root@Moj-Komputer Linnet]# modprobe speedtch
[root@Moj-Komputer Linnet]# /sbin/lsmod | grep speedtch
speedtch               12196  0 
usbatm                 14572  1 speedtch
[root@Moj-Komputer Linnet]# rmmod speedtch
[root@Moj-Komputer Linnet]# modprobe speedtch
[root@Moj-Komputer Linnet]# /sbin/lsmod | grep speedtch
speedtch               12196  0 
usbatm                 14572  1 speedtch
[root@Moj-Komputer Linnet]# pppd call linnet
Plugin pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:0.35
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
[root@Moj-Komputer Linnet]#

 

dodam tylko ze w trakcie tej czynnosci dioda miga, o ile ma to znaczenie zas modem w usb wpiety

Edytowane Maj 27, 2010 przez WalDo

[linluke9]

to oczywiscie zrobilem zanim pojawil sie post thof'a, ide zawalczyc raz jeszcze

[thof]

Diody nie mogą migać, bo to oznacza brak synchronizacji z linią. Napisz w jaki sposób logujesz się na roota oraz wklej zawartości plików cat /etc/ppp/peers/linnet i cat /etc/ppp/chap-secrets . Tego dmesg wklej po wykonaniu próby połączenie.

[linluke9]

oj, zapaskudze cala strone tym wpisem, ale ok:

 

po wpisaniu dmesg:

 

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8046 buckets, 32184 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: © 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 10:883:336
tty tty57: hash matches
rtc_cmos 00:06: setting system clock to 2010-05-27 15:18:20 UTC (1274973500)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata2.00: ATAPI: MATSHITADVD-RAM UJ-830S, 1.02, max UDMA/33
ata1.00: ATA-6: TOSHIBA MK4026GAX RoHS, PA107E, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA 
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4026GA PA10 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-830S  1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 432k freed
Write protecting the kernel text: 3496k
Write protecting the kernel read-only data: 1696k
psmouse serio1: ID: 10 00 64
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/input/input5
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
i915 0000:00:02.0: setting latency timer to 64
[drm] DAC-6: set mode 640x480 0
usb 3-2: new low speed USB device using uhci_hcd and address 2
fbcon: inteldrmfb (fb0) is primary device
render error detected, EIR: 0x00000010
[drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
render error detected, EIR: 0x00000010
[drm] LVDS-8: set mode 1024x768 d
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 3-2: New USB device found, idVendor=062a, idProduct=0000
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-2: configuration #1 chosen from 1 choice
input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-2/input0
dracut: Starting plymouth daemon
IBM TrackPoint firmware: 0x0e, buttons: 3/3
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04f8, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000007
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
dracut: Scanning devices sda2  for LVM volume groups 
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_mojkomputer" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_mojkomputer" now active
EXT4-fs (dm-0): barriers enabled
kjournald2 starting: pid 250, dev dm-0:8, commit interval 5 seconds
EXT4-fs (dm-0): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_mojkomputer-lv_root
dracut: Loading SELinux policy
type=1404 audit(1274973504.704:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux:  8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
SELinux:  75 classes, 144734 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1274973505.107:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
e100: Intel® PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright© 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd0201000, irq 11, MAC addr 00:0a:e4:39:bd:5c
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright © 2004-2005 Intel Corporation <[email protected]>
ipw2200: Intel® PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright© 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ipw2200 0000:02:02.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1WET82WW (2.02 ), EC 1VHT28WW-1.04
thinkpad_acpi: IBM ThinkPad R50e, model 1834SXG
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
thinkpad_acpi: brightness: will use unverified default: brightness_mode=2
thinkpad_acpi: brightness: please report to [email protected] whether it works well or not on your ThinkPad
input: ThinkPad Extra Buttons as /devices/virtual/input/input8
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 50168 usecs (2418 samples)
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
ppdev: user-space parallel port driver
ALSA sound/pci/ac97/ac97_codec.c:2163: MC'97 1 converters and GPIO not ready (0xff00)
ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-0): internal journal on dm-0:8
EXT4-fs (sda1): barriers enabled
kjournald2 starting: pid 757, dev sda1:8, commit interval 5 seconds
EXT4-fs (sda1): internal journal on sda1:8
EXT4-fs (sda1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 1015800k swap on /dev/mapper/vg_mojkomputer-lv_swap.  Priority:-1 extents:1 across:1015800k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
platform microcode: firmware: requesting intel-ucode/06-0d-08
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Microcode Update Driver: v2.00 removed.
p4-clockmod: P4/Xeon CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: © 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
eth1: no IPv6 routers present
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
type=1305 audit(1274973610.894:32364): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
fuse init (API version 7.12)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: New USB device found, idVendor=0951, idProduct=1625
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DT 101 II
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 0014785448B1F9B0A75F0CE4
usb 1-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     Kingston DT 101 II        1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 7818184 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-3: USB disconnect, address 3
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
usb 3-1: new full speed USB device using uhci_hcd and address 3
usb 3-1: New USB device found, idVendor=06b9, idProduct=4061
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Speed Touch 330 
usb 3-1: Manufacturer: THOMSON
usb 3-1: SerialNumber: 000E5091F810
usb 3-1: configuration #1 chosen from 1 choice
NET: Registered protocol family 8
NET: Registered protocol family 20
usb 3-1: reset full speed USB device using uhci_hcd and address 3
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4.00
usbcore: registered new interface driver speedtch
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin
speedtch 3-1:1.0: speedtch_find_firmware: no stage 1 firmware found!
PPP generic driver version 2.4.2
usb 3-2: USB disconnect, address 2
usb 3-1: USB disconnect, address 3
Clocksource tsc unstable (delta = -67237133 ns)
usb 3-2: new low speed USB device using uhci_hcd and address 4
usb 3-2: New USB device found, idVendor=062a, idProduct=0000
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-2: configuration #1 chosen from 1 choice
input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
generic-usb 0003:062A:0000.0002: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-2/input0
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: New USB device found, idVendor=0951, idProduct=1625
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DT 101 II
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 0014785448B1F9B0A75F0CE4
usb 1-3: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access     Kingston DT 101 II        1.00 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 7818184 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-3: USB disconnect, address 5
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
usb 3-1: new full speed USB device using uhci_hcd and address 5
usb 3-1: New USB device found, idVendor=06b9, idProduct=4061
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Speed Touch 330 
usb 3-1: Manufacturer: THOMSON
usb 3-1: SerialNumber: 000E5091F810
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset full speed USB device using uhci_hcd and address 5
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4
speedtch 3-1:1.0: found stage 1 firmware speedtch-1.bin.4
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4
speedtch 3-1:1.0: found stage 2 firmware speedtch-2.bin.4
ATM dev 0: ADSL line is synchronising
ATM dev 0: ADSL line is up (640 kb/s down | 160 kb/s up)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
usbcore: deregistering interface driver speedtch
ATM dev 0: usbatm_complete: urb 0xdd98f780 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xdd98f280 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xdd98f580 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xdd98f600 failed (-2)!
usbcore: registered new interface driver speedtch
ATM dev 0: ADSL line is blocked?
usbcore: deregistering interface driver speedtch
ATM dev 0: usbatm_complete: urb 0xddd60480 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xddd60c00 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xddd60300 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xddd60880 failed (-2)!
usbcore: registered new interface driver speedtch
ATM dev 0: ADSL line is blocked?
ATM dev 0: usbatm_complete: urb 0xdf33b780 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdf33b000 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdf33bb80 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdf33bf80 failed (-84)!
usb 3-1: USB disconnect, address 5
usb 1-3: new high speed USB device using ehci_hcd and address 7
usb 1-3: New USB device found, idVendor=0951, idProduct=1625
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DT 101 II
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 0014785448B1F9B0A75F0CE4
usb 1-3: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access     Kingston DT 101 II        1.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 7818184 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-3: USB disconnect, address 7
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
usb 3-1: new full speed USB device using uhci_hcd and address 6
usb 3-1: New USB device found, idVendor=06b9, idProduct=4061
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Speed Touch 330 
usb 3-1: Manufacturer: THOMSON
usb 3-1: SerialNumber: 000E5091F810
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset full speed USB device using uhci_hcd and address 6
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4
speedtch 3-1:1.0: found stage 1 firmware speedtch-1.bin.4
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4
speedtch 3-1:1.0: found stage 2 firmware speedtch-2.bin.4
ATM dev 0: ADSL line is synchronising
ATM dev 0: ADSL line is up (640 kb/s down | 160 kb/s up)
usbcore: deregistering interface driver speedtch
ATM dev 0: usbatm_complete: urb 0xdd6f6600 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xdd6f6a00 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xdd6f6200 failed (-2)!
ATM dev 0: usbatm_complete: urb 0xdd6f6400 failed (-2)!
usbcore: registered new interface driver speedtch
ATM dev 0: ADSL line is blocked?
ATM dev 0: usbatm_complete: urb 0xdd98f500 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98f700 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98ff00 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98fe00 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98f500 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98f700 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98ff00 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98fe00 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98f500 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xdd98f700 failed (-84)!
usb 3-1: USB disconnect, address 6
usb 3-1: new full speed USB device using uhci_hcd and address 7
usb 3-1: New USB device found, idVendor=06b9, idProduct=4061
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Speed Touch 330 
usb 3-1: Manufacturer: THOMSON
usb 3-1: SerialNumber: 000E5091F810
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset full speed USB device using uhci_hcd and address 7
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4
speedtch 3-1:1.0: found stage 1 firmware speedtch-1.bin.4
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4
speedtch 3-1:1.0: found stage 2 firmware speedtch-2.bin.4
ATM dev 0: ADSL line is synchronising
ATM dev 0: ADSL line is up (640 kb/s down | 160 kb/s up)
__ratelimit: 2 callbacks suppressed
ATM dev 0: usbatm_complete: urb 0xddd60700 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60480 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60080 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60900 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60700 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60480 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60080 failed (-84)!
ATM dev 0: usbatm_complete: urb 0xddd60900 failed (-84)!
usb 3-1: USB disconnect, address 7
usb 3-1: new full speed USB device using uhci_hcd and address 8
usb 3-1: New USB device found, idVendor=06b9, idProduct=4061
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Speed Touch 330 
usb 3-1: Manufacturer: THOMSON
usb 3-1: SerialNumber: 000E5091F810
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset full speed USB device using uhci_hcd and address 8
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.4
speedtch 3-1:1.0: found stage 1 firmware speedtch-1.bin.4
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4.00
speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.4
speedtch 3-1:1.0: found stage 2 firmware speedtch-2.bin.4
ATM dev 0: ADSL line is synchronising
ATM dev 0: ADSL line is up (640 kb/s down | 160 kb/s up)

 

z gory wybaczcie za tak ogromny wpis...

Edytowane Maj 27, 2010 przez WalDo

[linluke9]

po wpisaniu tych komend:

 

[root@Moj-Komputer Linnet]# cat /etc/ppp/peers/linnet
user "tu moj login"
lock
noipdefault
defaultroute
hide-password
lcp-echo-interval 20
lcp-echo-failure 3
connect /bin/true
persist
noauth
noaccomp
holdoff 4
default-asyncmap
plugin pppoatm.so 0.35
usepeerdns
[root@Moj-Komputer Linnet]# cat /etc/ppp/chap-secrets
"login" * "moje haslo" *
[root@Moj-Komputer Linnet]# 

 

 

zaczynam podejrzewac czy ja (_napewno_ → na pewno) ORT podalem wlasciwe haslo lub login podczas instalcji neo linnetem

Edytowane Maj 27, 2010 przez WalDo

[@WalDo]

[OFF TOPIC]

oj, zapaskudze cala strone tym wpisem, ale ok:

Nie, nie jest OK. Przy wklejaniu długich listingów korzystaj ze znaczników codebox - po lewej stronie okna edycji link "Wstaw: CODEBOX"

 

[linluke9]

ok bede pamietac na przyszlosc

 

poki co wciaz bez fedorowego netu

[thof]

[root@Moj-Komputer Linnet]# cat /etc/ppp/peers/linnet
user "tu moj login"
...
[root@Moj-Komputer Linnet]# cat /etc/ppp/chap-secrets
"login" * "moje haslo" *

Może jednak zastanów się jeszcze raz czy przesiadka na linuksa to dobry pomysł

 

[linluke9]

hmmm, nie rozumiem czemu to zly pomysl, pewnie robie glupie bledy ale kazdy ma do tego prawo

poza tym udalo mi sie z neostrada pod mandriva, co prawda z pomoca spolecznosci ale jednak, czyzby fedora az tak bardzo sie roznila?

 

z cieakowsci wpisalem tak:

 

root@Moj-Komputer Linnet]# ./linnet s
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

ppp0: error fetching interface information: Device not found
ppp0: error fetching interface information: Device not found
Twoj adres IP: 
Pakiety: 
Bledne pakiety(errors): 
Bledne pakiety(dropped): 
Bledne pakietow(overruns): 
Bledne pakietow(frame): 
Odebrane:  MiB
Wyslane:  MiB
[root@Moj-Komputer Linnet]# ./linnet p
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

Plugin pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:0.35
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: permission denied
CHAP authentication failed
Connection terminated.
Modem hangup
[root@Moj-Komputer Linnet]# modprobe speedtch
[root@Moj-Komputer Linnet]# /sbin/lsmod | grep speedtch
speedtch               12196  0 
usbatm                 14572  1 speedtch
[root@Moj-Komputer Linnet]# 

 

nie wiem czy czasem nie pdoalem blednego hasla lub loginu przy instalacje neo i stad ten balagan ale nie jestem pewien, wlasnie probuje sie dodzwonic do tp.sa by sprawdzic czy nie zrobilem podstawowego bledu...

[linluke9]

W tym miejscu:

[root@Moj-Komputer Linnet]# cat /etc/ppp/peers/linnet
user "tu moj login"
...
[root@Moj-Komputer Linnet]# cat /etc/ppp/chap-secrets
"login" * "moje haslo" *

 

oczywiscie wpisalem "tu moj login", "login", "moje haslo" celowo bo nie chcialem ich podawac, o ile to nie jest wymagane by mi pomoc z ta neostrada

jesli o to chodzi odnosnie moje zastanowienia sie nad linuksem...

[borzole]

* raz w życiu podłączałem speedtouch i tak się tym zmęczyłem, że to opisałem

http://wiki.fedora.pl/wiki/Modem_SpeedTouch_330

może Ci to coś rozjaśni, bo ten linet to czarna skrzynka dla mnie.

 

* Twoje obycie z linuksem jest tak minimalne, że proponuję Ci:

- zainstalować system na VirtualBox w minimalnym stanie (płytka netinstall będzie super), a ile się przy tym napłaczesz to głowa mała

- ustawić na wirtualnej maszynie połączenie za NAT (chyba domyślnie jest włączony), dla ułatwienia

- nauczyć się przez 2 tygodnie ile tylko można konsoli

- pobrać na maszynkę wszystko co potrzeba do zrobienia połączenia modemu

- wyłączyć NAT na wirtualce, zamiast tego udostępnić USB na którym jest modem bezpośrednio do wirtualnego systemu (to się da zwyczajnie wyklikać).

- praktyka czyni mistrza, a klikaniem jeszcze się nikt niczego nie nauczył

 

[linluke9]

chyba sie udalo:

 

[root@Moj-Komputer Linnet]# ./linnet
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

Parametry programu:
i - instalacja
p - polaczenie z internetem
s - status polaczenia z internetem
r - rozlaczenie z internetem
a - dodanie programu do autostartu
Dla przykladu:
./linnet -i
[root@Moj-Komputer Linnet]# ./linnet -i
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

Opcje instalacyjne. Wybierz wlasciwa:
1-Sprawdzenie systemu czy jest gotowy do instalacji
2-Instalacja(modemu+konfiguracja polaczenia)
3-Instalacja(modemu)
4-Instalacja(konfiguracja polaczenia)
2
Twoj modem to: Speedtouch
Konfiguracja modemu zakonczona pomyslnie
Prosze wybrac swojego dostawce internetu:
1-Neostrada
2-Netia(linia tp)
3-Netia(linia netii)
1
Podaj swoj login:[email protected]
Podaj swoje haslo:xxxxxxx
Polaczenie nawiazujemy poprzez wydanie komendy: "pppd call linnet"
Lub poprzez uruchomienie ./linnet p
[root@Moj-Komputer Linnet]# ./linnet p
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

Plugin pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:0.35
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: duplicate address detected
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: duplicate address detected
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication failed: duplicate address detected
CHAP authentication failed
Connection terminated.
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication succeeded
CHAP authentication succeeded
local  IP address 83.5.255.204
remote IP address 83.1.4.1
primary   DNS address 194.204.159.1
secondary DNS address 194.204.152.34
[root@Moj-Komputer Linnet]# ./linnet s
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

Twoj adres IP: 83.5.255.204
Pakiety: 4
Bledne pakiety(errors): 0
Bledne pakiety(dropped): 0
Bledne pakietow(overruns): 0
Bledne pakietow(frame): 0
Odebrane: 152.0 MiB
Wyslane: 94.0 MiB
[root@Moj-Komputer Linnet]# ./linnet s
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

Twoj adres IP: 83.5.255.204
Pakiety: 4
Bledne pakiety(errors): 0
Bledne pakiety(dropped): 0
Bledne pakietow(overruns): 0
Bledne pakietow(frame): 0
Odebrane: 152.0 MiB
Wyslane: 94.0 MiB
[root@Moj-Komputer Linnet]# ./linnet r
_ _                  _      ___   _
| (_)_ __  _ __   ___| |_   / _ \ / |
| | | '_ \| '_ \ / _ \ __| | | | || |
| | | | | | | | |  __/ |_  | |_| || |
|_|_|_| |_|_| |_|\___|\__|  \___(_)_|
Strona projektu: www.linnet.cba.pl

[root@Moj-Komputer Linnet]# pppd call linnet
Plugin pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:0.35
Using interface ppp0
Connect: ppp0 <--> 0.35
CHAP authentication succeeded
CHAP authentication succeeded
local  IP address 83.11.59.87
remote IP address 83.1.4.1
primary   DNS address 194.204.159.1
secondary DNS address 194.204.152.34
[root@Moj-Komputer Linnet]# 

 

co moge zrobic dalej? czy to oznacza ze internet chodzi? firefox nie dziala, co moge zrobic?

[borzole]

jeśli polecenie ping -c 4 onet.pl generuje 4 linie tej postaci

64 bytes from s4.m1r2.onet.pl (213.180.146.27): icmp_seq=1 ttl=58 time=56.7 ms

...

to internet działa

 

[linluke9]

[root@Moj-Komputer Linnet]# ping -c 4 onet.pl
ping: unknown host onet.pl
[root@Moj-Komputer Linnet]# 

 

czy to oznacza ze jednak nie dziala?

 

gdy pisze ./linnet s top podaje ile odebral/wyslal